Harman-Kardon HS 500 owner manual Antennas, Remote IR Input and Output

Page 18

CONNECTIONS

Do not confuse component video connections with composite video (described above). Although the plugs and jacks may look similar, they are not compatible and cross-connecting them will result in no picture or a very distorted picture. Remember that component video uses three connections, colored green, blue and red, while composite video uses a single connection, which is often color-coded yellow.

Component video cable

Figure 10 – Component Video

If it’s available on your video display, HDMI is recommended as the best-quality connection, followed in preference by component video, S-video and then composite video.

Antennas

The HS 500 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.

The FM antenna uses a 75-ohm F-connector. See Figure 11.

Figure 11 – FM Antenna

The AM loop antenna needs to be assembled. Then connect the two leads to the spring terminals on the receiver, being certain to connect the white wire to the terminal marked “AM”, and the black wire to the terminal marked “GND.” See Figure 12.

Figure 12 – AM Antenna

Remote IR Input and Output

The HS 500 is equipped with an infrared input and output to facilitate use of your system with a remote control in a variety of situations.

When the HS 500 is placed in such a way that aiming the remote at the front-panel IR sensor is difficult, such as inside a cabinet or facing away from the listener, you may connect an external IR receiver, such as the optional Harman Kardon HE 1000, to the Remote IR Input jack.

If any of your source devices are equipped with a compatible remote IR input, you may use a 1/8" mini-plug interconnect cable (not included) to connect the Remote IR Output to the source device’s remote IR input, which will pass any applicable remote signals transmitted through the HS 500 to the source device. This enables you to control your sources even when the HS 500 itself is controlled via an external IR receiver.

To control more than one source device using the Remote IR Output, connect all sources in “daisy chain” fashion, with the HS 500’s Remote IR Output connected to the first device’s remote IR input, that device’s remote IR output connected to the next device’s remote IR input, and so forth.

NOTE: Not all remote controllable devices are equipped with compatible IR inputs and outputs. Check with the manufacturer of the source device for more information on the type of IR signal expected. The HS 500 will output a “stripped carrier” IR signal.

18

18

Image 18
Contents Integrated Home Theater System Safety Information Safety Information Important Safety InformationStaple Invoice Here Table of Contents HS 500 5.1-Channel DVD Receiver Audio Inputs IntroductionThank you for choosing Harman Kardon Digital Audio InputsEase of Use Supplied AccessoriesOutputs DVD PlayerStandby/On Switch This is an electrical switch that turns FRONT-PANEL ControlsPower Subwoofer Output Connect a powered subwoofer to this jack REAR-PANEL ConnectionsHdmi Remote Control Functions Remote Control Functions Remote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioConnecting External Source Devices to the HS ConnectionsVideo Connections Audio ConnectionsDigital Audio Digital Video ConnectionsAntennas Remote IR Input and OutputSpeaker Placement SubwooferStep Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasRecommended Source Component Connections Audio/Video RecorderTV, Cable, Satellite, Hdtv Step Seven Insert Batteries in Remote Step Six Plug In AC PowerStep Five Connect Video Display Digital Camera, Flash Drive, Hard Disc DriveInstallation Steps Remote Control CodesDevice Types for AUX and D-IN Source Selectors Step Nine Turn On the HS Enter the numeric codeInstallation Initial Setup Using the On-Screen Menu SystemStep One System Setup Off Any DVD may be viewed without entering the password Level 2 Intermediate level between the PG and G ratingsParental Control Ratings Step Two Audio Setup Step Three Configure SpeakersStep Four Video Setup Video Setup SubmenuStep Five Video Adjustments Two choices are availableBrightness Adjustment Contrast AdjustmentColor and Tint Adjustment Step Six Configure Sources TV Source MenuTurning On the HS Volume ControlOperation Mute FunctionHeadphones Source SelectionDisc Loading Precautions Disc Handling PrecautionsDisc Cleaning Precautions Playback BasicsPlayback Features for DVD and CD Discs Load CDs or DVD-Audio discs, with the label side upIf a CD is detected, playback will begin automatically Operation Playback Resume Using a DVD’s MenuZoom Disc RecognitionPlayer Information Menu Disc This line displays the disc typeOn-Screen Status Display Titles and GroupsChapters and Tracks Audio Soundtracks Subtitles DVD-Video Discs OnlyAngles DVD-Video Discs Only Repeat Play B Repeat ButtonCD Playback TracksPress the A-B Repeat Button again to cancel Repeat A-B mode Random PlayMP3, Windows Media and Jpeg Playback MP3 or WMA Disc PlaybackJpeg Playback Simultaneous PlaybackSlide Shows Status Bar ZoomPlayback Control Programming a Playlist Editing a Programmed Playlist Using the HS 500 TunerCanceling a Programmed Playlist Press the Play button to begin playSelect a preset station by following one of these steps Programming PresetsTV Source Selecting an External SourceRecording Auxiliary SourceAudio This setting allows you to select a surround mode USB SourceDisc Identifies the type of files found on the device Advanced Functions Advanced Remote Control FunctionsResetting the Remote Punch-Through ProgrammingProcessor Reset MemoryTroubleshooting Guide Appears Selection Language Menu Ø symbol appearsPassword not accepted Incorrect OSD languageHS 500 Technical Specifications NtscGlossary GlossaryGlossary Table A2 Audio Setup Menu Settings Appendix Default settings, worksheets, remote product codesTable A1 System Setup Menu Settings Table A3 Audio Adjustments Menu Bass ManagementTable A6 Source Input Settings Table A4 Video Setup MenuTable A5 Video Adjustments Menu Table A7 Remote Control CodesRemote Control Function List Reference Table A8 Remote Control Function List CBL/SATPIP Table A9 Remote Control Product Codes TV Table A10 Remote Control Product Codes Tape Table A9Table A11 Table A11 Remote Control Product Codes VCR Table A11 Table A12Table A13 Remote Control Product Codes SAT Table A13Table A14 DVD Language Codes

HS 500 specifications

The Harman-Kardon HS 500 is a captivating all-in-one audio system that merges modern design with exceptional sound performance, making it an ideal choice for audio enthusiasts seeking a comprehensive home entertainment solution. This system effortlessly combines a CD player, a high-quality amplifier, and a digital radio tuner, providing a versatile platform for enjoying various audio formats and sources.

One of the standout features of the HS 500 is its support for high-resolution audio playback. The system accommodates a wide range of audio formats, including MP3, AAC, WAV, and FLAC, ensuring that users can enjoy their favorite music in remarkable clarity and fidelity. Coupled with advanced D/A conversion technology, the HS 500 delivers an impressive dynamic range and minimizes distortion, resulting in an enriched listening experience.

The design of the HS 500 is sleek and modern, characterized by a compact form factor that enables it to fit seamlessly into any home environment. The system's intuitive interface features a large, easy-to-read display and well-placed controls, making navigation a breeze. Harman-Kardon has ensured that both aesthetics and functionality are prioritized, allowing users to engage with their music effortlessly.

Connectivity is another key feature of the HS 500. The system includes multiple inputs such as USB, AUX, and optical digital connections, enabling compatibility with various devices, from smartphones to laptops. Wireless capabilities, including built-in Bluetooth, allow for effortless streaming from compatible devices, giving users the freedom to enjoy their music collection without being tethered by wires.

Additionally, the HS 500 incorporates advanced sound technologies such as Harman's proprietary Digital Signal Processing (DSP) to optimize audio performance. This technology tailors the sound output for different environments, ensuring that rich, balanced sound fills the room, whether you’re enjoying a quiet evening or hosting a lively gathering.

The HS 500 is also equipped with a range of enhancing features, including adjustable EQ settings, multiple listening modes, and a built-in alarm clock, making it a multifaceted device suitable for various audio needs.

Overall, the Harman-Kardon HS 500 stands out as a premium audio system that combines high-quality sound, versatile connectivity, and a stylish design, setting a benchmark for home entertainment devices in its category.