Harman-Kardon HS 500 owner manual Jpeg Playback, Simultaneous Playback, Slide Shows

Page 47

Due to the differences in various versions of the MP3 and WMA formats, and the many differences between the CD-R machines used to record discs on a computer, it is possible that some discs may not play on the HS 500 even though they will work on a computer. This is normal and does not indicate a fault with the unit.

When a multisession disc with both standard CD audio and MP3 or WMA content is in use, the HS 500 will play only the CD audio sections of the disc. Track numbers will be visible in the display, but the files will not be decoded.

If a disc containing MP3, WMA and/or JPEG files is created in more than one session, the HS 500 may not recognize files added during the later sessions, especially if the disc was finalized after the first session.

When a disc with multiple folders is playing, only tracks from one folder can be displayed and played at a time. Select the desired folder and press the Play Button or Enter Button to start the first track. To see and play tracks from other folders, you must first select the root folder using the Navigation Buttons, and press the Enter Button to open or close that folder. You may then navigate an open folder and select the desired folder. Press the Enter Button to open the folder, and select the desired track. Then press the Play Button.

Only stereo-audio playback is available for MP3 and WMA discs.

Programmed playlists are not available for MP3/WMA discs.

Use the Navigation Buttons to select the DISC INFO Submenu icon on the left side of the screen, and press the Enter Button to view it. If the disc contains ID3 tag information, then the current MP3 track information – song title, artist, album, year, genre, and any comments – for WMA and JPEG files, only the file name will appear.

JPEG Playback

The HS 500 is capable of recognizing JPEG still-image files and dis- playing them. When a disc or folder containing JPEG files is loaded, the JPEG Disc-Type Indicator will light in the Main Information Display. The disc will immediately begin displaying the images on the disc in order.

When viewing JPEG images, the Angle Button may be used to rotate the image. With the image onscreen, press the Angle Button once to display the current orientation of the image, usually +0. Press the Angle Button again to rotate the image clockwise 90 degrees. Each additional press of the Angle Button will continue to rotate the image clockwise by 90 degrees.

You may use the Zoom Button to enlarge a JPEG image, and the Navigation Buttons to explore the enlarged image.

OPERATION

You may view thumbnails of the images in the selected folder by press- ing the Disc Menu Button. When the images appear on screen, you may use the Navigation Buttons to move the picture frame until the desired image is selected. Press the Enter Button to display a full-size view of that image. See Figure 77.

Figure 77 – Thumbnail Image Menu

Simultaneous Playback

When MP3 audio files are stored on the same disc as the JPEG still- image files, you may simultaneously play the audio and view the still images. To access each set of folders, i.e., audio and still-image, select both the Music and Picture icons on the left side of the screen. See Figure 78. Each click on one of the icons selects or deselects the relevant folders for listening or viewing. For WMA files, you may only select one of the icons at a time, as simultaneous playback is not available for JPEG and WMA files.

Figure 78 – Simultaneous Playback

NOTE: High-resolution images may not display correctly during simultaneous playback due to the HS 500’s memory limitations.

Slide Shows

If several JPEG still-image files are available in the selected folder, the HS 500 will display them in turn automatically as a “slide show.” You may program the amount of time each still image remains on screen using the Picture setting in the Player Information menu. See Figure 79. Select from a viewing time of 15, 30 or 45 seconds, or when simulta- neous playback with MP3 audio files is desired, you may program the HS 500 to synchronize display of the still images to the audio track by selecting the Follow Audio Track option.

Figure 79 – Picture Viewing Time

47

Image 47 Contents
Integrated Home Theater System Safety Information Important Safety Information Safety InformationStaple Invoice Here Table of Contents Digital Audio Inputs IntroductionThank you for choosing Harman Kardon HS 500 5.1-Channel DVD Receiver Audio InputsDVD Player Supplied AccessoriesOutputs Ease of UseFRONT-PANEL Controls Standby/On Switch This is an electrical switch that turnsPower REAR-PANEL Connections Subwoofer Output Connect a powered subwoofer to this jackHdmi Remote Control Functions Remote Control Functions Remote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemConnections Connecting External Source Devices to the HSDigital Video Connections Audio ConnectionsDigital Audio Video ConnectionsRemote IR Input and Output AntennasSubwoofer Speaker PlacementStep Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferTV, Cable, Satellite, Hdtv Recommended Source Component ConnectionsAudio/Video Recorder Digital Camera, Flash Drive, Hard Disc Drive Step Six Plug In AC PowerStep Five Connect Video Display Step Seven Insert Batteries in RemoteDevice Types for AUX and D-IN Source Selectors Installation StepsRemote Control Codes Enter the numeric code Step Nine Turn On the HSInstallation Step One System Setup Initial SetupUsing the On-Screen Menu System Level 2 Intermediate level between the PG and G ratings Off Any DVD may be viewed without entering the passwordParental Control Ratings Step Three Configure Speakers Step Two Audio SetupVideo Setup Submenu Step Four Video SetupTwo choices are available Step Five Video AdjustmentsColor and Tint Adjustment Brightness AdjustmentContrast Adjustment TV Source Menu Step Six Configure SourcesMute Function Volume ControlOperation Turning On the HSSource Selection HeadphonesPlayback Basics Disc Handling PrecautionsDisc Cleaning Precautions Disc Loading PrecautionsIf a CD is detected, playback will begin automatically Playback Features for DVD and CD DiscsLoad CDs or DVD-Audio discs, with the label side up Operation Disc Recognition Using a DVD’s MenuZoom Playback ResumeDisc This line displays the disc type Player Information MenuChapters and Tracks On-Screen Status DisplayTitles and Groups Angles DVD-Video Discs Only Audio SoundtracksSubtitles DVD-Video Discs Only B Repeat Button Repeat PlayTracks CD PlaybackRandom Play Press the A-B Repeat Button again to cancel Repeat A-B modeMP3 or WMA Disc Playback MP3, Windows Media and Jpeg PlaybackSlide Shows Jpeg PlaybackSimultaneous Playback Playback Control Status BarZoom Programming a Playlist Press the Play button to begin play Using the HS 500 TunerCanceling a Programmed Playlist Editing a Programmed PlaylistProgramming Presets Select a preset station by following one of these stepsAuxiliary Source Selecting an External SourceRecording TV SourceDisc Identifies the type of files found on the device Audio This setting allows you to select a surround modeUSB Source Punch-Through Programming Advanced Remote Control FunctionsResetting the Remote Advanced FunctionsMemory Processor ResetTroubleshooting Guide Incorrect OSD language Language Menu Ø symbol appearsPassword not accepted Appears SelectionNtsc HS 500 Technical SpecificationsGlossary GlossaryGlossary Table A3 Audio Adjustments Menu Bass Management Appendix Default settings, worksheets, remote product codesTable A1 System Setup Menu Settings Table A2 Audio Setup Menu SettingsTable A7 Remote Control Codes Table A4 Video Setup MenuTable A5 Video Adjustments Menu Table A6 Source Input SettingsRemote Control Function List Reference CBL/SAT Table A8 Remote Control Function ListPIP Table A9 Remote Control Product Codes TV Table A9 Table A10 Remote Control Product Codes TapeTable A11 Table A11 Remote Control Product Codes VCR Table A12 Table A11Table A13 Table A13 Remote Control Product Codes SATTable A14 DVD Language Codes