Genie 3630436275 warranty Safety Features, Instructions­

Page 3

OVERVIEW OF POTENTIAL HAZARDS

Overhead doors are large, heavy objects that move with the help of springs under high tension and electric­ motors.. Since moving objects, springs

under tension, and electric motors can cause injuries, your safety and the safety of others depend on you reading­ the information­ in this manual.. If you have questions or do not understand the information ­presented, call The Genie Company.. or your local Genie Distributor..

In this section, and those that follow, the words Danger, Warning and Caution are used to emphasize important safety information.. The word:

DANGER: indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury..

WARNING: indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury..

CAUTION: indicates a potentially hazardous situation which, if not avoided, may result in injury or property damage.. The word NOTE is used to indicate important steps to be followed or important considerations..

 

 

POTENTIAL HAZARD

EFFECT

PREVENTION

 

 

 

 

 

 

 

 

 

WARNING:

• Keep people clear of opening­

while door is moving­

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Could result in death

• Do Not allow children to play with the door operator­

..

 

 

 

 

MOVING DOOR

or serious injury..

• Do Not operate a door that jams or one that has a broken­

spring..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING:

• Turn off power before removing operator cover.

 

 

 

 

 

 

 

 

 

• When replacing cover, make sure wires are not pinched or near

 

 

 

 

 

Could result in death

 

 

 

 

 

moving parts..

 

 

 

 

 

 

 

 

 

 

 

or serious injury..

 

 

 

 

 

 

 

 

 

 

 

• Operator must be properly grounded.

 

 

 

 

 

 

ELECTRICAL SHOCK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Do Not try to remove, repair or adjust springs or anything to

 

 

 

 

 

WARNING:

which door spring parts are ­fastened, such as, wood blocks,

 

 

 

 

 

steel brackets, cables or other like items..

 

 

 

 

 

 

 

 

 

Could result in death

 

 

 

 

 

 

 

 

 

or serious injury..

• Repairs and adjustments must be made by a trained door

 

 

 

HIGH SPRING TENSION

 

system technician using proper­

tools and instructions­

..

 

Important ­Installation Instructions

WARNING:

To reduce the risk of severe injury or death:

1READ AND FOLLOW ALL SAFETY, INSTALL­ATION AND

OPERATION INSTRUCTIONS­.. If you have any questions or do not understand an instruction, call your authorized Genie installation professional..

2Do Not install operator on an improperly balanced­ door.. An improperly balanced door could cause

severe injury.. Repairs and adjustments­ to cables,

spring assembly,­ and other hardware must be made by a trained service person using proper tools and

instructions­ ..

3Remove all ropes, and disable all locks connected to the door before installing operator..

4Install door operator 7 feet or more above the floor.. Mount the emergency release knob 6 feet above the floor..

5Do Not connect the operator to the source of power until instructed to do so..

6Locate the control button:

•Within sight of door.

•At a minimum height of 5 feet, so small children­ cannot reach it.

•Away from all moving parts of the door.

7Install the entrapment WARNING label next to the wall button or console.. Install the emergency release tag on, or next to, the emergency release

8The operator must reverse when the door contacts­ a

1-1/2 inch high object on the floor at the center­ of the doorway.. This is about the size of a 2” x 4” board laid flat..

Safety Features

Safe-T-Beam® (STB) Non-Contact Reversing System

Places an invisible beam across door opening, that reverses the door during down travel to the fully open position if anything passes through beam..

Safe-T-Reverse® Contact Reversing System

Automatically stops and reverses a closing door within­ 2 seconds of contact with an object..

Safe-T-Stop® Timed Reversed System

Automatically opens a closing door, if door does not close within 30 seconds..

ForceGuard® Control

Used to set the force required for opening and closing door.. For maximum safety, set the minimum force required to fully open and close door..

Automatic Lighting System

Light bulbs up to 60 Watts max.. , used for safer entries and exits.. The lights turn on when door is activated and automatically turn off 4..5 ­minutes later..

Manual Emergency Release

Allows the garage door to be opened or closed manually for emergencies or maintenance..

For Help, call 1-800-35-GENIE or visit www.geniecompany.com

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DC Powered Screw Drive Opener Entrapment Warning Label To be Adhered Manual 1 Warranty InformationGenie Company Limited Warranty Service From Authorized DealersInstructions­ Safety FeaturesCheck following items before assembling Opener Tools used in this sectionCheck Check Ceiling for Grounded Power Source Mounting AreaMounting Bracket Location Test Opener monthly.. The door Must reverse on contact with Check Recommended toolsCheck emove xisting arage Door Locks Wood for header, ceiling, and/or door braces storeOn pg Little effort is required to turn the Force Adjusting KnobsAdjustment 1 Adjusting Limit Switches and Force Controls Do Not Unplug the Unit simply waitMoving garage door may cause serious injury or death AccessoriesEach Remote Control must be programmed separately Transmitter Compliance StatementTo Replace Remote Control Battery Install Light Bulbs and LensRemote Control Operation To Erase All Remotes from Power Head MemoryBLINKS, Pause Safe-T-Beam System Self-Diagnostic TroubleshootingSource Red LED Sensor Green LED Possible Problem Solution GenieOpener You See Problem What to Do ReferenceDoor hardware or rollers may result in a ONE-BLINK signal Check door condition.. Note This Opener is equipped with anProblem What To Do General Troubleshooting Always Check the Status LED LightOpening Cover May Result in Electric Shock Wiring DiagramPower Head Assembly Exploded View QuantityPart Name Hardware Exploded View Instructions Commandant Ordering InstructionsLas Instrucciones que Ordenan

3630436275 specifications

The Genie 3630436275 is an innovative piece of equipment that exemplifies cutting-edge technology in the field of aerial work platforms. Engineered with the latest advancements, this versatile lift offers the perfect solution for various construction and maintenance tasks, enabling operators to work safely and efficiently at significant heights.

One of the standout features of the Genie 3630436275 is its impressive working height. With the ability to reach heights that facilitate work on large buildings, infrastructure, and even indoor projects, this lift ensures that users can access challenging spots without compromising safety. The model's compact design allows it to navigate through tight spaces often found in urban construction zones, making it especially suitable for indoor applications as well.

The Genie 3630436275 is equipped with advanced hydraulic systems that provide smooth and responsive lift operation. These mechanisms enable quick ascent and descent, greatly reducing downtime during projects. Additionally, its robust construction guarantees durability and reliability, enabling it to withstand the rigors of continuous use in various environments.

Safety is paramount when it comes to aerial work platforms, and the Genie 3630436275 does not disappoint in this regard. It features multiple safety mechanisms, such as a sturdy guardrail system, emergency stop buttons, and load sensors that ensure operators are working within safe limits. The platform is designed with non-slip surfaces, enhancing grip and stability while working at height.

The technology incorporated into the Genie 3630436275 also includes an intuitive control system that provides operators with precise handling capabilities. The user-friendly interface allows for straightforward control, whether navigating through a job site or setting the lift to the desired height.

Battery-powered options for the Genie 3630436275 further complement its environmentally friendly profile. With quieter operation compared to traditional fuel-powered lifts, it is well-suited for use in noise-sensitive areas or during off-hours work.

In conclusion, the Genie 3630436275 is a versatile, high-performing aerial lift that combines innovative technology, durable construction, and an emphasis on safety. With its array of features, it serves as an essential tool for professionals across various industries, streamlining access to elevated work areas while prioritizing user safety and convenience. This model is an excellent choice for those seeking reliability and efficiency in their aerial work platform solutions.
Top Page Image Contents