Genie 3563435770 Safe-T-Beam STB Non-Contact Reversing System, Safe-T-Stop Timed Reversed System

Page 3

OVERVIEW OF POTENTIAL HAZARDS

Garage Doors are heavy objects that move with the help of springs under high tension and electric motors. Since moving objects,springs under tension,and electric motors can cause injuries, your safety and the safety of others depend on you reading the information in this man- ual. If you have questions or do not understand the information presented, call your nearest service representative.

In this section,and those that follow,the words Danger, Warning and Caution are used to emphasize important safety information.The word:

DANGER: indicates an imminently hazardous situation which,if not avoided,will result in death or serious injury.

WARNING: indicates a potentially hazardous situation which,if not avoided,could result in death or serious injury.

CAUTION: indicates a potentially hazardous situation which,if not avoided,may result in injury and property damage. The word NOTE is used to indicate important steps to be followed or important information.

POTENTIAL HAZARD

EFFECT

PREVENTION

 

WARNING:

• Keep people clear of opening while door is moving.

 

Can Cause Serious

• Do Not allow children to play with the door operator.

MOVING DOOR

Injury or Death

• Do Not operate a door that jams or one that has a broken spring.

 

 

 

WARNING:

• Turn off power before removing operator cover.

 

• When replacing cover, make sure wires are not pinched or near

 

Can Cause Serious

 

moving parts.

 

Injury or Death

 

• Operator must be properly grounded.

ELECTRICAL SHOCK

 

 

 

 

 

• Do Not try to remove, repair or adjust springs or anything to

 

WARNING:

which door spring parts are fastened, such as, wood blocks,

 

steel brackets, cables or other like items.

 

Can Cause Serious

 

Injury or Death

• Repairs and adjustments must be made by a trained service

HIGH SPRING TENSION

 

person using proper tools and instructions.

IMPORTANT INSTALLATION

INSTRUCTIONS

WARNING:

TO REDUCE THE RISK OF SEVERE INJURY OR DEATH:

1READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS. If you have any questions or do not understand an instruction, call your service representative.

2Do Not install operator on an improperly balanced door. An improperly balanced door could cause severe injury. Repairs and adjustments to cables, spring assembly, and other hardware must be made by a trained service person using proper tools and instructions.

3Remove all ropes, and disable all locks connected to the door before installing operator.

4Install door operator 7 feet or more above the floor. Mount the emergency release knob 6 feet above the floor.

5Do Not connect the operator to the source of power until instructed to do so.

6Locate the control button:

Within sight of door.

At a minimum height of 5 feet, so small children cannot reach it.

Away from all moving parts of the door.

7Install the entrapment WARNING label next to the wall button or console. Install the emergency release tag on, or next to, the emergency release

8The operator must reverse when the door contacts a 1-1/2 inch high object on the floor at the center of the doorway. This is about the size of a 2" x 4" board laid flat.

SAFETY FEATURES

Safe-T-Beam® (STB) Non-Contact Reversing System

Places an invisible beam across door opening, that reverses the door during down travel to the fully open position if anything passes through beam.

Safe-T-Reverse® Contact Reversing System

Automatically stops and reverses a closing door within 2 seconds of contact with an object.

Safe-T-Stop® Timed Reversed System

Automatically opens a closing door, if door does not close within 30 seconds.

Force Guard® Control

Used to set the force required for opening and closing door. For maximum safety, set the minimum force required to fully open and close door.

Automatic Lighting System

Light bulb up to 100 Watts max. , used for safer entries and exits. The light turns on when door is activated and auto- matically turns off 5 minutes later.

Manual Emergency Release

Allows the garage door to be opened or closed manually for emergencies or maintenance.

3

For Help, call 1-800-35-GENIE or visit www.geniecompany.com

3

Image 3
Contents AC Powered Belt Drive Ever be required With this manual for future reference should serviceForce Guard Control Safe-T-Beam STB Non-Contact Reversing SystemSafe-T-Reverse Contact Reversing System Safe-T-Stop Timed Reversed SystemThickness PRE-INSTALLATION ChecklistCheck Check Garage Door Check following items before assembling OpenerSectional Door Check Check Power HeadCheck Check Door Header Area Mounting AreaCheck Emove Xisting Arage Door Locks Permanent wiring must be installed by a LicensedCheck Check SAFE-T-BEAM Check Recommended ToolsAligning the SAFETY-T-BEAMS Maintenance and AdjustmentsPlace AN Object BEAM’S Path Programming Remote ControlsProgram each additional Remote using step a above Block the Beam While the Bullet Is Moving DownSnap the back of the transmitter on FlashlightErasing all remotes Figure Program receiver again as neededProgramming your car’s HomeLink system Adjusting the Open and Close LimitsAdjust the open limit a Remote does not have adequate rangeLimits Adjusting the Open and CloseAdjusting and Testing the Force Controls Adjust the close limit BWithout reversing Adjusting and Testing the ForceTest the Safety Reverse ControlsDisengaging the Door from the Opener Periodic Maintenance ScheduleTrouble TroubleshootingOpener Opener does not OperateDoes from the Remote With the Wall ControlPower Head System Status Problem Cause RemedyParts Identification

2040L, 3563435770 specifications

The Genie 3563435770,2040L is a versatile, high-performance lift designed to meet the ever-evolving needs of construction, maintenance, and industrial applications. Engineered for efficiency and safety, this model stands out for its impressive specifications and innovative technologies.

One of the key features of the Genie 3563435770,2040L is its robust lifting capability. With a maximum working height of 40 feet, the lift allows operators to reach elevated workspaces with ease. The platform capacity is designed to support multiple workers and their tools, ensuring that tasks can be completed efficiently without compromising safety.

The lift incorporates Genie’s advanced hydraulic system, which provides smooth and responsive elevation. This enhances productivity on the job site while minimizing downtime. The system is also designed for energy efficiency, reducing the overall operational costs associated with lifting tasks.

In terms of mobility, the Genie 3563435770,2040L is equipped with all-terrain tires and a compact design, allowing it to navigate difficult terrains and fit into tight spaces. Operators can easily maneuver the lift on job sites, making it ideal for both indoor and outdoor applications. Additionally, the lift features a 360-degree rotating turntable, providing enhanced flexibility and reaching angles that are often challenging with traditional lifts.

Safety is paramount in the design of the Genie 3563435770,2040L. The model is equipped with numerous safety features, including automatic braking systems, anti-slip surfaces on the platform, and guardrails to ensure secure operation at heights. Emergency descent systems are also integrated, providing peace of mind for operators in case of malfunction.

The Genie 3563435770,2040L incorporates smart technology, such as an onboard diagnostics system that allows operators to monitor performance and conduct maintenance checks easily. This predictive maintenance capability minimizes downtime and prolongs the lifecycle of the equipment.

Furthermore, the lift's user-friendly controls make it accessible for operators of all experience levels. Training programs and operator manuals are readily available to facilitate smooth and safe operation.

In conclusion, the Genie 3563435770,2040L is an exceptional lift that combines power, efficiency, and safety. Its cutting-edge technologies and practical features make it a reliable solution for a wide range of lifting needs in various sectors.