Locating & Making Connections

Wire Tie

Electrical Tape

4. Use electrical tape to wrap, be sure to cover about 2 inches on either side of connection. Secure with wire ties as shown.

Wire Tie

Use this method ONLY when connecting two separate wires end to end.

Please see the wiring chart on our website, www.bulldogsecurity.com. CONSTANT POWER (+12V, key in any position including off)

These wire(s) are in your vehicle’s main ignition harness, usually located on the steering column coming from the ignition switch. Probe each wire with your test light. The correct wire(s) will show +12V when the ignition switch is in these 5 positions (ACC-LOCK-OFF-RUN-CRANK).

1.If your vehicle has only (1) constant power wire, attach the RED wire from the 11-pin harness and both large RED wires from the 4-relay harness to the constant power wire in the vehicle.

2.If your vehicle has (2) constant power wires, attach the RED wire from the 11-pin harness and (1) large RED wire from the 4-relay harness to one of these constant power wires. Then connect the other large RED wire from the 4-relay harness to the second constant power wire in the vehicle.

IGNITION HARNESS

UNDER DASH

IGNITION WIRE(S) (+12V in run and crank position only)

The ignition wire(s) are also located in the main harness coming from the ignition switch. Probe each wire with your test light, the correct wire(s) will show +12V only when the ignition switch is in the RUN AND CRANK positions. The correct wires will not show +12V when in the OFF or ACCESSORY position.

Most Ford, GM, and Chrysler vehicles 1994 and up have at least (2) ignition wires. Most foreign vehicles have only (1).

1.Strip back the YELLOW WITH BLACK STRIPE wire from the 11-pin harness and then strip back the WHITE wire from the 4-relay harness and twist both of these wires together.

2.Connect the YELLOW WITH BLACK STRIPE wire and the WHITE wire from step (1) to the ignition wire in the main harness.

3.If your vehicle has (2) ignition wires, connect the second WHITE wire from the 4-relay harness to it.

4.If your vehicle has (3) ignition wires (some GMs) connect the second WHITE wire from the 4-relay harnessto both the second and third ignition wires in the vehicle.

ACCESSORY WIRE(S) THAT POWER THE HEATER/BLOWER MOTOR

(+12V in run or on positions) This wire is also in the main ignition switch harness usually located in the steering column. Make all connections as close to the ignition switch harness as possible.

Most vehicles will have (1) accessory wire; however some Fords, newer GM vehicles and Chrysler 94 and up will have (2) or more accessory wires. To locate these wire(s) probe for wire(s) that only show +12V when the ignition switch is in the RUN or ON positions. This wire(s) will not show +12V when the ignition switch is in any other position.

1.If your vehicle has only (1) accessory wire connect the WHITE WITH BLACK STRIPE wire from the 4-relay harness to this wire.

2.If your vehicle has (2) accessory wires, connect the WHITE WITH BLACK STRIPE wire to both.

3.If your vehicle has (3) accessory wires connect the unused WHITE wire from the 4-relay harness to the third accessory wire.

STARTER/CRANK WIRE (+12V only in the start position)

The starter/crank wire is also in the main harness. Locate the wire that shows +12V on your test light only in the cranking position. This wire will not show +12V in any other position. Attach the YELLOW WITH BLACK STRIPE wire from the 4-relay harness to this wire.

RS82 specifications

The Bulldog Security RS82 represents a cutting-edge advancement in vehicle security systems, tailored to provide top-tier protection for vehicles of various sizes. As theft and vandalism become more sophisticated, the RS82 offers a robust solution designed to keep your vehicle secure while offering convenience and user-friendly features.

One of the standout characteristics of the Bulldog Security RS82 is its powerful immobilizer function. This feature works by disabling critical engine components, rendering the vehicle almost impossible to start without the authorized key or remote. Such technology is especially crucial in today's landscape where opportunistic thefts are rampant.

Another notable attribute of the RS82 is its comprehensive alarm system. The alarm includes a loud siren, which effectively deters potential thieves, while also alerting nearby individuals to any unauthorized attempts to access the vehicle. The alarm system is equipped with a range of sensors, including shock sensors that detect vibrations and movements, ensuring that any disturbance triggers an immediate response.

Additionally, the RS82 supports remote control functionality. Users can lock or unlock their vehicle, activate or deactivate the alarm, and even locate their vehicle via GPS all through a compact remote device. This level of control adds convenience, allowing users to manage their vehicle's security from a distance.

In terms of installation, the Bulldog Security RS82 is designed for versatility. Its universal fit allows it to be installed on a variety of vehicle types, including cars, vans, and motorcycles. The system is also engineered for ease of integration, making it suitable for both professional installations and DIY enthusiasts.

Furthermore, the RS82 is built to withstand harsh weather conditions. With a durable casing that protects the internal components from moisture and debris, this security system is reliable regardless of environmental challenges.

In summary, the Bulldog Security RS82 is an exceptional vehicle security solution that combines cutting-edge technologies, including a powerful immobilizer, an effective alarm system, and convenient remote control features. Its robust design and universal fit make it an ideal choice for any vehicle owner looking to enhance security and protect their investment. With the RS82, users can enjoy peace of mind knowing their vehicle is safeguarded against theft and unauthorized access.