Harman-Kardon AVR 355, AVR 255 owner manual Rear Panel Connections

Page 10

Rear Panel Connections

￿Surround Back/Multiroom Speaker Outputs: These speaker terminals are normally used to power the surround back left/surround back right speakers in a 7.1 channel system. However,they may also be used to power the speakers in a second zone, which will receive the output selected for a multiroom system.

To change the output fed to these terminals from the default of the Surround Back speakers to the Multiroom Output, you must change a setting in the MULTIROOM MENU of the OSD system. See page 35 for more information on configuring this speaker output. In normal surround system use, the brown and black termi- nals are the surround back left channel positive

(+) and negative (–) connections and the tan and black terminals are the surround back right positive (+) and negative (–) terminals.

For multiroom use, connect the brown and black SBL terminals to the red and black connections on the left remote zone speaker and connect the tan and black SBR terminals to the red and black terminals on the right remote zone speaker.

￿Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

￿Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a TV or other video source.

￿Optical Digital Inputs: Connect the optical digital output from a DVD player,HDTV receiver, the output of a compatible computer sound card playing MP3 files or streams, LD player,MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal, a 2 channel MPEG 1 signal, or a standard PCM digital source.

￿Analog 4 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a TV or other audio or video source.

￿Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source.

￿Remote Input and Output: If the AVR’s front-panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sen- sor may be used. Connect the output of the sensor to the Remote IN jack.

The Output connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Zone 2 IR Input: Connect the outputof an IR sensor in a remote room to this jack to operate the AVR’s multiroom controlsystem.

!Preamp Outputs: Connect these jacks to an optional, external power amplifier for appli- cations where higher power is desired.

#HDMI Output: Connect this jack to the HDMI input on a compatible HDMI-equipped video display.

"Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on any video source.

$Analog 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

%HDMI Inputs: Connect the HDMI output of video sources such as a DVD player,set-top box or HDTV tuner to either of these jacks.

&Zone 2 Outputs (AVR 355 only): Connect these jacks to an optional audio power amplifier to listen to the source selected by the multiroom system in a remote room.

'A-BUS Connector: Connect this jack to an optional A-BUS-certified remote room keypad or amplifier to extend the multiroom capabilities of your AVR. See page 18 for more information on A-BUS.

(Remote IR Carrier Output (AVR 355 only): The output of this jack is the full signal received at the Remote Sensor Window Ó or input through the Remote IR Input ￿ including the carrier frequency that is removed from signals at the Remote IR Output ￿. Use this output to extend IR remote signals to the input of compatible products by direct connec- tion or through the use of optional, external IR “blasters”. If you are in doubt as to which of the two IR Output jacks to use, we recommend that you consult with your dealer or installer,or check with the manufacturer of the external equipment you wish to control.

)Video 3 Component Video Inputs (AVR 355 only): These inputs may be used with any source device equipped with analog Y/Pr/Pb or RGB component video outputs. Do not use these inputs if HDMI connection is possible, use the HDMI inputs instead.

*A-BUS IR Out (AVR 355 only): This output sends out the remote signal received by an A- Bus unit. This makes it possible to connect other Harman Kardon products to the AVR via their "IR IN" jacks, controlling them from another room with an A-Bus unit.

+Main Power Switch: Press this button ON to apply power to the AVR. When the switch is ON, the unit is placed in a Standby mode, as indicated by the amber LED 3. This button MUST be ON to operate the unit. To turn the unit off completely and prevent the use of the remote control, this switch should be pressed OFF.

NOTE: This switch is normally left in the “ON” position.

With the AVR’s powerful processor,you may connect up to three HDMI-equipped source devices to the HDMI inputs using a single-cable connection, while benefiting from superior digital audio and video performance. However,if your video display is not HDMI-compatible, you will need to connect the source device to one of the other source inputs, selecting a coaxial or optical digital audio input and analog video input. See the Connections and Installation sections for more information.

If your video display has an HDMI input, but some of your sources have only analog video outputs, you may still rely on just the HDMI video connection to your display; the AVR will automatically transcode analog video signals to the HDMI format.

NOTE ON VIDEO CONNECTIONS: When con- necting a video source product such as a VCR, DVD player,satellite receiver,cable set-top box, personal video recorder or video game to the AVR 255/AVR 355, you may use either a com- posite or S-video connection, but not both.

10REAR PANEL CONNECTIONS

Page 9 Page 11
Image 10
Page 9 Page 11
Contents AVR 255/AVR 355 Audio/VideoReceiver Table of Contents Description and Features IntroductionFront panel analog A/V inputs Safety InformationImportant Safety Instructions Main Remote with Internal CodesExclamation point within an CleaningUnpacking Do not place the unit directly on a carpeted surfaceFront Panel Controls See page 33 for more information on the Channel Indicators Rear Panel Connections Rear Panel Connections Rear Panel Connections Main Remote Control Functions OFF Zone 2 Remote Control Functions Zone 2 Remote Control Functions Hdmi Connections Installation and ConnectionsAudio Equipment Connections Hdmi Input ConnectionsAnalog and Digital Input Connections With the AVR 355 turned off, connectVideo Equipment Connections On the AVRBUS Installation Connections AVR 355 only System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnAudio Effects Select this line to display Set Up SourcesAudio and Video Input Selection See the Advanced Functions section for more informationSpeaker Setup You are now ready to begin enjoying your new receiverSystem Configuration Step One Determine Speaker Crossover Manual SetupStep Three Manual Setup Menu Step Two Measure Speaker DistancesSub Mode Number of SpeakersAdjust Speaker Distance Menu Step Four Setting Channel Output Levels ManuallySystem Configuration Surround Mode Chart OperationMain speakers and a subwoofer ReferenceWide Dolby HeadphoneAudio Effects Basic OperationMute Function Video ModesHDMI-equipped multichannel disc player Controls and Use of HeadphonesSurround Mode Selection Channel/8-Channel Direct InputDigital Audio Signals Virtual Surround Dolby Virtual Speaker Reference Dolby Surround SettingsSurround Modes Video Game Logic 7 GameNight Mode Using AVR 355 onlyMemory Backup Tape RecordingMultiroom Operation InstallationMultiroom Setup MultiroomMultiroom Operation Use the M/N Buttons to change each setting’s value Video AdjustmentsVideo Adjustments Return to main Video Modes Menu by pressing Back/ExitGeneral AVR Settings Advanced FeaturesSystem Settings Audio EffectsDefault Surround Mode Advanced FeaturesMenu Appearance To select the built-in tuner RDS TuningTuner Operation RDS OperationProgram Type PTY as shown in the list below Program Search PTYCode Readout Programming the RemoteProgramming the Remote with Codes Direct Code EntryLearning Codes from a Remote AVR 355 Remote only Erasing Learned CodesVID1/VCR VID3/TV VID2/CBL/SAT Press the 7 button k three timesProgrammed Device Functions Activity Programming MacrosErasing Activity Buttons Remote With Other Devices Resetting the Remote MemoryPunch-Through Programming Select the type of punch-through program- mingFunction List AVR Input SEL AUXAUX Reverse PlayN Next/Step Power Switch 1 is pushed Troubleshooting GuideProcessor Reset Press the AVR SelectorTechnical Specifications Logic 7 Movie DVD Audio/Video, SacdComposite Front Table A3 Speaker/Channel Setting Defaults Table A5 Source Settings Table A9 Remote Control Codes Table A11 Zone 2 Settings Appendix Settings Worksheet Part No. CQX1A1318Z

AVR 255, AVR 355 specifications

The Harman-Kardon AVR 355 and AVR 255 are two standout receivers in the realm of home audio, each delivering exceptional sound quality and a variety of features designed to enhance the listening experience.

The AVR 355 is particularly known for its impressive power output, driving up to 100 watts per channel. It boasts a 7.1-channel configuration, providing an immersive surround sound experience ideal for home theater setups. One of its hallmark technologies is the Dolby TrueHD and DTS-HD Master Audio, which ensure that high-definition audio tracks are reproduced with stunning clarity and depth. Beyond just surround sound, the AVR 355 also supports HDMI connectivity with multiple inputs, allowing for easy integration of high-definition video sources like Blu-ray players and gaming consoles.

On the other hand, the AVR 255, while slightly more compact, does not fall short of performance. It delivers a robust 7.1-channel output with 80 watts per channel, making it a great option for users looking to elevate their audio experience without overwhelming their space. The AVR 255 also incorporates advanced audio processing technologies, such as Harman’s proprietary Logic 7 technology, which converts stereo audio into a multi-channel experience. This feature is particularly beneficial for users who enjoy music in stereo and wish to enjoy it in a surround setup.

Both models feature extensive connectivity options, including Bluetooth and USB ports, enabling users to stream audio from a variety of devices seamlessly. Additionally, they are equipped with multi-room audio capabilities, allowing users to enjoy different audio sources in different rooms simultaneously.

Another notable characteristic of both receivers is their intuitive user interface. They come with on-screen displays which make navigating through settings and configurations straightforward, even for those new to home audio systems. Furthermore, they offer automatic calibration technology, which optimally adjusts the audio settings according to the unique acoustics of your room.

In summary, the Harman-Kardon AVR 355 and AVR 255 are exceptional choices for anyone looking to enhance their audio experience at home. With their powerful amplifiers, advanced audio technologies, and comprehensive connectivity options, these models ensure high-quality sound whether it’s for movies, music, or gaming. Whether you opt for the more powerful AVR 355 or the versatile AVR 255, you are guaranteed a superior audio experience tailored to your needs.
Top Page Image Contents