Harman-Kardon Harman Kardon AVR 255 and AVR 355 Detailed Technical Specifications

Page 51

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

AVR 255: 65 Watts per channel, 20Hz - 20 kHz

AVR 355: 70 Watts per channel, 20Hz - 20 kHz

@ < 0.07% THD, both channels driven into 8 ohms

7 Channel Surround Modes

Power Per Individual Channel, with all channels driven

Front L&R channels:

AVR 255: 50 Watts per channel

AVR 355: 65 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel: AVR 255: 50 Watts AVR 355: 65 Watts

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, Back) channels: AVR 255: 50 Watts per channel AVR 355: 65 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz–130kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/68dB (DIN)

Distortion

Mono/Stereo: 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

522–1620kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±10kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (-3dB)

Video Frequency

 

Response (Component)

10Hz–100MHz (-3dB)

General

 

Power Requirement

AC 220–240V/ 50Hz

Power Consumption

AVR 255: Standby < 1W,

 

540W maximum

 

AVR 355: Standby < 3W,

 

890W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

382mm

Weight net

AVR 255: 14,0 kg

 

AVR 355: 14,4 kg

ENGLISH

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon, The Bridge and Logic 7 are registered trademarks of Harman International Industries, Incorporated.

is a trademark of Harman International Industries, Inc.

*Manufactured under license from Dolby Laboratories.

"Dolby True HD", "Dolby Digital Plus", “Dolby,” “Pro Logic” and the Double-D symbol are trademarks of Dolby Laboratories.

"DTS-HD Master Audio", "DTS-HD", "DTS","DTS ES","Neo:6"and"96/24" are trademarks of DTS,Inc.

SA-CD is a trademark of Sony Electronics, Inc.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

Apple and iPod are registered trademarks of Apple Computer,Inc.

Cirrus is a registered trademark of Cirrus Logic Corp.

**Without input anti slewing and output isolation networks.

A-BUS and A-BUS/READY®Ready are registered trademarks of Leisure Tech Electronics Pty Ltd Australia.

Faroudja and DCDi by Faroudja are trademarks of Genesis Microchip, Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

TECHNICAL SPECIFICATIONS 51

Image 51
Contents AVR 255/AVR 355 Audio/VideoReceiver Table of Contents Introduction Description and FeaturesMain Remote with Internal Codes Safety InformationImportant Safety Instructions Front panel analog A/V inputsDo not place the unit directly on a carpeted surface CleaningUnpacking Exclamation point within anFront Panel Controls See page 33 for more information on the Channel Indicators Rear Panel Connections Rear Panel Connections Rear Panel Connections Main Remote Control Functions OFF Zone 2 Remote Control Functions Zone 2 Remote Control Functions Hdmi Input Connections Installation and ConnectionsAudio Equipment Connections Hdmi ConnectionsWith the AVR 355 turned off, connect Analog and Digital Input ConnectionsOn the AVR Video Equipment ConnectionsAC Power Connections System and Power ConnectionsMain Room Remote Control Extension BUS Installation Connections AVR 355 onlySpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupSee the Advanced Functions section for more information Set Up SourcesAudio and Video Input Selection Audio Effects Select this line to displayYou are now ready to begin enjoying your new receiver Speaker SetupSystem Configuration Step Two Measure Speaker Distances Manual SetupStep Three Manual Setup Menu Step One Determine Speaker CrossoverNumber of Speakers Sub ModeStep Four Setting Channel Output Levels Manually Adjust Speaker Distance MenuSystem Configuration Operation Surround Mode ChartDolby Headphone ReferenceWide Main speakers and a subwooferVideo Modes Basic OperationMute Function Audio EffectsChannel/8-Channel Direct Input Controls and Use of HeadphonesSurround Mode Selection HDMI-equipped multichannel disc playerDigital Audio Signals Video Game Logic 7 Game Dolby Surround SettingsSurround Modes Virtual Surround Dolby Virtual Speaker ReferenceTape Recording Using AVR 355 onlyMemory Backup Night ModeMultiroom InstallationMultiroom Setup Multiroom OperationMultiroom Operation Return to main Video Modes Menu by pressing Back/Exit Video AdjustmentsVideo Adjustments Use the M/N Buttons to change each setting’s valueAudio Effects Advanced FeaturesSystem Settings General AVR SettingsAdvanced Features Default Surround ModeMenu Appearance RDS Operation RDS TuningTuner Operation To select the built-in tunerProgram Search PTY Program Type PTY as shown in the list belowDirect Code Entry Programming the RemoteProgramming the Remote with Codes Code ReadoutPress the 7 button k three times Erasing Learned CodesVID1/VCR VID3/TV VID2/CBL/SAT Learning Codes from a Remote AVR 355 Remote onlyActivity Programming Macros Programmed Device FunctionsErasing Activity Buttons Select the type of punch-through program- ming Resetting the Remote MemoryPunch-Through Programming Remote With Other DevicesInput SEL AUX Function List AVRAUX Reverse PlayN Next/Step Press the AVR Selector Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications DVD Audio/Video, Sacd Logic 7 MovieComposite Front Table A3 Speaker/Channel Setting Defaults Table A5 Source Settings Table A9 Remote Control Codes Table A11 Zone 2 Settings Appendix Settings Worksheet Part No. CQX1A1318Z

AVR 255, AVR 355 specifications

The Harman-Kardon AVR 355 and AVR 255 are two standout receivers in the realm of home audio, each delivering exceptional sound quality and a variety of features designed to enhance the listening experience.

The AVR 355 is particularly known for its impressive power output, driving up to 100 watts per channel. It boasts a 7.1-channel configuration, providing an immersive surround sound experience ideal for home theater setups. One of its hallmark technologies is the Dolby TrueHD and DTS-HD Master Audio, which ensure that high-definition audio tracks are reproduced with stunning clarity and depth. Beyond just surround sound, the AVR 355 also supports HDMI connectivity with multiple inputs, allowing for easy integration of high-definition video sources like Blu-ray players and gaming consoles.

On the other hand, the AVR 255, while slightly more compact, does not fall short of performance. It delivers a robust 7.1-channel output with 80 watts per channel, making it a great option for users looking to elevate their audio experience without overwhelming their space. The AVR 255 also incorporates advanced audio processing technologies, such as Harman’s proprietary Logic 7 technology, which converts stereo audio into a multi-channel experience. This feature is particularly beneficial for users who enjoy music in stereo and wish to enjoy it in a surround setup.

Both models feature extensive connectivity options, including Bluetooth and USB ports, enabling users to stream audio from a variety of devices seamlessly. Additionally, they are equipped with multi-room audio capabilities, allowing users to enjoy different audio sources in different rooms simultaneously.

Another notable characteristic of both receivers is their intuitive user interface. They come with on-screen displays which make navigating through settings and configurations straightforward, even for those new to home audio systems. Furthermore, they offer automatic calibration technology, which optimally adjusts the audio settings according to the unique acoustics of your room.

In summary, the Harman-Kardon AVR 355 and AVR 255 are exceptional choices for anyone looking to enhance their audio experience at home. With their powerful amplifiers, advanced audio technologies, and comprehensive connectivity options, these models ensure high-quality sound whether it’s for movies, music, or gaming. Whether you opt for the more powerful AVR 355 or the versatile AVR 255, you are guaranteed a superior audio experience tailored to your needs.