Harman-Kardon AVR 255, AVR 355 owner manual Video Equipment Connections, On the AVR

Page 17

Installation and Connections

9.Connections to a subwoofer are normally made via a line level audio connection from the Subwoofer Output ￿ to the line-level input of a subwoofer with a built-in amplifier.When a passive subwoofer is used, the connection first goes to a power amplifier,which will be con- nected to one or more subwoofer speakers. If you are using a powered subwoofer that does not have line-level input connections, follow the instructions furnished with the speaker for con- nection information.

10.If an external multi-channel audio source with 5.1 outputs such as an external digital processor/decoder,DVD-Audio, SACD, Blu-ray or HD-DVD player is used, connect the outputs of that device to the 8-Channel Direct Inputs ￿, or,more easy, use the HDMI connection between such a device and the AVR,or both.

Video Equipment Connections

Video equipment is connected in the same manner as audio components.Again, the use of high-quality interconnect cables is recommended to preserve signal quality.To ensure best video performance S-Video sources should be connected to the AVR only with their S-Video In/Outputs, not with their composite video connectors too.

If you have already connected a source device to one of the HDMI inputs as explained in the Audio Equipment section, then you have auto- matically made a video connection at the same time, as the HDMI signal includes both digital audio and video components.

If your video display or source device is not HDMI-capable, you will need to use one of the analog video connections (composite, S- or com- ponent video), if available, as described below.

If the source device is not capable of transmit- ting its digital audio signal through the HDMI connection, then use one of the coaxial or optical digital audio inputs for the source.

If a multichannel analog audio connection is required for certain lossless formats (e.g. DVD- Audio, SACD, HD-DVD or Blu-ray Disc), you may make both connections. To listen to the multi- channel disc, first select the HDMI source input, then select the 6-/8-channel analog audio inputs, and the AVR will retain the last video source you selected.

1.Connect a VCR’s audio and video Play/Out jacks to the Video 2 and Analog 4 In jacks

￿￿on the rear panel. The Audio and Video Record/In jacks on the VCR should be connected to the Video 2 and Analog 4 Out jacks

￿￿ on the AVR.

2.Connect the digital audio outputs of a CD, MD or DVD player,satellite receiver,cable box or HDTV converter to the appropriate Optical or Coaxial Digital Inputs ￿￿&*.

NOTE: When connecting a device such as a digi- tal cable box or other set-top tuner product with a digital audio output, we recommend that you connect both the digital and analog outputs of the product to your AVR. The audio input polling feature of the AVR will then be able to make cer- tain that you have a constant audio feed, since it will automatically switch the audio input to the analog jacks if the digital feed is interrupted or not available for a particular channel.

3.Connect the Composite and S-Video (if S- Video device is in use) Monitor Output ￿ jacks on the receiver to the composite and S- Video input of your television monitor or video projector.

4.If your DVD player and monitor both have component video connections, connect the com- ponent outputs of the DVD player to the Video

1Component Video Inputs ￿. Note that even when component video connections are used the audio connections must still be made to either one of the analog audio inputs or any of the Optical or Coaxial Digital Input jacks

￿￿.

5.If another component video device is avail- able, connect it to the Video 2 or Video 3 Component Video Input jacks ,). The audio connections for this device should be made to either one of the audio input jacks or any of the Optical or Coaxial Digital Input jacks ￿￿.

6.If the component video inputs are used, connect the Component Video Output ￿ to the component video inputs of your TV,projector or display device.

7.If you have a camcorder,video game or other audio/video device that is connected to the AVR on a temporary, rather than permanent basis, connect the audio, video and digital audio out- puts of that device to the Front Panel Inputs &*(.

ENGLISH

INSTALLATION AND CONNECTIONS 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR 255/AVR 355 Audio/VideoReceiver Table of Contents Introduction Description and FeaturesImportant Safety Instructions Safety InformationFront panel analog A/V inputs Main Remote with Internal CodesUnpacking CleaningExclamation point within an Do not place the unit directly on a carpeted surfaceFront Panel Controls See page 33 for more information on the Channel Indicators Rear Panel Connections Rear Panel Connections Rear Panel Connections Main Remote Control Functions OFF Zone 2 Remote Control Functions Zone 2 Remote Control Functions Audio Equipment Connections Installation and ConnectionsHdmi Connections Hdmi Input ConnectionsWith the AVR 355 turned off, connect Analog and Digital Input ConnectionsOn the AVR Video Equipment ConnectionsMain Room Remote Control Extension System and Power ConnectionsBUS Installation Connections AVR 355 only AC Power ConnectionsSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnAudio and Video Input Selection Set Up SourcesAudio Effects Select this line to display See the Advanced Functions section for more informationYou are now ready to begin enjoying your new receiver Speaker SetupSystem Configuration Step Three Manual Setup Menu Manual SetupStep One Determine Speaker Crossover Step Two Measure Speaker DistancesNumber of Speakers Sub ModeStep Four Setting Channel Output Levels Manually Adjust Speaker Distance MenuSystem Configuration Operation Surround Mode ChartWide ReferenceMain speakers and a subwoofer Dolby HeadphoneMute Function Basic OperationAudio Effects Video ModesSurround Mode Selection Controls and Use of HeadphonesHDMI-equipped multichannel disc player Channel/8-Channel Direct InputDigital Audio Signals Surround Modes Dolby Surround SettingsVirtual Surround Dolby Virtual Speaker Reference Video Game Logic 7 GameMemory Backup Using AVR 355 onlyNight Mode Tape RecordingMultiroom Setup InstallationMultiroom Operation MultiroomMultiroom Operation Video Adjustments Video AdjustmentsUse the M/N Buttons to change each setting’s value Return to main Video Modes Menu by pressing Back/ExitSystem Settings Advanced FeaturesGeneral AVR Settings Audio EffectsMenu Appearance Advanced FeaturesDefault Surround Mode Tuner Operation RDS TuningTo select the built-in tuner RDS OperationProgram Search PTY Program Type PTY as shown in the list belowProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryVID1/VCR VID3/TV VID2/CBL/SAT Erasing Learned CodesLearning Codes from a Remote AVR 355 Remote only Press the 7 button k three timesErasing Activity Buttons Activity Programming MacrosProgrammed Device Functions Punch-Through Programming Resetting the Remote MemoryRemote With Other Devices Select the type of punch-through program- mingInput SEL AUX Function List AVRAUX Reverse PlayN Next/Step Processor Reset Troubleshooting GuidePower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Composite Front DVD Audio/Video, SacdLogic 7 Movie Table A3 Speaker/Channel Setting Defaults Table A5 Source Settings Table A9 Remote Control Codes Table A11 Zone 2 Settings Appendix Settings Worksheet Part No. CQX1A1318Z

AVR 255, AVR 355 specifications

The Harman-Kardon AVR 355 and AVR 255 are two standout receivers in the realm of home audio, each delivering exceptional sound quality and a variety of features designed to enhance the listening experience.

The AVR 355 is particularly known for its impressive power output, driving up to 100 watts per channel. It boasts a 7.1-channel configuration, providing an immersive surround sound experience ideal for home theater setups. One of its hallmark technologies is the Dolby TrueHD and DTS-HD Master Audio, which ensure that high-definition audio tracks are reproduced with stunning clarity and depth. Beyond just surround sound, the AVR 355 also supports HDMI connectivity with multiple inputs, allowing for easy integration of high-definition video sources like Blu-ray players and gaming consoles.

On the other hand, the AVR 255, while slightly more compact, does not fall short of performance. It delivers a robust 7.1-channel output with 80 watts per channel, making it a great option for users looking to elevate their audio experience without overwhelming their space. The AVR 255 also incorporates advanced audio processing technologies, such as Harman’s proprietary Logic 7 technology, which converts stereo audio into a multi-channel experience. This feature is particularly beneficial for users who enjoy music in stereo and wish to enjoy it in a surround setup.

Both models feature extensive connectivity options, including Bluetooth and USB ports, enabling users to stream audio from a variety of devices seamlessly. Additionally, they are equipped with multi-room audio capabilities, allowing users to enjoy different audio sources in different rooms simultaneously.

Another notable characteristic of both receivers is their intuitive user interface. They come with on-screen displays which make navigating through settings and configurations straightforward, even for those new to home audio systems. Furthermore, they offer automatic calibration technology, which optimally adjusts the audio settings according to the unique acoustics of your room.

In summary, the Harman-Kardon AVR 355 and AVR 255 are exceptional choices for anyone looking to enhance their audio experience at home. With their powerful amplifiers, advanced audio technologies, and comprehensive connectivity options, these models ensure high-quality sound whether it’s for movies, music, or gaming. Whether you opt for the more powerful AVR 355 or the versatile AVR 255, you are guaranteed a superior audio experience tailored to your needs.
Top Page Image Contents