Geemarc P-AMP40 manual REAR Output socket connection, Description

Page 5

REAR

DESCRIPTION

REAR

(*)Output socket connection (2)

(*)Classiﬁed TNV-3 according to EN60950 standard.

5

Image 5

Contents Page CONTENTS DESCRIPTION TOP Tone control Volume control Boost switchbutton Battery LED Output socket connection DESCRIPTION BOTTOM Battery compartment Wall mount holesDESCRIPTION REAR Output socket connection2 - HOW TO CONNECT THE P-Amp40TO THE PHONE INSTALLATION1 - HOW TO SET THE BATTERY 3.To test that the microphone is connected correctly, blow lightly into the mouthpiece. If you hear the ‘blowing sound’ in the earpiece, your P-Amp40is now set. If you cannot hear the ‘blowing sound’, repeat 2 and 3 until both the earpiece and microphone are working correctly INSTALLATION3 - VOLUME CONTROL SETTING5 - BOOST SWITCH 6 - BATTERY INDICATORIF THE AMPLIFIER DOES NOT WORK TROUBLESHOOTING1050 East Maple Rd Troy, MI GUARANTEE