Graco 256200 important safety instructions Toxic Fluid or Fumes Hazard

Page 3

Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equip- ment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.

WARNING

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

Always wear impervious gloves when spraying or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, includ- ing eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric

lamps, and plastic drop cloths (potential static arc).

• Keep work area free of debris, including solvent, rags and gasoline.

• Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail.

If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

312766N

3

Image 3
Contents Ratio Transfer Pump Contents Toxic Fluid or Fumes Hazard Equipment Misuse Hazard Moisture Sensitivity of Isocyanates Isocyanate HazardFoam Self-Ignition Keep Components a and B SeparateChanging Materials Typical Installation without Circulation Typical InstallationTypical Installation with Circulation Typical Installation with CirculationTypical Installation for Lubrication Applications Typical Installation for Lubrication ApplicationsSystem Accessories InstallationSetup Grounding Pressure Relief Procedure OperationFlush Pump Before Use Daily Shutdown Daily StartupAir Motor Disassembly RepairBefore you start Air Motor Reassembly Unscrew the piston cylinder 58 from the pump frame Pump Lower DisassemblyPush down on the pump connecting rod Series a and B Pump Lower ReassemblyTI21636a Problem Cause Solution TroubleshootingT1 21 Ratio Transfer Pump PartsPart Description Qty Grounding Clamp AccessoriesAir Regulator and Gauge Dimensions See Performance Chart on Technical DataCalculate Fluid Outlet Pressure black curves Performance ChartTechnical Data 312766N Graco Information Graco Standard Warranty