PRODUCT SPECIFICATIONS
Item
Electrical Requirements
Pump Type
Maximum Particle Size
Maximum Water Temperature
Minimum Water Level
Pump Down Range
PH Range
Overall Dimensions
Weight
Description
115 V / 60 Hz / 5.2 Start AMPs.
1/3 HP Motor / Single Phase / 1725 RPM. Continuous Run Thermal Overload Protection.
Centrifugal / Pit Type /
Discharge Size:
1/8” Diameter Solids.
140 Degrees Fahrenheit.
9” To 10”.
6 To 9.
30” L x 9” W x 33” H.
13.70 Pounds.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 92274 | For technical questions, please call | PAGE 2 |