Harbor Freight Tools 92274 manual Symbology, Figure a

Page 6

3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like that in the following illustration. (See Figure A.)

3-PRONG PLUG

115 VOLT,

GROUNDED,

ELECTRICAL OUTLET

FIGURE A

	SYMBOLOGY


	Double Insulated
	Canadian Standards
	Association
	Underwriters
	Laboratories, Inc.
V ~	Volts Alternating Current
V ~
A	Amperes
A
no	No Load Revolutions
xxxx/min.	per Minute (RPM)
FIGURE B

SKU 92274

For technical questions, please call 1-800-444-3353.

PAGE 6

Image 6

Contents HP Pedestal Sump Pump For technical questions, please callSave this Manual Product SpecificationsGeneral Safety Rules UnpackingWork Area Electrical SafetyPersonal Safety SKU For technical questions, please callTool USE and Care Service GroundingGrounded Tools Tools with Three Prong Plugs Symbology Figure aSpecific Safety Rules See Figure CSKU For technical questions, please call Assembly and Operating Instructions Figure DTroubleshooting See Figure DPump Motor does not run Pump Motor runs and discharges water, but will not shut off Circuit breaker trips or fuse blows when Sump Pump startsPump Motor Runs, but does not discharge water Pump Motor runs, but delivers small amount of waterINSPECTION, MAINTENANCE, and Cleaning Please Read the Following CarefullyParts List Description QtyAssembly Diagram

FIGURE A

SYMBOLOGY

FIGURE B

SKU 92274

For technical questions, please call 1-800-444-3353.