Installation, Initial START-UP | Aqua Flo Therma-Flo EHT specs

WARNINGS

(may cause serious injuries or death)

•The power supply must be turned off during the installation process.

•This pump is wired for 220-240 VAC, 50 Hz, and Single Phase power supply only. The power supply should be supplied through a Residual Current Device (RCD) with a rated tripping current not exceeding 30 mA.

•No part of the pump is to be located above the spa bath during use. Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into the spa bath.

•Pump and other parts containing energized or live parts, except parts supplied with safety extra low voltage not exceeding 12 V, must be INACCESSIBLE to a person in the spa bath.

•Pump must be mounted on top of a horizontal and solid surface; fixed securely using screws or bolts through the 4 mounting holes located on the base.

•The appliance is not intended for use by young children or infirm persons without supervision.

•Young children should be supervised to ensure that they do not play with the appliance.

CAUTION

(may cause property damage)

•This pump is intended for Spa Bath use ONLY, and is not suitable for any other application.

•The pump is NOT self-priming; therefore, the water fill-level of the spa bath must be equal or higher than the pumps suction port (inlet).

•DO NOT run the pump without water. This may damage pump and its components.

•DO NOT open or service the pump. There are no “user serviceable” parts or assemblies inside. This pump contains dielectric oil used to cool down the motor. The amount of oil contained herein was precisely measured for optimum performance. Opening or altering the pump will void the warranty.

•This pump is a Type Y Attachment. If the supply cord needs to be replaced, please contact your local authorized dealer.

INSTALLATION

1.Be sure that the requirements under Mounting Preparation section have been met.

2.The pump is provided with barrel unions to connect the pump’s Suction port

(inlet) and Discharge port (outlet) to the plumbing. The plumbing must be routed or oriented in a way that when the pump is installed, the port connections are not subjected to undue stress.

INITIAL START-UP

1.Fill the spa bath with water to the normal operating bath water level.

2.Open all the valves within the plumbing system.

Therma-Flo EHT specifications

Aqua Flo Therma-Flo EHT is an innovative approach to enhancing temperature control in heating systems, designed to optimize energy efficiency while providing superior comfort. The EHT system stands out for its advanced features and cutting-edge technologies that redefine heating solutions for both residential and commercial applications.

One of the primary features of the Aqua Flo Therma-Flo EHT is its unique thermodynamic design, which ensures rapid heat distribution throughout the space. This technology minimizes temperature fluctuations, maintaining a consistent and comfortable environment. The system employs adjustable flow rates, allowing users to easily customize their heating preferences according to specific needs and room sizes.

Energy efficiency is at the forefront of the Therma-Flo EHT's design. The system utilizes a variable speed pump, which intelligently adjusts its operation based on real-time demands. By optimizing energy consumption, users can significantly reduce their heating costs while minimizing their environmental impact. The integration of smart sensors further enhances efficiency by monitoring temperature and automatically adjusting the system's output.

Another notable characteristic of the Aqua Flo Therma-Flo EHT is its compatibility with renewable energy sources. This flexibility allows users to integrate solar thermal systems or heat pumps seamlessly, making it an ideal choice for eco-conscious consumers looking to reduce their carbon footprint. The combination of traditional heating methods with innovative renewable technologies places the EHT at the forefront of sustainable heating solutions.

The Therma-Flo EHT system is also designed with user comfort in mind. Its quiet operation ensures that environments remain tranquil, making it suitable for homes, offices, and other spaces where noise can be a concern. Additionally, the user-friendly interface allows for easy control and monitoring of heating settings, providing a seamless experience for users.

Durability and reliability are paramount in the construction of the Aqua Flo Therma-Flo EHT. The system is built using high-quality materials designed to withstand the rigors of long-term use, ensuring that it remains a dependable choice for heating needs.

In summary, Aqua Flo Therma-Flo EHT combines advanced technology with exceptional features to deliver efficient, comfortable, and sustainable heating solutions. Its innovative design, energy-saving capabilities, and compatibility with renewable sources make it a leading choice for those looking to enhance their heating systems.