Operation, Maintenance | Aqua Flo Therma-Flo EHT guide

CAUTION

(may cause property damage)

•DO NOT run the pump without water. If pump fails to prime within 30 seconds, turn it off. Check if there is an airlock, clogged plumbing, or closed valve.

1.Turn the power supply “ON”.

2.If the pump has an air switch, depress the air button switch to turn the pump “ON” or “OFF”.

3.Check plumbing system for leaks.

OPERATION

1.Fill the spa bath with water to the normal operating bath water level.

2.Depress the air button switch to turn the pump “ON”.

3.Depress again, to turn it “OFF”.

4.Be sure to drain the water from the spa bath after each use.

MAINTENANCE

This pump does not require periodic cleaning or maintenance to perform properly. It was designed and built to be trouble free. If, for some reason, the pump leaks or fails to perform after completing the troubleshooting procedure below, please contact your local Authorized Dealer for assistance. If it is still under warranty, we will replace it free.

AUTO BLEED ACTIVATION AND OPERATION

There is a possibility that under certain conditions, the Therma-Flo EHT front discharge pump may experience issues with air locking. In order to allow the user to easily eliminate the air lock, these pumps are equipped with an Auto Bleed Valve to release air.

Follow these steps to activate the Auto Bleed Valve:

1.Drain the pump.

2.Remove the threaded cap with seal and the ball supplied on the pump.

3.Drill a small (approximately 2 mm) hole inside the cavity through the pilot hole in the pump housing.

4.Replace the ball and cap with seal.

5.Connect one end of a small tube to the valve cap and the other end to an appropriate drain.

6.Refill the pump.

Once completed, trapped air should be automatically released during filling.

See diagram on next page.

Therma-Flo EHT specifications

Aqua Flo Therma-Flo EHT is an innovative approach to enhancing temperature control in heating systems, designed to optimize energy efficiency while providing superior comfort. The EHT system stands out for its advanced features and cutting-edge technologies that redefine heating solutions for both residential and commercial applications.

One of the primary features of the Aqua Flo Therma-Flo EHT is its unique thermodynamic design, which ensures rapid heat distribution throughout the space. This technology minimizes temperature fluctuations, maintaining a consistent and comfortable environment. The system employs adjustable flow rates, allowing users to easily customize their heating preferences according to specific needs and room sizes.

Energy efficiency is at the forefront of the Therma-Flo EHT's design. The system utilizes a variable speed pump, which intelligently adjusts its operation based on real-time demands. By optimizing energy consumption, users can significantly reduce their heating costs while minimizing their environmental impact. The integration of smart sensors further enhances efficiency by monitoring temperature and automatically adjusting the system's output.

Another notable characteristic of the Aqua Flo Therma-Flo EHT is its compatibility with renewable energy sources. This flexibility allows users to integrate solar thermal systems or heat pumps seamlessly, making it an ideal choice for eco-conscious consumers looking to reduce their carbon footprint. The combination of traditional heating methods with innovative renewable technologies places the EHT at the forefront of sustainable heating solutions.

The Therma-Flo EHT system is also designed with user comfort in mind. Its quiet operation ensures that environments remain tranquil, making it suitable for homes, offices, and other spaces where noise can be a concern. Additionally, the user-friendly interface allows for easy control and monitoring of heating settings, providing a seamless experience for users.

Durability and reliability are paramount in the construction of the Aqua Flo Therma-Flo EHT. The system is built using high-quality materials designed to withstand the rigors of long-term use, ensuring that it remains a dependable choice for heating needs.

In summary, Aqua Flo Therma-Flo EHT combines advanced technology with exceptional features to deliver efficient, comfortable, and sustainable heating solutions. Its innovative design, energy-saving capabilities, and compatibility with renewable sources make it a leading choice for those looking to enhance their heating systems.