PAGE 2 | STORAGE OF PUMPS AND CAUTION NOTES |
THESE INSTRUCTIONS APPLY TO THE PUMP ONLY. THEY ARE INTENDED TO BE GENERAL AND NOT SPECIFIC. IF YOUR OPERATING CONDITIONS EVER CHANGE, ALWAYS REFER TO THE FACTORY FOR REAPPLICATION. ALWAYS REFER TO THE MANUALS PROVIDED BY MANUFACTURERS OF THE OTHER EQUIPMENT FOR THEIR SEPARATE INSTRUCTIONS.
CAUTION
IMPORTANT SAFETY NOTICE
THE INSTALLATION, USE AND OPERATION OF THIS TYPE OF EQUIPMENT IS AFFECTED BY VARIOUS FEDERAL, STATE AND LOCAL LAWS AND THE REGULATIONS CONCERNING OSHA. COMPLIANCE WITH SUCH LAWS RELATING TO PROPER INSTALLATION AND SAFE OPERATION OF THIS TYPE OF EQUIPMENT IS THE RESPONSIBILITY OF THE EQUIPMENT OWNER AND ALL NECESSARY STEPS SHOULD BE TAKEN BY THE OWNER TO ASSURE COMPLIANCE WITH SUCH LAWS BEFORE OPERATING THE EQUIPMENT.
STORAGE OF PUMPS
IF THE EQUIPMENT IS NOT TO BE IMMEDIATELY INSTALLED AND OPERATED, STORE IT IN A CLEAN, DRY,
SPECIAL INSTRUCTIONS FOR:
1.COAT THE BEARING WITH LUBRICANT.
2.RETARD OXIDATION OR CORROSION AND,
3.PREVENT POSSIBLE FALSE BRINELLING.
CONSIDER A UNIT IN STORAGE WHEN:
1.IT HAS BEEN DELIVERED TO THE JOBSITE AND IS AWAITING INSTALLATION.
2.IT HAS BEEN INSTALLED BUT OPERATION IS DELAYED PENDING COMPLETION OF CONSTRUCTION.
3.THERE ARE LONG PERIODS (30 DAYS OR MORE) BETWEEN OPERATION CYCLES.
4.THE PLANT (OR DEPARTMENT) IS SHUT DOWN FOR PERIODS OF LONGER THAN 30 DAYS.
NOTE: | STORAGE REQUIREMENTS VARY DEPENDING ON THE LENGTH OF STORAGE, |
| THE CLIMATIC ENVIRONMENT AND THE EQUIPMENT. FOR STORAGE |
| PERIODS OF THREE MONTHS OR LONGER, CONTACT THE MANUFACTURER |
| FOR SPECIFIC INSTRUCTIONS. IMPROPER STORAGE COULD DAMAGE THE |
| EQUIPMENT WHICH WOULD RESULT IN |
| RESTORATION REQUIREMENTS OR |
| FAILURES. |