Assembling the appliance

VC720504MUK Rev1_Instruction Book 07/08/2013 16:28 Page 4

Slide the steam outlet at the base of the main body (13) onto the mating spigot of the floorhead (23) and secure with the floorhead securing screw (21) provided. A cross-head screwdriver will be required to tighten the screw.

NOTE: The floorhead securing screw is supplied in a small plastic bag taped on the inside of the internal packing sleeve.

Steam cleaning floors

IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry vacuumed. However, we recommend that the steam cleaner is not used on:

•bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).

•damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).

Also, do not keep the steam cleaner in one place for an extended period, because the continual heat may cause damage to carpets and laminate flooring.

On wood and laminate flooring, do not make the floor overly wet - always set the steam to minimum.

Please disconnect and allow the unit to cool before changing cloths and attachments.

Switching the product on

Press the collapsible handle release/restore button (5), then swing the upright handle (3) upwards until it clicks into place in an upright position.

Rotate the upper cord storage hook (4) to quickly release the power cord (18).

Secure the power cord in the cord holder (2) whilst using the cleaner.

3Connect the plug to the mains supply. Switch the product on using the on/off button (14).

The low steam level indicator light (11) will illuminate to show the product is active.