Harman-Kardon AVR 360, AVR 460 manual Multizone Operation, System Settings, General AVR Settings

Page 11

ADVANCED FUNCTIONS

Convergence and Edge Focus

The crosshatch pattern that may surround the test screen may be used to evaluate edge focus and convergence in front- or rear-projection video displays. If you are unable to improve the picture using the available controls, contact the video display manufacturer’s authorized service representative for assistance.

When you have finished making any video adjustments, press the Back/Exit Button.

Multizone Operation

With the multizone system in use, you may enjoy an exciting 5.1-channel home theater presentation in the main listening area, while others listen to the same materials or an entirely different presentation in another room.

Although installation of a multizone system is not complicated, it requires running wires inside walls. Check your local building codes and comply with the requirements for in-wall wiring systems, to prevent the possibility of a dangerous situation. If you have any questions about installing a multizone system, it is strongly recommended that you contact a professional custom installer. See Step Eight of the Installation section on page 22 in the Basic Manual for instructions on installing a multizone system.

Operating the Multizone System

The AVR 460/AVR 360’s multizone system is accessed using the on-screen Zone 2 menu. Press the Setup Button, and use the KL Buttons to navigate to the Zone 2 line. Press the OK Button to display the Zone 2 menu. See Figure 38.

Volume: The volume is controlled separately for the remote zone.

Surround Back Amps: Reassign the surround back channels to the multizone system. When this line is set to Zone 2, you may only configure the main listening room for up to 5.1 channels. The EzSet/EQ process will only configure the main system. Use the Manual Setup section of the Speaker Setup menu to configure the remote speakers with this setting at Main Room, then return this setting to Zone 2.

To operate the multizone system using the main remote, slide the Zone Select Switch at the bottom of the remote to the “2” position. To select a zone using the Zone 2 remote (AVR 460 only), press the Zone Selector, and the Zone Indicator will turn green when the remote is set to operate Zone 1, or red to operate Zone 2.

System Settings

The AVR 460/AVR 360 offers system settings for ease of use. These settings may be accessed from the System Settings menu, which is selected by pressing the Setup Button and navigating to the System line. Press the OK Button to display the System Settings menu. See Figure 39.

ENGLISH

Figure 38 – Zone 2 Menu

Status: Turns the multizone system on or off. When no one is listening in the remote room, leave this setting at the default of OFF.

Source: Indicates the source input for the remote zone. You may select a different source from the main listening area. However, if the same source has been selected for both the main listening area and the remote zone, listeners in both areas will hear the same content.

NOTE: Only analog audio sources, including The Bridge III, are available to the multizone system. To hear digital devices, such as a CD player, in the remote zone, follow these steps:

1.In addition to a digital audio connection, connect the source device’s analog audio outputs to the AVR. Make a note in Table A5 in the appendix which set of inputs was used.

2.In the Info Settings menu, leave the Audio Input From Source setting at the digital audio input. Scroll down to the Zone 2 Audio setting and select the analog audio input.

Figure 39 – Systems Settings Screen

Front-Panel Dimmer: Select On 100% for full brightness, dim to 50% or 25% of full brightness or select Off to fully darken the display. The light inside the Volume Control will go out when the display is partly or fully dimmed, but the Power Indicator will always remain lit to remind you that the AVR is powered on.

General AVR Settings

Volume Units: Select whether volume is displayed in the conventional decibel scale or on a numeric scale from 0 to 90. When the decibel scale is used, 0dB is the maximum recommended volume, with lower volumes displayed as negative values.

Volume Default and Volume Default Level: These two settings are used together to program the volume level at turn-on. Turn Volume Default on, and then set the Volume Default Level to the desired turn-on volume. When the Volume Default setting is left off, the AVR will play at the last-used volume setting from the previous listening session.

Unit of Measure: Adjusts the speaker-distance settings for Manual Speaker Setup. Select between meters and feet.

Language: Select the preferred language for the AVR’s on-screen menus

and displays: English, French, Spanish, German, Italian or Russian.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AVR 460/AVR Important Safety Information Important Safety InstructionsTable of Contents and Features Surround Modes Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundIndicates that an LFE channel is present Dolby Surround SettingsStep Two Measure Speaker Distances Manual Speaker SetupStep Three Manual Setup Menu Step One Determine Speaker CrossoverSub Mode Adjust Crossover Frequencies MenuAdjust Speaker Distance Menu Audio Effects Step Four Setting Channel Output Levels ManuallyVideo Modes Video AdjustmentsColor Adjustment How to Adjust the Custom Picture SettingsBrightness Adjustment Contrast AdjustmentOperating the Multizone System System SettingsGeneral AVR Settings Multizone OperationPunch-Through Programming Advanced Remote Control FunctionsMenu Appearance System InformationLearning AVR 460 only Resetting the RemoteTable A1 Recommended Source Component Connections Appendix Default settings, worksheets, remote product codesTable A2 Source Setting Defaults Audio Inputs Position Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults Channel Analog Your SettingsServer Radio Game Table A5 Source SettingsTable A6 Audio Effects Settings Media Default Cable/SatAuto Select Logic 7 Movie Or native digital Format Table A7 Video Modes SettingsBlack Level Off Deinterlacing Film Mode Detect Table A8 Surround ModesTable A11 Zone 2 Settings Table A9 Remote Control CodesTable A10 System Settings Table A12 Surround Modes Surround Mode Description Incoming Bitstream or SignalDTS-HD Table A12Three variants are available Logic Tuner Setting to be offDTS 2/2/.0 or .1, 3/2/.0 or Cinema Analog 2-channel PCM 32kHz, 44.1kHz or 48kHz LogicButton Name Table A13 - Remote Control Function ListTiVo DMC1000Cable/SAT Game Table A16 Remote Control Product Codes AUX-VCR Table A14 Remote Control Product Codes TVTable A15 Remote Control Product Codes AUX-HDTV Table A17 - Remote Control Product Codes AUX-CD Table A18 - Remote Control Product Codes DVDTable A24 Remote Control Product Codes AUX- TiVo Table A22 Remote Control Product Codes Media ServerGeneral FM Tuner SectionAM Tuner Section Video Section

AVR 360, AVR 460 specifications

The Harman-Kardon AVR 460 and AVR 360 are two outstanding models from the renowned audio equipment manufacturer, both designed to deliver high-quality sound experiences for home entertainment systems. These receivers combine advanced technologies with user-friendly features, making them popular choices among audiophiles and casual listeners alike.

The Harman-Kardon AVR 460 is equipped with a robust 7.1 channel surround sound system, boasting a total power output of 100 watts per channel. This receiver supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring immersive sound quality for movies and music alike. One of its standout features is the proprietary Harman Kardon Logic 7 technology, which enhances stereo sources to a multi-channel audio experience, maximizing the quality of any audio input.

On the other hand, the Harman-Kardon AVR 360 follows closely in features and audio performance, offering 7.1 channels as well but with a slightly lower power output of 80 watts per channel. It still excels in audio clarity and richness, making it suitable for any home theater setup. Both models provide extensive connectivity options, including HDMI inputs, legacy audio inputs, and built-in Bluetooth, allowing users to effortlessly stream music from their smartphones or tablets.

Another notable characteristic of the AVR 460 is its advanced video processing capabilities, enabling video upscaling to 1080p, ensuring that users can enjoy their content in the best possible resolution. Both receivers also incorporate multi-zone functionality, allowing different audio sources to be played in various rooms simultaneously. This feature makes them perfect for entertaining guests or enjoying music throughout the home.

The user interfaces for both models are designed with ease of use in mind, featuring intuitive on-screen menus and remote control functionality. They also support various audio calibration technologies, such as Harman's Room Correction, which optimizes sound output based on the specific acoustics of the listening environment.

In summary, the Harman-Kardon AVR 460 and AVR 360 are both exemplary audio/video receivers that combine advanced sound technologies, extensive connectivity options, and user-friendly features. Whether you are looking for immersive surround sound for movies or high-fidelity audio for music, these models are impressive choices that enhance any home theater setup, delivering exceptional performance for years to come.
Top Page Image Contents