Harman-Kardon AVR 360, AVR 460 manual Video Adjustments, Video Modes

Page 9

ADVANCED FUNCTIONS

Video Adjustments

The AVR 460/AVR 360 uses leading-edge Faroudja DCDi Cinema video processing technology. Incoming video may be upscaled up to 1080p (1080i with component video outputs) for outstanding video quality, even with analog video sources. The Faroudja DCDi Cinema Dual 3D comb filters and

10-bit video processing eliminate the jagged edges and moiré patterns seen with less advanced processing.

The “Torino” video processing chip generates on-screen graphics in high definition, and blends it with the incoming video, so that you can continue to watch a program while using system menus.

The video processor automatically provides the best picture based on the capabilities of your video display and the incoming source video. You may experiment with the Video Modes menu adjustments to try to improve the picture further.

Video Modes

Adjust the picture settings on your video display before adjusting the AVR. Access the picture settings from the Video Modes menu. Press the Video Modes Button, and the screen shown in Figure 35 will appear. The menu may also be accessed from the Info Settings menu.

NOTE: The settings in the Video Modes menu affect each source independently.

Figure 35 – Video Modes Menu

Video Mode: The default setting of Off passes the video signal through to the display with only basic video processing. Video scaling cannot be turned off, but selecting the HDMI Bypass mode in the Info Settings menu for a source connected to one of the HDMI Inputs passes the video signal directly from the HDMI Input to the HDMI Output, bypassing all video processing. Select one of these processing options to optimize the picture for the current program by applying adjustments to the brightness, contrast, color and sharpness:

•• Sports: For sporting events.

•• Nature: For programs shot outdoors, in a natural setting.

•• Movie: For movies and many television broadcasts.

•• Custom: Allows manual adjustment of the picture settings. The Brightness, Contrast, Color and Sharpness settings appear as sliders with values ranging from 0 to 100. The default setting for each adjustment is

50.Use the M N Buttons to change each setting’s value. Picture Adjust: Changes the aspect ratio of the displayed image.

Widescreen (16:9) images are displayed on a full-screen (4:3) device in letterbox format. Black bars may appear above and below the image.

When displaying full-screen images on a widescreen device, black or gray bars may appear to the left and right of the image (pillarboxing).

Plasma and CRT monitors may suffer from “burn-in” when the same image, such as the horizontal or vertical bars, is left on screen for a long period of time. Adjust the picture so that it fills the display’s screen. Highlight this setting and press the OK Button. Each press of the KL Buttons changes the setting. Press the OK Button when the desired setting appears.

•• Auto Fit: The AVR automatically adjusts the image, as required, to fit the display’s capabilities.

•• Height Fit: Adjusts the image to eliminate any bars above or below it. Bars may remain at the sides.

•• Width Fit: Adjusts the image to eliminate any bars on the sides. Bars may remain above and below the image.

•• Zoom 1x: Displays the image as received from the source. If the image is in the 4:3 aspect ratio, on widescreen displays pillarbox format may be used. If the image is in the 16:9 aspect ratio, on full-screen (4:3) displays letterbox format may be used.

•• Zoom 2x and Zoom 3x: Stretches the image evenly to completely fill the screen. The outer portions of the image may be cropped.

Experiment with this setting until you find a pleasing display format for each program.

Overscan: For historical reasons, there is a convention to reserve an area around the border of a video frame, called “overscan”, that may be viewed on newer high-definition displays, although it was not visible on older analog television sets. However, since not all displays are capable of showing this portion of the frame, directors avoid placing important information in that area.

If your video display is capable of displaying the overscan area, turn this setting on to avoid seeing a black border around the image which could cause unwanted “burn-in” on some plasma and CRT displays. The AVR turns this setting off by default when the source device is connected to one of the HDMI Inputs. The setting is turned on by default when the source is connected to one of the analog video inputs.

Advanced Video Settings: Press the N or OK Button to display the Advanced Video Modes submenu (see Figure 36). This submenu is not accessible when the video processor (Video Mode setting) is turned off.

Figure 36 – Advanced Video Modes Menu

Noise Reduction: Adjust this setting to Low, Medium or High to filter out signal noise, or turn it off.

ENGLISH

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR 460/AVR Important Safety Information Important Safety InstructionsTable of Contents and Features Digital Audio Signals Analog Audio SignalsAudio Processing and Surround Sound Surround ModesIndicates that an LFE channel is present Dolby Surround SettingsStep Three Manual Setup Menu Manual Speaker SetupStep One Determine Speaker Crossover Step Two Measure Speaker DistancesAdjust Crossover Frequencies Menu Adjust Speaker Distance MenuSub Mode Audio Effects Step Four Setting Channel Output Levels ManuallyVideo Modes Video AdjustmentsBrightness Adjustment How to Adjust the Custom Picture SettingsContrast Adjustment Color AdjustmentGeneral AVR Settings System SettingsMultizone Operation Operating the Multizone SystemMenu Appearance Advanced Remote Control FunctionsSystem Information Punch-Through ProgrammingLearning AVR 460 only Resetting the RemoteAppendix Default settings, worksheets, remote product codes Table A2 Source Setting DefaultsTable A1 Recommended Source Component Connections Table A4 Delay Setting Defaults Table A3 Speaker/Channel Setting DefaultsChannel Analog Your Settings Audio Inputs PositionTable A6 Audio Effects Settings Table A5 Source SettingsMedia Default Cable/Sat Server Radio GameBlack Level Off Deinterlacing Film Mode Detect Table A7 Video Modes SettingsTable A8 Surround Modes Auto Select Logic 7 Movie Or native digital FormatTable A9 Remote Control Codes Table A10 System SettingsTable A11 Zone 2 Settings Table A12 Surround Modes Surround Mode Description Incoming Bitstream or SignalDTS-HD Table A12DTS 2/2/.0 or .1, 3/2/.0 or Cinema Tuner Setting to be offAnalog 2-channel PCM 32kHz, 44.1kHz or 48kHz Logic Three variants are available LogicButton Name Table A13 - Remote Control Function ListDMC1000 Cable/SAT GameTiVo Table A14 Remote Control Product Codes TV Table A15 Remote Control Product Codes AUX-HDTVTable A16 Remote Control Product Codes AUX-VCR Table A17 - Remote Control Product Codes AUX-CD Table A18 - Remote Control Product Codes DVDTable A24 Remote Control Product Codes AUX- TiVo Table A22 Remote Control Product Codes Media ServerAM Tuner Section FM Tuner SectionVideo Section General

AVR 360, AVR 460 specifications

The Harman-Kardon AVR 460 and AVR 360 are two outstanding models from the renowned audio equipment manufacturer, both designed to deliver high-quality sound experiences for home entertainment systems. These receivers combine advanced technologies with user-friendly features, making them popular choices among audiophiles and casual listeners alike.

The Harman-Kardon AVR 460 is equipped with a robust 7.1 channel surround sound system, boasting a total power output of 100 watts per channel. This receiver supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring immersive sound quality for movies and music alike. One of its standout features is the proprietary Harman Kardon Logic 7 technology, which enhances stereo sources to a multi-channel audio experience, maximizing the quality of any audio input.

On the other hand, the Harman-Kardon AVR 360 follows closely in features and audio performance, offering 7.1 channels as well but with a slightly lower power output of 80 watts per channel. It still excels in audio clarity and richness, making it suitable for any home theater setup. Both models provide extensive connectivity options, including HDMI inputs, legacy audio inputs, and built-in Bluetooth, allowing users to effortlessly stream music from their smartphones or tablets.

Another notable characteristic of the AVR 460 is its advanced video processing capabilities, enabling video upscaling to 1080p, ensuring that users can enjoy their content in the best possible resolution. Both receivers also incorporate multi-zone functionality, allowing different audio sources to be played in various rooms simultaneously. This feature makes them perfect for entertaining guests or enjoying music throughout the home.

The user interfaces for both models are designed with ease of use in mind, featuring intuitive on-screen menus and remote control functionality. They also support various audio calibration technologies, such as Harman's Room Correction, which optimizes sound output based on the specific acoustics of the listening environment.

In summary, the Harman-Kardon AVR 460 and AVR 360 are both exemplary audio/video receivers that combine advanced sound technologies, extensive connectivity options, and user-friendly features. Whether you are looking for immersive surround sound for movies or high-fidelity audio for music, these models are impressive choices that enhance any home theater setup, delivering exceptional performance for years to come.
Top Page Image Contents