Harman-Kardon Explore Harman Kardon Audio Features & Technical Specifications

Page 27

TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode, Continuous Average Power (FTC) AVR 360: 70 Watts per channel, 20Hz - 20 kHz AVR 460: 75 Watts per channel, 20Hz - 20 kHz

@ < 0.07% THD, both channels driven into 8 ohms

7 Channel Surround Modes

Power Per Individual Channel, with all channels driven

Front L&R channels:

AVR 360: 55 Watts per channel

AVR 460: 60 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel: AVR 360: 55 Watts AVR 460: 60 Watts

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, Back) channels: AVR 360: 55 Watts per channel

AVR 460: 60 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

AVR 360: 130 watts per channel into 6 ohms

AVR 460: 140 watts per channel into 6 ohms @1kHz, <1% THD, one channel driven.

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz –130kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16µsec

Slew Rate

40V/µsec

FM Tuner Section

Frequency Range

87.5–108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB (DIN)

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz: 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

Frequency Range

522–1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±9kHz, 30dB

Please register your AVR 460/AVR 360 at www.harmankardon.com.

NOTE: You’ll need the product’s serial number. At the same time, you can choose to be notified about new products and/or special promotions.

Video Section

Television Format

PAL

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite)

10Hz–8MHz (–3dB)

Video Frequency Response

 

(Component Video)

10Hz–100MHz (–3dB)

HDMI™

Version 1.3a with 10-bit Deep Color

General

Power Requirement

AC 230-240V/50Hz

Power Consumption

AVR 360: Standby < 1W,

 

540W maximum

 

AVR 460: Standby < 1W,

 

890W maximum

 

(7 channels driven)

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

382mm

Weight net

AVR 360 : 13,4 kg

 

AVR 460 : 13,5 kg

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

Features, specifications and appearance are subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. EzSet/EQ, Designed to Entertain and The Bridge III logo are trademarks of Harman International Industries, Incorporated.

Apple, iPod, iPhone, iTunes and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. iPod not included. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

A-BUS is a registered trademark of Leisure Tech Electronics Pty Ltd. Blu-ray Disc is a trademark of the Blu-ray Disc Association.

CEA is a registered trademark of the Consumer Electronics Association.

Manufactured under license from Dolby Laboratories. Dolby, the double-D symbol and Pro Logic are registered trademarks of Dolby Laboratories. MLP Lossless is a trademark of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 and other U.S. and worldwide patents issued and pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.

Faroudja DCDi Cinema is a trademark of Genesis Microchip Inc.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

SACD is a trademark of Sony Corporation.

TiVo is a registered trademark of TiVo Inc.

ENGLISH

27

Image 27
Contents AVR 460/AVR Important Safety Information Important Safety InstructionsTable of Contents and Features Surround Modes Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundIndicates that an LFE channel is present Dolby Surround SettingsStep Two Measure Speaker Distances Manual Speaker SetupStep Three Manual Setup Menu Step One Determine Speaker CrossoverAdjust Crossover Frequencies Menu Adjust Speaker Distance MenuSub Mode Audio Effects Step Four Setting Channel Output Levels ManuallyVideo Modes Video AdjustmentsColor Adjustment How to Adjust the Custom Picture SettingsBrightness Adjustment Contrast AdjustmentOperating the Multizone System System SettingsGeneral AVR Settings Multizone OperationPunch-Through Programming Advanced Remote Control FunctionsMenu Appearance System InformationLearning AVR 460 only Resetting the RemoteAppendix Default settings, worksheets, remote product codes Table A2 Source Setting DefaultsTable A1 Recommended Source Component Connections Audio Inputs Position Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults Channel Analog Your SettingsServer Radio Game Table A5 Source SettingsTable A6 Audio Effects Settings Media Default Cable/SatAuto Select Logic 7 Movie Or native digital Format Table A7 Video Modes SettingsBlack Level Off Deinterlacing Film Mode Detect Table A8 Surround ModesTable A9 Remote Control Codes Table A10 System SettingsTable A11 Zone 2 Settings Table A12 Surround Modes Surround Mode Description Incoming Bitstream or SignalDTS-HD Table A12Three variants are available Logic Tuner Setting to be offDTS 2/2/.0 or .1, 3/2/.0 or Cinema Analog 2-channel PCM 32kHz, 44.1kHz or 48kHz LogicButton Name Table A13 - Remote Control Function ListDMC1000 Cable/SAT GameTiVo Table A14 Remote Control Product Codes TV Table A15 Remote Control Product Codes AUX-HDTVTable A16 Remote Control Product Codes AUX-VCR Table A17 - Remote Control Product Codes AUX-CD Table A18 - Remote Control Product Codes DVDTable A24 Remote Control Product Codes AUX- TiVo Table A22 Remote Control Product Codes Media ServerGeneral FM Tuner SectionAM Tuner Section Video Section

AVR 360, AVR 460 specifications

The Harman-Kardon AVR 460 and AVR 360 are two outstanding models from the renowned audio equipment manufacturer, both designed to deliver high-quality sound experiences for home entertainment systems. These receivers combine advanced technologies with user-friendly features, making them popular choices among audiophiles and casual listeners alike.

The Harman-Kardon AVR 460 is equipped with a robust 7.1 channel surround sound system, boasting a total power output of 100 watts per channel. This receiver supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring immersive sound quality for movies and music alike. One of its standout features is the proprietary Harman Kardon Logic 7 technology, which enhances stereo sources to a multi-channel audio experience, maximizing the quality of any audio input.

On the other hand, the Harman-Kardon AVR 360 follows closely in features and audio performance, offering 7.1 channels as well but with a slightly lower power output of 80 watts per channel. It still excels in audio clarity and richness, making it suitable for any home theater setup. Both models provide extensive connectivity options, including HDMI inputs, legacy audio inputs, and built-in Bluetooth, allowing users to effortlessly stream music from their smartphones or tablets.

Another notable characteristic of the AVR 460 is its advanced video processing capabilities, enabling video upscaling to 1080p, ensuring that users can enjoy their content in the best possible resolution. Both receivers also incorporate multi-zone functionality, allowing different audio sources to be played in various rooms simultaneously. This feature makes them perfect for entertaining guests or enjoying music throughout the home.

The user interfaces for both models are designed with ease of use in mind, featuring intuitive on-screen menus and remote control functionality. They also support various audio calibration technologies, such as Harman's Room Correction, which optimizes sound output based on the specific acoustics of the listening environment.

In summary, the Harman-Kardon AVR 460 and AVR 360 are both exemplary audio/video receivers that combine advanced sound technologies, extensive connectivity options, and user-friendly features. Whether you are looking for immersive surround sound for movies or high-fidelity audio for music, these models are impressive choices that enhance any home theater setup, delivering exceptional performance for years to come.