English / B-13

DETERGENT (EDS) SYSTEM PREPARATION AND USE

COMMON INSTRUCTIONS:

The system should be purged of previous detergent when switching to a different detergent. SERVICE NOTE: Move machine over ﬂoor drain before purging because a small amount of detergent will be dispensed in the process.

To Purge When Changing Chemicals:

1Disconnect and remove the detergent cartridge.

2Turn the Key Switch (A) ON and press the Detergent Switch (F) and the Solution Switch (B) down for at least 2 seconds. NOTE: Once activated the purge process takes 10 seconds. See illustration on next page for Detergent System indicators. Normally one purge cycle is adequate to purge the system.

To Purge Weekly:

1Disconnect and remove the detergent cartridge. Install and connect a Cartridge ﬁlled with clean water

Detergent System indicators. Normally one purge cycle is adequate to purge the system.

When the Detergent Cartridge is almost empty a Display Panel (D) indicator will come on. This “Low Detergent” indicator will remain on until you reset the system. Once this indicator comes on you should be able to simply pour an entire gallon bottle of detergent into the Cartridge to reﬁll without worrying about measuring. NOTE: Only reset the system when the cartridge is full. When switching cartridges, the “Low Detergent” indicator is only accurate if the replacement cartridge is at the same level as the cartridge being replaced.

To Reset:

1Turn the Key Switch (A) ON and hold the Detergent Switch (F) down for 2 seconds. See illustration on next page for Detergent System indicators.

NON-REFILLABLE CARTRIDGE SPECIFIC INSTRUCTIONS: Remove the Cap (AA) and place the cartridge in the detergent box. Install the Dry Break Cap (BB) as shown.

REFILLABLE CARTRIDGE SPECIFIC INSTRUCTIONS:

Fill the detergent cartridge with a maximum of 4.73 Liters (1.25 gallons) of detergent. SERVICE NOTE: Remove the detergent cartridge from the detergent box prior to ﬁlling to avoid spilling detergent on the machine.

It is recommended that a separate cartridge be used for each detergent you plan to use. The detergent cartridges have

a white decal on them so you can write the detergent name on each cartridge to avoid mixing them up. The detergent cartridge has a Magnetic Slider (CC) on one end that needs to be set to the proper dilution ratio according to the dilution instructions on the manufacturer’s bottle. Slide the Magnet Slider (CC) to the appropriate location on Detergent Dilution Ratio Decal (DD). When installing a new cartridge, remove the Cap (AA) and place the cartridge in the detergent box. Install the Dry Break Cap (BB) as shown.

FORM NO. - 56041684 - BA 755, BA 855 - B-13

56315047(855 EDS), 56315043(755C), 56315042(755), 56315045(755 EDS), 56315044(855) specifications

Nilfisk-Advance America is renowned for its high-quality cleaning solutions, and among its impressive lineup, the models 56315046 (755C EDS), 56315044 (855), 56315045 (755 EDS), 56315042 (755), and 56315043 (755C) stand out for their performance and innovation. These machines are designed to meet the needs of various industrial cleaning applications, combining advanced technology with user-centric features.

The 56315046 (755C EDS) is a compact and highly efficient ride-on scrubber dryer equipped with Nilfisk's Enhanced Floor Cleaning System (EDS). This technology enables an exceptional cleaning performance by optimizing water usage and enhancing chemical application, resulting in cleaner floors with reduced detergent use. Its ergonomic design ensures operator comfort and ease of use, making it ideal for cleaning large areas in warehouses, distribution centers, and retail spaces.

The 56315044 (855) model is a robust, durable floor scrubber that is particularly suited for heavy-duty environments. It features a versatile scrub deck that can tackle different floor surfaces, ensuring thorough cleaning without damaging delicate materials. The machine’s intuitive controls allow for easy operations, even for less experienced staff, thus minimizing training time. Its high-capacity tank ensures extended run times, which boosts productivity in larger facilities.

In contrast, the 56315045 (755 EDS) offers similar EDS technology but in a more compact form factor, making it easier to navigate tighter spaces. This model achieves a powerful clean while maintaining energy efficiency, thanks to its advanced brushless motor that reduces wear and tear while extending the machine's lifecycle. The 56315042 (755) similarly provides a strong cleaning solution but focuses on simplicity and reliability, perfect for day-to-day cleaning tasks in various industrial applications.

Finally, the 56315043 (755C) combines the ergonomic benefits of a ride-on design with the robust features seen in the other models. It incorporates user-friendly controls, allowing operators to adjust settings quickly, optimizing performance based on cleaning requirements. Equipped with superior suction capabilities, it guarantees quick drying times, minimizing slip hazards in busy environments.

Each model in the Nilfisk-Advance America lineup showcases a commitment to quality, efficiency, and user comfort, making them vital assets for any facility aiming to maintain cleanliness and hygiene standards.