ENGLISH / B-11
INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
CAUTION!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1Make sure the Brush Deck is in the RAISED position. Make sure the Key Switch (A) is off (O).
2See Figure 3. To access the brushes loosen the black knobs (one on each side) on top of the idler assemblies (29) and remove the idler assemblies. Slide the brush into the housing, lift slightly, push and turn until it seats.
FIGURE 3
FORM NO. - 56041684 - BA 755, BA 855 -