Harman-Kardon AVR 745 RDS Operation, RDS Tuning, RDS Display Options, Program Search PTY

Page 58

29510_AVR745_Engelsk 30/10/06 9:32 Side 58

Tuner Operation

RDS Operation

The AVR is equipped with RDS (Radio Data System), which brings a wide range of informa- tion to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station program type, text messages about the station or specifics of a musical selection, and the correct time.

As more FM stations become equipped with RDS capabilities, the AVR will serve as an easy-to-use center for both information and entertainment.

This section will help you take maximum advan- tage of the RDS system.

RDS Tuning

When an FM station is tuned in and it contains RDS data, the AVR will automatically display the station’s call sign or other program service in the Main Information Display ˜.

RDS Display Options

The RDS system is capable of transmitting a wide variety of information in addition to the ini- tial station call sign that appears when a station is first tuned. In normal RDS operation the dis- play will indicate the station name, broadcast network or call letters. Pressing the RDS button

^enables you to cycle through the various data types in the following sequence:

The station’s call letters (with some private stations other information too).

The station’s frequency (FREQ).

The Program Type (PTY) as shown in the list below.

NOTE: Many stations do not transmit a specific PTY. The display will show NONE, when such a station is selected and PTY is active.

A “text” message (Radiotext, RT) containing special information from the broadcast station. Note that this message may scroll across the display to permit messages longer than the eight positions in the display. Depending on signal quality, it may take up to 30 seconds for the text message to appear; in that time, the word TEXT will flash in the Information Display when RT is selected.

The current time of day (CT). Note that it may take up to two minutes for the time to appear, in that time the word TIME will flash in the information display when CT is selected. Please note that the accuracy of the time data is dependent on the radio station, not the AVR.

Some RDS stations may not include some of these additional features. If the data required for the selected mode is not being transmitted, the Main Information Display ˜ will show a

NO TYPE, NO TEXT or NO TIME

message after the individual time out.

In any FM mode the RDS function requires a strong enough signal for proper operation.

Program Search (PTY)

An important feature of RDS is its capability of encoding broadcasts with Program Type (PTY) codes that indicate the type of material being broadcast. The following list shows the abbreviations used to indicate each PTY, along with an explanation of the PTY:

(RDS ONLY)

(TRAFFIC)

NEWS: News

AFFAIRS: Current Affairs

INFO: Infomation

SPORT: Sports

EDUCATE: Educational

DRAMA: Drama

CULTURE: Culture

SCIENCE: Sciencek

VARIED: Varied Speech Programs

POPM: Popular Music

ROCKM: Rock Music

M.O.R.M.: Middle-of-the-Road Music

LIGHTM: Classical Music

CLASSICS: Serious Classical Music

OTHERM: Other Music

WEATHER: Weather Information

FINANCE: Financial Programs

CHILDREN: Children’s Programs

SOCIAL A: Social Affairs Programs

RELIGION: Religious Broadcasts

PHONE IN: Phone-In Programs

TRAVEL: Travel and Touring

LEISURE: Leisure and Hobby

JAZZ: Jazz Music

COUNTRY: Country Music

NATIONAL: National Music

OLDIES: Oldies Music

FOLK M: Folk Music

DOCUMENT: Documentary Programs

TEST: Emergency Test

ALARM: Emergency Broadcast Information

You may search for a specific Program Type (PTY) by following these steps:

1. Press the RDS button ^ until the

current PTY is shown in the Main Information Display ˜.

2.While the PTY is shown, press the Preset Up/Down button GP or hold them pressed to scroll through the list of available PTY types, as shown above starting with the PTY currently received. To simply search for the next station transmitting any RDS data, use the Preset Up/Down button GP until RDS ONLY appears in the display.

3.Press any of the Tuning Up/Down buttons )P, the tuner begins to scan the FM band upwards or downwards for the first station that has RDS data that matches the desired selection, and acceptable signal strength for quality reception.

4.The tuner will make up to one complete scan of the entire FM band for the next station that matches the desired PTY type and has accept- able reception quality. If no such station is found, the display will read NONE for some seconds and the tuner will return to the last FM station in use before the search.

NOTE: Some stations transmit constant traffic information. These stations can be found by selecting TRAFFIC, the option in front of NEWS in the list. The AVR will find the next appropriate station, even if it is not broadcasting traffic information when the search is made.

58TUNER OPERATION

Image 58
Contents AVR 745 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionImportant Safety Information Introduction / Safety InformationUnpacking Front Panel Controls More information Coaxial ÓTo select between the Optical Surround Back Right Tan Subwoofer LFE Rear Panel ConnectionsSurround Left Blue Surround Right Gray Surround Back Left Digital AudioDigital recorder such as a CD-R or MiniDisc recorder AC Power Cord Jack Connect the ACDigital Audio Outputs Connect these Monitor Component Video Outputs+ and negative terminals AVR 745 when appropriate upgrades are availableRemote IR Carrier Output The output Main Remote Control Functions Power Button Press this button to turn a Device off  The Bridge /DMP Selector Zone II Remote Control FunctionsPower Off B AVR Selector Tions of the AVR or any compatibleOptional is connected to Digital Analog Video Equipment Connections Installation and ConnectionsAudio Equipment Connections Output jacksJacks Hdmi ConnectionsHdmi Input Connections Connection NotesVideo 2 or Video 3 Video Audio Hdmi Output ConnectionsScart A/V Connections Important Note for Adapter CablesWith Scart that cannot be switched and pro- vided by the AVR Important Note for the Use SCART-Cinch AdaptersMultiroom IR Link System and Power ConnectionsMain Room Remote Control Extension Remote IR Carrier Output Jack . If youUSB Connections AC Power ConnectionsRS-232 Connections Trigger Jack ConnectionSpeaker Placement Speaker SelectionRemote Control Setup Using the On-Screen Display System ConfigurationFirst Turn On System Setup In/Out SetupSystem Configuration D E O Video Monitor Settings Video SetupList of input source defaults is Advanced Configuration menus to be activeSettings available on Page 1 Advanced Configuration SettingsAdvanced Configuration menu are the following Audio Setup Surround SetupOn the ZR 10 remote Using EzSet/EQ Night Mode SettingsS I G N Ezset Design Step E POn the ZR 10 remote to continue S E TAVR If the sound is not to your liking, pressSpeaker Size Menu Manual SetupSpeaker Size Sub Mode Setting LFE Low-Pass-Filter SettingFollowing options are available Delay Settings Subwoofer ConfigurationSubwoofer Size Output Level Adjustment Setup EzSet/EQ II Preset Selection Additional Input AdjustmentsChannel Surround Mode ChartOperation DTS-ES 6.1 DiscreteChannel presentation of two-channel stereo programs DTS Neo6 CinemaBasic Operation Switched AC Outlets and the PowerUsing the Sleep Timer Source SelectionControls and Use of Headphones Or Video 1 or 2 Component InputsOne of the most important features Surround Mode SelectionDigital Audio Playback PCM Audio Playback Dolby DigitalRear panel Selecting a Digital SourceUSB Playback Digital Bitstream IndicatorsPanel Night Mode Speaker/Channel IndicatorsAudio, while the main feature is available Video Adjustments and Operation UsingDigital Audio Outputs Front Panel In/Outputs Output Level AdjustmentTape Recording EzSet/EQ II OperationDim Function Memory BackupSubwoofer Control Front-Panel-Display Fade Advanced FeaturesTurn On Volume Level Display BrightnessDMP/ TheBridgeTM Auto Power Semi-OSD SettingsFull-OSD Time Out Adjustment Hdmi Video Auto FunctionMultiroom Operation InstallationMultiroom Setup Multiroom OperationInfrared Output Selection Tuner Operation Preset TuningRecalling Preset Stations Basic Tuner OperationRDS Display Options RDS TuningRDS Operation Message after the individual time outPower Switch 1 is pushed Troubleshooting GuideProcessor Reset Press the AVR Selector BVideo Input Defaults System DefaultsVideo Source Defaults Worksheet C Delay Defaults and Setting Worksheet B Surround Configuration Defaults and SettingsWorksheet D System Defaults and Settings Video Video 3 Video Worksheet E Input SettingsTape Tuner Bridge Technical Specifications Harman Consumer Group, Inc