29510_AVR745_Engelsk 30/10/06 9:32 Side 60
APPENDIX
System Defaults
The two tables in this section show the factory default settings for the Video Inputs, Video Sources and Video Display Aspect Ratios. These tables give you the complete picture on the AVR 745’s initial settings. You may then decide whether any item needs to be changed so that it is more appropriate for your specific installation. Any of the settings shown may be changed as shown in the pages of the System Configuration section of this manual (pages 20 to 32).
Table 1: Video Input Defaults
INPUT | AUDIO | VIDEO | COMPONENT | TRIGGER 2 | RECORD |
| INPUT |
| INPUT | INPUT | VIDEO INPUT | SETTING | OUTPUT |
| SOURCE TYPE |
|
|
|
|
|
|
|
|
Video 1 | ANALOG | AUTO | COMPONENT 1 | ON | ANALOG | ON | VCR |
|
|
|
|
|
|
|
|
Video 2 | ANALOG | AUTO | COMPONENT 2 | ON | ANALOG | OFF | CABLE DIGITAL |
|
|
|
|
|
|
|
|
Video 3 | OPTICAL 1 | AUTO | COMPONENT 1 | ON | ANALOG | ON | CABLE ANALOG |
|
|
|
|
|
|
|
|
Video 4 | OPTICAL 4 | AUTO | COMPONENT 2 | ON | ANALOG | ON | SATELLITE DIGITAL |
|
|
|
|
|
|
|
|
DVD | COAX 1 | AUTO | COMPONENT 3 | ON | ANALOG | OFF | DVD |
|
|
|
|
|
|
|
|
HDMI 1 | HDMI 1 | HDMI 1 | ON | DSP DOWNMIX | OFF | * | |
|
|
|
|
|
|
|
|
HDMI 2 | HDMI 2 | HDMI 2 | ON | DSP DOWNMIX | OFF | * | |
|
|
|
|
|
|
|
|
Tuner | ANALOG | AUTO | COMPONENT 1 | ON | ANALOG | * | |
|
|
|
|
|
|
|
|
CD | ANALOG | AUTO | COMPONENT 3 | ON | ANALOG | OFF | * |
|
|
|
|
|
|
|
|
Tape | ANALOG | AUTO | COMPONENT 1 | ON | ANALOG | OFF | * |
|
|
|
|
|
|
|
|
DMP/The Bridge | ANALOG | HDMI 1 | COMPONENT 1 | ON | ANALOG | * | |
|
|
|
|
|
|
|
|
6/8 CH Direct | ANALOG | HDMI 1 | COMPONENT 1 | ON | ANALOG | * | |
|
|
|
|
|
|
|
|
USB | HDMI 1 | COMPONENT 3 | ON | DSP DOWNMIX | * | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*: User should change setting to match input type.
Table 2: Video Source Defaults
FEATURE | DVD | VCR | CABLE DIG | SAT DIG | SAT ANALOG | CABLE ANALOG | CAMERA DIG | CAMERA ANALOG |
Noise Reduction | OFF | ON | OFF | OFF | ON | ON | OFF | ON |
ON | ON | ON | ON | ON | ON | ON | ON | |
DCDi Interpolation | ON | ON | ON | ON | ON | ON | ON | ON |
Film Mode Detect | ON | ON | ON | ON | ON | ON | ON | ON |
Film Mode Edit Detect | ON | ON | ON | ON | ON | ON | ON | ON |
Composite Video Enhancement | ON | ON | ON | ON | ON | ON | ON | ON |
VCR Sync Time Enhancement | ON | ON | ON | ON | ON | ON | ON | ON |
|
|
|
|
|
|
|
|
|
System Default and Personal Settings Worksheets
The worksheets in this section show the system defaults for the global settings on your AVR 745. Once your system is configured manually, or through the use of EzSet/EQ II, where applicable, we recommend that you use the “Your System Settings” column to record your personal preferences so that they may be restored in the event the AVR’s memory is lost due to an extended power outage, system upgrade, processor reset, or other major service to your unit. Additional copies of this worksheet may be downloaded from the Harman Kardon web site at www.harmankardon.com
Worksheet A: Video Monitor and Aspect Ratio Defaults and Settings
Feautre/Display Type | System Default | Your System Setting |
Display Interface | Analog |
|
HDMI Audio Out | Off |
|
CRT | 4:3 |
|
Front Projection | 4:3 |
|
Rear Projection | 4:3 |
|
Plasma (PDP) | 16:9 |
|
DLP™ | 16:9 |
|
LCD | 16:9 |
|
60APPENDIX