Eureka 2590 Series Use, Carpet Cleaning, Transporting the Extractor, Emptying the Recovery Tank

Page 6

STEP

2

USE

A. Carpet Cleaning

1)Adjust shampoo control, from MAX = for heavy traffic areas to RINSE = clear water only.

2)Plug in cord.

3)Lift handle to operating position.

Shampoo/

Rinse

Button

Power Switch

II Brushes

ISuction Only

0 OFF

Carrying

Handle

Shampoo

Control

Handle

Release Pedal

4)Push power switch to II position for agitation of brush.

5)Push the handle foot release and recline handle to use position. Push shampoo/rinse button and hold to apply solution and move the unit forward and then backward at a moderate pace two times. As the nozzle moves over the carpet, the cleaning solution is sprayed onto the carpet. At the same time the nozzle picks up the dirty water and places it in the recovery tank. It is important to move the unit in a steady motion.

6)Release the button to stop the solution flow. Avoid over- soaking.

7)Move the extractor over the carpet several more times without pushing the shampoo/rinse button. This removes excess water and helps the carpet dry faster.

8)Repeat steps 5, 6, and 7 on heavily soiled areas.

B.Transporting the Extractor

When moving the unit from one location to another, always make sure the recovery and clean water solution tanks are completely empty. Then tilt the unit slightly backward and roll on rear wheels or use the carrying handle for transporting up and down stairs. (See page 4)

C. Emptying the Recovery Tank

CAUTION: Turn off the power switch and unplug the extractor to empty the recovery tank.

1) Pull straight up to remove the recovery tank from the unit.

2) Remove the automatic shut-off (see illustration) and empty contents into a suitable water drain.

3) Rinse out the waste water recovery tank thoroughly.

4) Remove and clean the float and filter by rinsing it with water after each use. Place the same float and filter back into the recovery tank.

5) Gently push the tank all the way into unit until secure.

6)Resume cleaning or store.

D. Automatic Shut-Off

The automatic suction shut-off functions when the waste water recovery tank is full of liquid. This can be detected by a noticeable difference in the motor sound. Immediately turn off the unit when this happens and empty the recovery tank.

Automatic

Suction

Shut-Off

Filter

Recovery Tank

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Deep Steam Extractor Service Information IndexAutomatic Suction Shut-Off Grounding Instructions Before YOU BeginFeature Guide Store Electrical CordWhat is OptiHEAT? SET UPWhy is heated cleaning better? Fill Clean Water TankUSE Carpet CleaningEmptying the Recovery Tank Transporting the ExtractorClean Suction Cover Clean UP and StorageEmpty the Recovery Tank Folding the Handle for Compact StorageClean UP and Storage Store the AccessoriesFabric Code Ratings Upholstery and Stair Cleaning Before You BeginTest clean a hidden area Check the stuffing material if possibleEureka Limited Warranty

2590 Series specifications

The Eureka 2590 Series represents a significant advancement in modern cleaning technology, showcasing a blend of performance, efficiency, and user-friendly design. This series is engineered to meet the diverse cleaning needs of households, offering a range of features that cater to various surfaces and environments.

One of the standout features of the Eureka 2590 Series is its powerful motor, which delivers robust suction capabilities. This ensures that dirt, dust, and debris are effectively removed from carpets and hard floors alike. The series is equipped with multi-surface cleaning technology, allowing users to seamlessly switch between cleaning modes for different surfaces without needing to change attachments.

Another highlight of the Eureka 2590 Series is its lightweight design, which enhances portability and ease of use. Weighing significantly less than traditional vacuum cleaners, this series allows users to maneuver effortlessly around the home while reducing fatigue during cleaning sessions. The ergonomic handle further adds to the comfort, making it easier to navigate around furniture and tight spaces.

The filtration system in the Eureka 2590 Series is designed to capture allergens and fine particles, making it an ideal choice for allergy sufferers. The HEPA filters work in tandem with a sealed system, ensuring that dust and allergens are trapped inside the vacuum, promoting cleaner air quality in the home.

Technology also plays a pivotal role in the Eureka 2590 Series. The series incorporates smart technology features, including intuitive LED indicators that alert users when the dust cup needs to be emptied or if the filters require maintenance. This ensures the vacuum operates at peak performance, prolonging its lifespan and maintaining its efficiency.

Additionally, the Eureka 2590 Series includes a range of tools and attachments designed to enhance its cleaning capabilities. From crevice tools for tight spaces to dusting brushes for delicate surfaces, these accessories provide versatility for a thorough cleaning experience.

Overall, the Eureka 2590 Series combines powerful suction, lightweight design, advanced filtration, and smart technology, making it a versatile and effective cleaning solution for any household. Its focus on user-friendly features and performance positions it as a valuable addition to the growing market of modern cleaning devices, ensuring that users can maintain clean and healthy living spaces with ease.
Top Page Image Contents