Maintenance and care
Machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts air when the portable deep cleaner is detached. This should be checked and cleaned regularly for any dirt and debris.
1.Step on the pedal and remove the portable spot cleaner.
Remove dirty tank.
2.Remove two screws and pull off suction gate door.
3.Wipe suction gate clean and rinse suction gate door.
4.Replace suction gate door and two screws.
Cleaning spray tips
1.Step on the pedal and remove the portable spot cleaner. To remove, push in tab and pull it out.
2.Clean by rinsing under hot water.
3.Replace by snapping back in.
4.Repeat steps on second spray tip.
WARNING:
To reduce the risk of fire, elec- tric shock, or injury, turn power OFF and disconnect plug from electrical outlet before perform- ing maintenance or trouble- shooting.
2.
Suction
Gate
Spray
Tips
1.
Cleaning solution filter
1. Step on the pedal and remove the |
|
portable spot cleaner. Remove the red |
|
solution filter cap on the base of the | 2. |
machine by inserting a coin or a flat |
head screw driver into the slot on the top.
2.Turn counter clockwise to unscrew. Set aside.
3.Remove the white filter by the post. Rinse the filter under water.
4.Replace the white filter back into the filter area.
Note: Make sure the white filter is seated properly before replac- ing the red solution filter cap.
5.Replace the red solution filter cap and turn clockwise to tighten.
Solution
Filter Cap
3.
5.
Filter
13
w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |