Operations
Before you clean
1.Move furniture to another area if cleaning an entire room (optional).
2.Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
3.Pretreating (optional):
3a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways.
3b. BISSELL Tough Stain precleaner
Spray the BISSELL Tough Stain precleaner formula onto heavy traffic areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, using the deep cleaner in upright mode, following the instructions below.
Upright cleaning mode
Filling formula & water tank
1.Remove tank from the base of the machine by lifting up tank carry handle.
Note: This tank was designed with a flat bottom so it can be easily filled.
2.Unscrew the black cap and remove bottle insert.
3.Fill tank with hot tap water to the water fill line. Add two ounces of BISSELL 2X for- mula to the tank.
4.Replace the bottle insert in the tank and tighten the black cap. Replace the tank on the deep cleaner.
Cleaning
1.Plug into a proper outlet and press the power button. Allow 1 minute for the hot water heater to
2.While pressing the trigger, make one slow forward wet pass and another one back.
ATTENTION:
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum or deep cleaner may aggra- vate this condition.
3b.
1.2.
8 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |