Assembly
Your deep cleaner comes in two easy to assemble components:
1.Upper handle
2.Portable spot cleaner/Base
The only tool you will need to assemble your cleaner is a Phillips screwdriver.
1.Slide upper handle onto base
2.Screw the four included screws into the marked holes.
Note: two of the holes are located underneath the support handle indi- cated by graphics. Angle screwdriver to secure into place.
1.2.
1.
Screw Holes
3. | Wrap power cord around Quick Release | 2. |
| Cord Wrap. | |
4. | Wrap flex hose around the hose wrap |
|
| and secure with hose secure latch. |
|
5. | Snap attachment(s) into the back of unit. |
|
Warning:
Do not plug in your cleaner until you have completely assembled it per the above instructions and are familiar with all instructions and operat- ing procedures.
6 w w w. b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |