Bissell 73H5, 35K3 Brush removal and large belt replacement as needed, Bissell Consumer Services

Maintenance and care

Brush removal and large belt replacement (as needed)

Brushes can be removed for cleaning or replacement as needed.

1.Follow small belt removal Instructions on page 14 items 1-7.

2.Remove brush rolls by pulling them off of the metal rods. Be careful not to lose the small washer at each end of the brush rolls.

3.Re-attach the large belt to the grooves on the end of the new brush rolls. If the belt is damaged, replace with a new belt.

4.Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure the brush is seated completely on the rod.

5.Replace small belt over grooves in back roller and metal cog.

6.Replace pivot arm and secure with silver screw.

7.Re-attach end cap by tightening with the

(3) black screws.

8.Return front nozzle to front of unit, by latching from underneath and then securing with 3 screws.

9.Follow step number 8 & 9 on page 14.

If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call

BISSELL Consumer Services.

WARNING:

To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

2.3.

4.5.

6.7.

15

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1