Harman-Kardon Advanced Functions and Resetting for Harman Kardon AVR 3600 Stereo Receiver
Page 47

ADVANCED FUNCTIONS

NOTE: Use caution when programming complicated activities. It isn’t possible to program a pause or delay before sending commands after Power On, and the component may not be ready to respond to commands immediately after powering on.

To program, or “record” an activity, follow these steps:

1.To enter Program mode, simultaneously press and hold the Activity Button and the Alphanumeric Key or AVR Power On or Off Button to which the activity will be assigned.

2.Press the Source Selector (or Setup Button) for each device before you enter individual commands. This step counts as one of the 19 commands allowed for each activity.

3.For Power On, press the AVR or Device Power On Button.

4.Press the AVR or Device Power Off Button for Power Off.

5.Press the Activity Button to end the programming process, and the last Source Selector (or the Setup Button) will flash three times.

It isn’t possible to “edit” a command within an activity. To erase the activity:

1.Press and hold the Activity Button and the Alphanumeric Key or AVR Power On or Off Button until the Source Selector or Setup Button lights.

2.Press the Activity Button to erase the activity.

To execute an activity, press the Activity Button, then press the Alphanumeric Key (or the AVR Power On or Off Button) for the Activity.

Learning

If you have programmed a product’s codes into the remote and find that some functions are missing, the AVR 3600 remote may “learn” individual codes from the product’s original remote. See page 26.

Resetting the Remote

To reset the remote to its factory defaults, simultaneously press and hold the TV Source Selector and the “0” Alphanumeric Key. When the TV Button re-lights, enter the code “333”. When the TV Button goes out, and all of the Source Selectors flash, the remote will be reset.

PROCESSOR RESET

If the unit behaves erratically after a power surge, first tun off the Main Power Switch and unplug the AC power cord for at least

3 minutes. Plug the cord back in and turn the receiver on. If this doesn’t help, reset the AVR.

NOTE: A system reset erases all user configurations, includ- ing video resolution, speaker and level settings, and tuner presets. After a reset, reenter all of these settings from your notes in the appendix worksheets.

To reset the AVR 3600, place it in Standby mode (press the front- panel Standby/On Switch so that the Power Indicator turns amber). Then press and hold the front-panel OK Button for at least 5 seconds until the RESET message appears.

If the receiver does not function correctly ofter a processor reset, contact an authorized Harman Kardon service center for assistance Authorized service centers may be located by visiting the Web site at www.harmankardon.com.

NOTE: After performing a system reset, wait at least 1 minute before pressing any Source Selectors.

MEMORY

If the AVR 3600 is unplugged or experiences a power outage, it will retain user settings for up to four weeks.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents AVR Wet Location Marking Safety InformationImportant Safety Instructions Service Instructions Outdoor Use MarkingUnpacking Important Safety InformationFPO Table of ContentsSurround Modes IntroductionDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video InputsControls FrontPanel FRONT-PANEL Controls On When the AVR is turned on, this LED turns whiteVolume Knob Turn this knob to raise or lower the volume Connections RearAlways make a separate audio connection REAR-PANEL ConnectionsUse an HDMI-to-DVI adapter AM and FM Antenna Terminals Connect the included Main Remote Control Functions Surround Modes Press to directly access the Surround AVR Power Off Button Press to turn off the AVRMain Remote Control Functions Menu Navigation Zone 2 Remote Control FunctionsIR Transmitter Mute Source Selectors Sleep Settings Zone 2 Remote Control Functions Harman International the Harman Kardon parent company Logic Introduction to Home TheaterTypical Home Theater System Multichannel AudioAudio Connections Connecting Source Devices to the AVRSpeaker Connections SubwooferAnalog Video Video ConnectionsAnalog Audio Digital VideoUSB Port AntennasSubwoofer Placement Speaker PlacementFront Speaker Placement Placement of Surround Speakers in a 5.1-Channel SystemGame Media Server Getting StartedSource Assignment Worksheet Getting Started Installation Step Eleven Insert Batteries in Remote Step Nine Install a Multizone SystemStep TEN Plug in AC Power Cords Connect IR Control Devices to the Zone 2 IR InputTwo steps are required the first time you turn on the AVR Step Twelve Program Sources Into the RemoteLearning Step Thirteen Turn On the AVRInstallation Configure the AVR 3600, Using EzSet/EQ Technology Initial SetupUsing the ON-SCREEN Menu System Established by the EzSet/EQ process Set Up SourcesAudio and Video Input Selection Channel Inputs You are now ready to begin enjoying your new receiver Operation Volume ControlDolby Volume Dolby Volume Calibration OffsetMute Function Sleep TimerHeadphones Using the RadioRecording Sirius Satellite Radio OperationPrevious Track Using Docking StationUsing The Bridge Remote Control KeyPlay Pause Menu Back/Exit or Left Arrow Select IPod Manual ModeSelecting a Surround Mode Operation Audio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsVideo Game Logic 7 Game Dolby Surround SettingsManual Speaker Setup Number of Speakers Step Three Manual Setup MenuStep ONE Determine Speaker Crossover Step TWO Measure Speaker DistancesSub Mode Adjust Crossover Frequencies MenuAdjust Speaker Distance Menu Video Adjustments Step Four Setting Channel Output Levels ManuallyVideo Modes Menu Video ModesHow to Adjust the Custom Picture Settings General AVR Settings System SettingsPunch-Through Programming Advanced Remote Control FunctionsMenu Appearance System InformationTo program, or record an activity, follow these steps Resetting the RemoteProcessor Reset MemorySymtom Cause Solution Troubleshooting GuideTable A1 Recommended Source Component Connections Table A2 Source Setting DefaultsAppendix Analog Audio Inputs Table A3 Speaker/Channel Setting DefaultsTable A4 Delay Setting Defaults All Digital and 2-Channel Your SettingsBridge Table A5 Source SettingsTable A6 Audio Effects Settings DefaultAuto Select Table A7 Video Modes SettingsBlack Level Off Deinterlacing Film Mode Detect Table A8 Surround ModesTable A11 Zone 2 Settings Table A9 Remote Control CodesTable A10 System Settings Table A12 Surround Modes Surround Mode Description Incoming Bitstream or SignalTable A12 Channel music recordings DTS StereoPresentation DTS Neo6 DTS 2/2/.0 or .1, 3/2/.0 or41 42 Radio Table A13 Remote Control Function ListAUX Table A13Table A14 Remote Control Product Codes TV Table A16 Table A15 Remote Control Product Codes AUX-HDTVTable A16 Remote Control Product Codes AUX-VCR Table A14Table A17 Table A17 Remote Control Product Codes AUX-CDTable A18 Remote Control Product Codes DVD Table A21 Remote Control Product Codes Cable Table A19 Remote Control Product Codes SATTable A20 Remote Control Product Codes Game Table A21 Table A22 Remote Control Product Codes AUX-MEDIA ServerTable A24 Remote Control Product Codes AUX- TiVo Audio Section AVR 3600 Technical Specifications

AVR 3600 specifications

The Harman-Kardon AVR 3600 is a high-performance audio/video receiver that brings exceptional sound quality and advanced features to home entertainment systems. Known for its sleek design and powerful performance, the AVR 3600 is engineered to deliver an immersive audio experience that meets the needs of both casual listeners and serious audiophiles.

One of the standout features of the AVR 3600 is its multi-channel audio capabilities, supporting the latest surround sound formats such as Dolby Atmos and DTS:X. This enables users to enjoy a three-dimensional audio experience, where sounds can be precisely placed and moved around in space, enhancing the realism of movies, music, and games. With a robust amplifier section, the AVR 3600 offers impressive power output, ensuring that even the most dynamic content can be enjoyed to its fullest.

Another significant characteristic of the AVR 3600 is its extensive connectivity options. The receiver is equipped with multiple HDMI inputs, allowing for seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI inputs support 4K Ultra HD video passthrough, as well as HDR10 and Dolby Vision for stunning visuals. Additionally, the AVR 3600 includes legacy connections, such as optical and coaxial inputs, making it versatile for older equipment.

The AVR 3600 also features advanced calibration technologies, allowing users to optimize the sound for their specific room layout. The built-in Auto Calibration technology analyzes the acoustics of the space and adjusts settings accordingly, ensuring optimal performance. This feature is particularly beneficial for users who may not have the expertise to manually adjust settings.

For those who value easy control and management of their entertainment systems, the AVR 3600 is compatible with various smart home technologies. It supports wireless connectivity through built-in Wi-Fi and Bluetooth, enabling users to stream their favorite music from mobile devices effortlessly. The user interface, accessible via the receiver’s on-screen menu, is intuitive, allowing for easy navigation and control.

In summary, the Harman-Kardon AVR 3600 combines advanced audio technologies, versatile connectivity, and user-friendly features, making it an excellent choice for anyone looking to elevate their home theater experience. With its powerful audio performance and modern capabilities, the AVR 3600 stands as a strong contender in the competitive AVR market.
Top Page Image Contents