Harman-Kardon AVR 3600 owner manual System Settings, General AVR Settings

Page 45

ADVANCED FUNCTIONS

Convergence and Edge Focus

The crosshatch pattern that may surround the test screen may be used to evaluate edge focus and convergence in front- or rear- projection video displays. If you are unable to improve the picture using the available controls, contact the video display manufacturer’s authorized service representative for assistance.

When you have finished making any video adjustments, press the Back/Exit Button.

MULTIZONE OPERATION

With the multizone system in use, you may enjoy an exciting

5.1-channel home theater presentation in the main listening area, while others listen to the same materials or an entirely different presentation in another room.

Although installation of a multizone system is not complicated, it requires running wires inside walls. Check your local building codes and comply with the requirements for in-wall wiring systems, to prevent the possibility of a dangerous situation. If you have any questions about installing a multizone system, it is strongly recom- mended that you contact a professional custom installer. See Step Eleven of the Installation section on page 25 for instructions on installing a multizone system.

Operating the Multizone System

The AVR 3600’s multizone system is accessed using the on-screen Zone 2 menu. Press the Setup Button, and use the 1/5 Buttons to navigate to the Zone 2 line. Press the OK Button to display the Zone 2 menu. See Figure 38.

Volume: The volume is controlled separately for the remote zone.

Surround Back Amps: Reassign the surround back channels to the multizone system. When this line is set to Zone 2, you may only configure the main listening room for up to 5.1 channels. EzSet/EQ will only configure the main system. Use the Manual Setup section of the Speaker Setup menu to configure the remote speakers with this setting at Main Room, then return this setting to Zone 2.

To operate the multizone system using the main remote, slide the Zone Select Switch at the bottom of the remote to the “2” position. To select a zone using the Zone 2 remote, press the Zone Selector, and the Zone Indicator will turn green when the remote is set to operate Zone 1, or red to operate Zone 2.

SYSTEM SETTINGS

The AVR 3600 offers system settings for ease of use. These settings may be accessed from the System Settings menu, which is selected by pressing the Setup Button and navigating to the System line. Press the OK Button to display the System Settings menu. See Figure 39.

Figure 38 – Zone 2 Menu

Status: Turns the multizone system on or off. When no one is listening in the remote room, leave this setting at the default of OFF.

Source: Indicates the source input for the remote zone. You may select a different source from the main listening area. However, if the same source has been selected for both the main listening area and the remote zone, listeners in both areas will hear the same content.

NOTE: Only analog audio sources, including The Bridge III, are available to the multizone system. To hear digital devices, such as a CD player, in the remote zone, follow these steps:

1.In addition to a digital audio connection, connect the source device’s analog audio outputs to the AVR. Make a note in Table A5 in the appendix which set of inputs was used.

2.In the Info Settings menu, leave the Audio Input from Source setting at the digital audio input. Scroll down to the Zone 2 Audio setting and select the analog audio input.

Figure 39 – Systems Settings Screen

Front-Panel Dimmer: Select On 100% for full brightness, dim to 50% or 25% of full brightness or select Off to fully darken the display. The light inside the Volume Control will go out when the display is partly or fully dimmed, but the Power Indicator will always remain lit to remind you that the AVR is powered on.

General AVR Settings

Volume Units: Select whether volume is displayed in the conventional decibel scale or on a numeric scale from 0 to 90. When the decibel scale is used, 0dB is the maximum recommended volume, with lower volumes displayed as negative values.

Volume Default and Volume Default Level: These two settings are used together to program the volume level at turn-on. Turn Volume Default on, and then set the Volume Default Level to the desired turn-on volume. When the Volume Default setting is left off, the AVR will play at the last-used volume setting from the previ- ous listening session.

Unit of Measure: Adjusts the speaker-distance settings for Manual Speaker Setup. Select between meters and feet.

Language: Select the preferred language for the AVR’s on-screen

menus and displays: English, French, Spanish, German, Italian or Russian.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents AVR Important Safety Instructions Safety InformationService Instructions Outdoor Use Marking Wet Location MarkingUnpacking Important Safety InformationFPO Table of ContentsSurround Modes IntroductionAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFront PanelControls On When the AVR is turned on, this LED turns white Volume Knob Turn this knob to raise or lower the volumeFRONT-PANEL Controls Connections RearREAR-PANEL Connections Use an HDMI-to-DVI adapterAlways make a separate audio connection AM and FM Antenna Terminals Connect the included Main Remote Control Functions Surround Modes Press to directly access the Surround AVR Power Off Button Press to turn off the AVRMain Remote Control Functions Zone 2 Remote Control Functions IR Transmitter Mute Source Selectors Sleep SettingsMenu Navigation Zone 2 Remote Control Functions Typical Home Theater System Introduction to Home TheaterMultichannel Audio Harman International the Harman Kardon parent company LogicSpeaker Connections Connecting Source Devices to the AVRSubwoofer Audio ConnectionsAnalog Audio Video ConnectionsDigital Video Analog VideoUSB Port AntennasFront Speaker Placement Speaker PlacementPlacement of Surround Speakers in a 5.1-Channel System Subwoofer PlacementGetting Started Source Assignment WorksheetGame Media Server Getting Started Installation Step TEN Plug in AC Power Cords Step Nine Install a Multizone SystemConnect IR Control Devices to the Zone 2 IR Input Step Eleven Insert Batteries in RemoteLearning Step Twelve Program Sources Into the RemoteStep Thirteen Turn On the AVR Two steps are required the first time you turn on the AVRInstallation Initial Setup Using the ON-SCREEN Menu SystemConfigure the AVR 3600, Using EzSet/EQ Technology Set Up Sources Audio and Video Input SelectionEstablished by the EzSet/EQ process Channel Inputs You are now ready to begin enjoying your new receiver Dolby Volume Volume ControlDolby Volume Calibration Offset OperationHeadphones Sleep TimerUsing the Radio Mute FunctionRecording Sirius Satellite Radio OperationUsing The Bridge Using Docking StationRemote Control Key Previous TrackIPod Manual Mode Selecting a Surround ModePlay Pause Menu Back/Exit or Left Arrow Select Operation Digital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundDolby Surround Settings Manual Speaker SetupVideo Game Logic 7 Game Step ONE Determine Speaker Crossover Step Three Manual Setup MenuStep TWO Measure Speaker Distances Number of SpeakersAdjust Crossover Frequencies Menu Adjust Speaker Distance MenuSub Mode Video Adjustments Step Four Setting Channel Output Levels ManuallyVideo Modes Menu Video ModesHow to Adjust the Custom Picture Settings General AVR Settings System SettingsMenu Appearance Advanced Remote Control FunctionsSystem Information Punch-Through ProgrammingProcessor Reset Resetting the RemoteMemory To program, or record an activity, follow these stepsSymtom Cause Solution Troubleshooting GuideTable A2 Source Setting Defaults AppendixTable A1 Recommended Source Component Connections Table A4 Delay Setting Defaults Table A3 Speaker/Channel Setting DefaultsAll Digital and 2-Channel Your Settings Analog Audio InputsTable A6 Audio Effects Settings Table A5 Source SettingsDefault BridgeBlack Level Off Deinterlacing Film Mode Detect Table A7 Video Modes SettingsTable A8 Surround Modes Auto SelectTable A9 Remote Control Codes Table A10 System SettingsTable A11 Zone 2 Settings Table A12 Surround Modes Surround Mode Description Incoming Bitstream or SignalTable A12 Presentation DTS Neo6 DTS StereoDTS 2/2/.0 or .1, 3/2/.0 or Channel music recordings41 42 Radio Table A13 Remote Control Function ListAUX Table A13Table A14 Remote Control Product Codes TV Table A16 Remote Control Product Codes AUX-VCR Table A15 Remote Control Product Codes AUX-HDTVTable A14 Table A16Table A17 Remote Control Product Codes AUX-CD Table A18 Remote Control Product Codes DVDTable A17 Table A19 Remote Control Product Codes SAT Table A20 Remote Control Product Codes GameTable A21 Remote Control Product Codes Cable Table A22 Remote Control Product Codes AUX-MEDIA Server Table A24 Remote Control Product Codes AUX- TiVoTable A21 Audio Section AVR 3600 Technical Specifications

AVR 3600 specifications

The Harman-Kardon AVR 3600 is a high-performance audio/video receiver that brings exceptional sound quality and advanced features to home entertainment systems. Known for its sleek design and powerful performance, the AVR 3600 is engineered to deliver an immersive audio experience that meets the needs of both casual listeners and serious audiophiles.

One of the standout features of the AVR 3600 is its multi-channel audio capabilities, supporting the latest surround sound formats such as Dolby Atmos and DTS:X. This enables users to enjoy a three-dimensional audio experience, where sounds can be precisely placed and moved around in space, enhancing the realism of movies, music, and games. With a robust amplifier section, the AVR 3600 offers impressive power output, ensuring that even the most dynamic content can be enjoyed to its fullest.

Another significant characteristic of the AVR 3600 is its extensive connectivity options. The receiver is equipped with multiple HDMI inputs, allowing for seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. The HDMI inputs support 4K Ultra HD video passthrough, as well as HDR10 and Dolby Vision for stunning visuals. Additionally, the AVR 3600 includes legacy connections, such as optical and coaxial inputs, making it versatile for older equipment.

The AVR 3600 also features advanced calibration technologies, allowing users to optimize the sound for their specific room layout. The built-in Auto Calibration technology analyzes the acoustics of the space and adjusts settings accordingly, ensuring optimal performance. This feature is particularly beneficial for users who may not have the expertise to manually adjust settings.

For those who value easy control and management of their entertainment systems, the AVR 3600 is compatible with various smart home technologies. It supports wireless connectivity through built-in Wi-Fi and Bluetooth, enabling users to stream their favorite music from mobile devices effortlessly. The user interface, accessible via the receiver’s on-screen menu, is intuitive, allowing for easy navigation and control.

In summary, the Harman-Kardon AVR 3600 combines advanced audio technologies, versatile connectivity, and user-friendly features, making it an excellent choice for anyone looking to elevate their home theater experience. With its powerful audio performance and modern capabilities, the AVR 3600 stands as a strong contender in the competitive AVR market.
Top Page Image Contents