Operation
Fill the 2-in-1 water tank
1.Remove the tank from the base of the machine by lifting the tank carry handle.
2.Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup.
3.Fill formula to the indicated fill line on the built in measuring cup and pour into mouth of the bladder.
If using BISSELL 3X Concentrate formulas: add one capful of formula directly into the mouth of the bladder.
4.Fill the bladder with clean hot tap water.
*Do not boil or microwave water as it can destroy the bladder.
5.Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make sure it is secure before picking up the tank.
6.Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position.
10 w w w . b i s s e l l . c o m
1.2.
3.4.
5.6.
8 0 0 . 2 3 7 . 7 6 9 1
6/26/08 2:23:10 PM |