Bissell 64D9, 25A3 warranty Empty the 2-in-1 water tank/ clean removable nozzle, Ready Tools

1.Turn power switch off. Remove the 2-in-1 water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank.

2.Empty collection water from bottom of tank.

3.After each use, remove and rinse the lint screen located on the tank lid.

4.If nozzle needs to be cleaned: remove by grasping handle at the top and pulling forward. Clean removable nozzle by rinsing under running water.

5.When finished, replace nozzle by slightly raising front of machine to line up slots on the base with the hooks on nozzle. Attach at base first and then click nozzle into place.

NOTE: If nozzle is not attached properly loss of suction will occur.

6.To continue carpet cleaning, refer back to pages 10 through 11, beginning with “Fill the 2-in-1 water tank” on page 10.

If cleaning is complete, refer to the “Maintenance and care” section on page 15.

Ready Tools™

Your ProHeat deep cleaner comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more.

Important! If using the machine to clean upholstery, check upholstery tags.

1.Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your PROHeat. If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only,” do not proceed. Do not use on vel- vet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.

2.Check for colorfastness in an inconspicuous place.

3.If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.

4.Plan activities to give upholstery time to dry.

1.2.

Lint Screen

3.4.

5.

Manufacturer’s tag

12 w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1