Operating Instructions, Components | Euro-Pro SC507H specification

OPERATING INSTRUCTIONS

Attaching the Shoulder Strap

Using the detachable shoulder strap allows for greater freedom of movement when both hands are needed for various cleaning tasks. To attach the shoulder strap to the steam cleaner, simply snap the shoulder strap hooks

onto the connecting rings on the unitFig. 13 body. See Fig. 11, 12 & 13.

Connecting

points

Fig. 11

IMPORTANT: When using the steam cleaner with the shoulder strap, avoid rocking or tilting the unit excessively as this may cause water to enter the hose and be discharged along with the steam.

Fig. 12

Components

Power “On” Light (red): This light will illuminate when the unit is plugged into the 120V. wall outlet. It will then turn “green” when the steam is ready.

CAUTION: Read the instructions for “Filling the Water Tank” before opening the Safety Cap.

CAUTION: Always unplug before filling. ALLOW UNIT TO

COOL FOR FIFTEEN (15)

MINUTES BEFORE REFILLING.

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the boiler in this appliance. Use tap water or distilled/purified water if the tap water in your area is very hard.

Filling or Refilling Your Steam Cleaner With Water

IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior to initial filling or re-filling the water tank and has been allowed to cool for 15 minutes. Never attempt to fill this unit under a water tap, always use the filling funnel provided.

Step 1: Before refilling the steam cleaner, make sure that the unit is NOT plugged in and has been allowed to cool for fifteen (15) minutes.

Step 2: Plug the power cord in to an electrical outlet and press the steam trigger on the hand grip to vent any residual steam that is in the boiler.

Step 3: Remove the power cord from the electrical outlet.

Step 4: Place the unit on a flat, stable surface. Slowly turn the safety filler cap counter clockwise until it is removed.

Step 5: Insert the funnel into the tank opening and add 27 US fl, oz.

(800 ml) of water. (Fig. 2) Place the funnel in the tank opening as illustrated in Fig. 1. The funnel has been specially designed to show when the water tank is full. When water starts to come out of the vent hole of the funnel, the tank is full. Remove the funnel slowly and let the remaining water in it to go inside the water tank. Do Not Overfill. Replace the Safety Cap.

Fig. 1

Fig. 2

WARNING: Allow unit to cool for 15 minutes before refilling. When refilling the steam cleaner while the boiler is still hot, there is a risk that water will squirt back during filling and cause scalding. Extreme care should be taken when refilling the unit. Use caution when opening the Safety Cap as it may become hot during use and escaping steam can cause scalding.

Step 6: Connect desired attachments onto the end of the hand grip.

Step 7: Plug the unit into a standard (120 volt, grounded) wall receptacle. Allow approximately 8-10 minutes for vapor to reach its working temperature and pressure. When the unit is ready for use, the red light will change to green. Always point nozzle outlet in a safe direction. At the start, some water will come out from the nozzle. This is normal.

NOTE: When the steam cleaner has run out of water, steam output will cease.

SC507H specifications

The Euro-Pro SC507H is a versatile and innovative steam mop designed to tackle tough dirt and stains on various floor surfaces. This powerful cleaning tool utilizes advanced steam technology, making it suitable for both quick spot cleaning and deep cleaning sessions.

One of the standout features of the SC507H is its rapid heat-up time. Within just seconds, the device is ready to produce steam, allowing for efficient cleaning without long wait times. This is particularly beneficial for busy households looking to maintain cleanliness without dedicating substantial time to cleaning chores.

Equipped with a generous water tank, the SC507H can cover a significant cleaning area before needing a refill. The tank is designed for easy filling and emptying, ensuring that users can quickly get back to cleaning after a refill. The continuous steam feature allows for uninterrupted cleaning sessions, making it ideal for tackling larger spaces or extensive cleaning tasks.

The Euro-Pro SC507H also boasts multiple steam settings, allowing users to customize the steam output according to their specific cleaning needs. From light steam for delicate surfaces to more robust steam for heavy-duty cleaning, this mop adapts to different types of flooring, including hardwood, tile, and laminate.

Additional technologies include a microfiber cleaning pad that effectively traps dirt and grime, providing a thorough clean while also being machine washable for easy maintenance. The SC507H's design also includes a swivel head that allows for easy maneuverability, enabling users to reach tight corners and under furniture without hassle.

Safety features are integrated into the design as well, with an automatic shut-off function that activates when the mop is not in use, preventing any potential hazards. The lightweight design of the SC507H makes it easy to carry and operate, reducing user fatigue during extended cleaning sessions.

In summary, the Euro-Pro SC507H is a powerful and efficient steam mop that offers a blend of advanced features and user-friendly design. With its rapid heat-up time, multiple steam settings, and ease of use, it stands out as an essential tool for maintaining a clean and hygienic home environment. Whether it's a quick clean or a deep clean, the SC507H is equipped to handle the task.