Using the Soap Injector

OPERATING INSTRUCTIONS

Note: The soap solution should only be used on surfaces that can withstand the prolonged treatment with high temperatures and moisture such as ceramic tiles or counter tops. This should not be used on materials such as carpet or wood floors because the high temperature and steam with soap can damage the surface.

VERY IMPORTANT: Use only the soap solution that has been supplied with your steam cleaner. Use of any other type of detergent soaps may damage the pump mechanism and the feed system of the injector. Regular detergent soaps SHOULD NEVER BE USED with this injector.

WARNING: KEEP SOAP

SOLUTION OUT OF THE

REACH OF CHILDREN.

CAUTION: DO NOT USE THE

SOAP SOLUTION ON ANY

FABRICS OR TEXTILES.

Attaching Soap Accessories to Adapter

Your steam cleaner comes with a variety of scrubbing pads, scrubbing sponges and a soap brush that can only be used with the soap accessory adapter.

To attach the soap brush to the accessory adapter, push it into the soap accessory adapter and turn it counter clockwise. To lock the soap brush in place, push the locking button down so that the pin of the locking button goes into one of the four (4) holes in the soap brush. (Fig. 19) To remove the soap brush, push the locking button up and turn the brush clockwise to unlock.

(Fig. 20)

Fig. 20

Follow the same procedure as above to attach the small or the large pad base to the accessory adapter. Use the small pad base when using the small scrubbing pads or sponges or the large pad base when using the larger scrubbing pads or sponges. (Fig. 21)

To fix the scrubbing pads and sponges to the pad bases, press firmly while twisting slightly. (Fig. 22)

Fig. 21

Fig. 22

Care & Maintenance of the Steam Pocket Towel

Due to the unique cleaning ability of this cloth, proper care of your microfiber towel is required to ensure long life and continued cleaning ability.

•	The first thing you should do when you get
	a new microfiber towel is to wash and dry
	it. During the manufacturing process the
	fabric has a tendency to become flat as it
	picks up contaminants from the air and
	machinery. There will also be a number of
	loose threads that, while they cause no
	harm, can be annoying the first time you
	use the towel.
•	To clean the towel, simply wash it in your
	washing machine using the warm water
	setting.
•	Always wash your towels separately from
	other fabrics. They have a tendency to
	pick up lint and other particles from other
	fabrics and the next time you use your
	towel, this lint will transfer to the surface
	being cleaned.
•	ONLY USE LIQUID DETERGENTS, never
	use dry detergents as many times the
	granules do not fully dissolve and become
	trapped in the towel. This can scratch the
	surface that you are cleaning.
•	NEVER USE BLEACH OR FABRIC
	SOFTENERS! Bleach will damage the
	microfiber fabric and fabric softeners
	deposit a coating on the microfiber fabric
	what will not allow the cloth to clean
	efficiently.
• Air dry the towel. Do not put in a clothes
	dryer as high heat will cause the towel to
	shrink and the microfibers to break down.
•	If you wash your towel on a regular basis
	and don’t let them get too dirty, they will
	last much longer. As with any fabric, dirt
	particles, grease and other contaminants

WARNING: Always insure the unit is “UNPLUGGED” from the wall receptacle prior to attaching or removing accessories.

Using Your Steam Cleaner with the Triangular Brush

To attach the triangular brush to the angle adapter, hold angle adapter in your right hand and the brush in your left. Insert the angle adapter into the triangular brush and turn 180° to lock in place. (Fig. 7 )

Fig. 7

Step 1: The triangle brush w/angle adaptor connects either directly to the handgrip or may be used with the extension tubes. To connect the extension tubes to the hand grip attach the extension tubes one onto the other and then onto the hand grip. (Fig. 8 & 9) To disconnect, reverse the operation by pressing the locking button and pulling the two sections apart.

Fig. 8

+ =

Locking	Locking	Locked
Button	Holes	Fig. 19
		Fig. 19

can cause the fibers to break down,

therefore regular cleaning will help

preserve your microfiber towels.

• As you use the microfiber towel, you will

notice that sometimes a thread will loosen

or pull out. This is normal and you should

NEVER PULL AT THE LOOSE THREAD!

Pulling the thread can cause the weave to

come undone. Instead, simply trim the

thread with a pair of sharp scissors.

Fig. 9

Euro-Pro EP923H owner manual Using the Soap Injector, Attaching Soap Accessories to Adapter