Performance and Specifications

Item	Model	Capacity at regeneration salt levels			Service Flow	Maximum	Mineral Tank		Brine Tank	Resin	Salt	Shipping
Number	Number	(kilograins as CaCO3)			Rate	Flow To Drain		Size	Size	Volume	Capacity	Weight
		@15lb/cf	@10lb/cf*	@6lb/cf	USGPM (LPM)	USGPM (LPM)	inches (mm)		inches (mm)	cu.ft. (litres)	Lbs. (kg)	Lbs. (kg)
Twin Tank Models
7600	5600MI-20	22	20	15	8.0 (30.3)	1.2 (4.5)	8 x 47 (203 x 1194)		18 x 35 (457 x 889)	0.75 (21.2)	224 (101.6)	90 (40.8)
7601	5600MI-30	30	27	20	10.0 (37.9)	1.5 (5.7)	9 x 48 (229 x 1219)		18 x 35 (457 x 889)	1.00 (28.3)	224 (101.6)	105 (47.6)
7602	5600MI-45	45	41	30	11.0 (41.6)	2.0 (7.6)	10 x 54	(254 x 1372)	21 x 36 (533 x 914)	1.50 (42.5)	308 (139.7)	140 (63.5)
7603	5600MI-60	60	55	40	15.0 (56.8)	3.0 (11.4)	12 x 52	(305 x 1321)	21 x 36 (533 x 914)	2.00 (56.6)	308 (139.7)	185 (83.9)
7604	5600MI-90	90	82	60	15.0 (56.8)	4.0 (15.1)	14 x 65	(356 x 1651)	21 x 36 (533 x 914)	3.0 (84.5)	308 (139.7)	255 (115.7)
Cabinet Models
7378	WTC5620	20	18	13	6 (22.7)	1.2 (4.5)	8 x 35	(203 x 889)	21x13x44 (533x330x1118)	0.67 (19)	359 (163)	73 (33)
7379	WTC5630	30	27	20	10 (37.9)	2.0 (7.6)	10 x 35 (254 x 889)		21x13x44 (533x330x1118)	1.00 (28)	359 (163)	90 (41)

Caution: These water conditioners are not intended to be used for treating water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Notes:	1.	“*” designates that 10 lb/cf is the factory salt setting for all units.
Operating Temperature Range: 110°F (43°C)	2.	Capacities of softeners may deviate from the chart above depending on flow rates and raw water
Operating Pressure Range: 100 psig (689 kPa)		conditions.
Electrical: Standard 110V	3. The manufacturer reserves the right to make product improvements which may deviate from the
Pipe size: 3/4””		specifications and descriptions stated herein without obligation to change previously manufactured
		products or to note the change.
	4. 1 Kilograin is equal to 1000 grains.

How Your 5600 MI-DF Water Conditioner Works

Hard water enters your home through the main supply line, enters your water conditioner, and passes down through a bed of ion exchange resin which softens and filters the water as well. An ion exchange process takes place in which the resin beads capture and hold calcium and magnesium, the hardness impurities, while the water takes on sodium ions. The soft water then flows up and into your household water line.

Your meter initiated water conditioner is set by aligning the number of people with the grains of hardness on the program wheel. See page 4.

On the days your conditioner regenerates, the resin is automatically recharged by passing a brine solution (salt water) through it. This reverses the ion exchange process, charging the resin with sodium and freeing the hardness minerals. These minerals and the brine solution are then flushed away through the drain line followed by a rapid rinse. The resin bed is again ready to soften water. The proper volume of water is returned to the brine tank to dissolve enough salt for the next regeneration. All this is performed automatically.

Installation Instructions

CAUTION:

If the ground from the electrical panel or breaker box to the water meter or underground copper pipe is tied to the copper water lines and these lines are cut during installation of the Noryl bypass valve and/or poly pipe, an approved grounding strap must be used between the two lines that have been cut in order to maintain continuity. The length of the grounding strap will depend upon the number of units being installed and/or the amount of copper pipe being replaced with poly. See Figure 1.

In all cases where metal pipe was originally used and is later interrupted by poly pipe or the Noryl bypass valve as in Figure 1 or by physical separation as in Figure 2, to maintain proper metallic pipe bonding, an approved ground clamp c/w not less than #6 copper conductor must be used for continuity.

Check your local electrical code for the correct clamp and cable size.

Figure 1

		Electrical Panel
		Ground Strap
		Copper Pipe
Ground	Poly Pipe	Poly Pipe
From	Poly Pipe	Poly Pipe
From
Panel
		Water Meter
		Softener
		c/w Plastic Bypass

Figure 2
Outside Water Line For Outside & 3rd Tap Comes From Meter
Unfiltered Water Bypass	Ground Strap Required
Loop Cut & Capped	Because of Break in Continuity
Filtered Water Line in Home

5600 specifications

The HydroSurge 5600 is a state-of-the-art water purification system designed to meet the demands of modern living while prioritizing efficiency and sustainability. This advanced device utilizes a combination of cutting-edge technologies to deliver unparalleled performance in water purification, making it an essential addition to homes and businesses alike.

One of the standout features of the HydroSurge 5600 is its multi-stage filtration system. It employs a combination of activated carbon, reverse osmosis, and UV sterilization to ensure that water is not only clean but also safe for consumption. The activated carbon filter effectively removes chlorine, sediment, and various contaminants that can affect the taste and quality of water. The reverse osmosis membrane further enhances purification by filtering out up to 99% of dissolved solids, heavy metals, and microorganisms. The UV sterilization technology then provides an added layer of protection by deactivating any remaining bacteria and viruses, guaranteeing that the water is free from harmful pathogens.

In addition to its impressive filtration capabilities, the HydroSurge 5600 is designed with user convenience in mind. It features a digital control panel that allows users to monitor the system's performance, filter life, and maintenance alerts, ensuring that the purification process remains efficient at all times. This user-friendly interface simplifies the operation and ensures even those who are not technologically inclined can easily utilize the system.

Energy efficiency is another key characteristic of the HydroSurge 5600. It is engineered to minimize water wastage, using only a fraction of the water compared to traditional filtration systems. This eco-friendly approach not only conserves resources but also reduces monthly utility bills, making it a cost-effective choice.

Moreover, the HydroSurge 5600 boasts a sleek and modern design that can seamlessly fit into any kitchen space or commercial environment. Its compact size ensures that it does not occupy too much counter space while maintaining a stylish appearance.

In summary, the HydroSurge 5600 represents the pinnacle of water purification technology. With its multi-stage filtration system, user-friendly interface, energy efficiency, and stylish design, it stands out as a reliable choice for ensuring clean and safe drinking water. Whether for home or business use, the HydroSurge 5600 promises to deliver top-notch performance and the peace of mind that comes with knowing you are consuming the highest quality water available.