HydroSurge 5600 manual

7.Make sure the bypass valve is in the service position.

8.Set the time of day and the program wheel according to the instructions on page 4.

9.Remove back cover plate. Make sure that the salt dosage is set as recommended on page 5.

NOTE: The various regeneration positions may be dialed manually by turning the large knob on the front of the control clockwise, until the indicator shows the desired position.

10.Turn the large knob to the backwash position. Turn on the water supply to the valve and wait until water starts running at the drain. Allow the water to run at the drain for 2 to 3 minutes.

11.Turn the knob advancing the valve to the brine and rinse position. Allow the water to run at the drain for a further 2 to 3 minutes. Using the same procedure, turn the knob to rapid rinse position and allow to run for a few minutes.

12.Plug the conditioner in. Manually turn the knob to the start of the brine refill position. The correct amount of water will be automatically metered through the air check tube in the brine well into the brine tank, and the control will automatically return to the service position. The service position is indicated by the word SERVICE on the front dial.

13.Replace back cover on the control module.

14.Put a minimum of 40 kg of crystal water softener salt in the brine tank. The unit will automatically fill to the correct level when it regenerates.

ALL STATE AND LOCAL GOVERNMENT CODES GOVERNING INSTALLATION OF THESE DEVICES MUST BE OBSERVED.

Optional Sanitization Procedure: We recommend that all new water conditioners be disinfected as part of the startup. Sanitization is achieved by the application of chlorine in the regeneration cycle of the conditioner. A liquid solution of 5.25% sodium hypochlorite (commonly referred to as household bleach) is recommended as a suitable disinfectant. Use only unscented products. For every cubic foot of resin in the softener, pour approximately two (2) tablespoons of sodium hypochlorite into the brine well tube. The brine tank refill in Step 12 should add the correct amount of water to the brine tank. If not, the water can be added manually now. Press and hold the EXTRA CYCLE button to begin a manual regeneration. Press the EXTRA CYCLE button again to advance the valve to the Brine/Rinse position. Allow softener to complete the Brine/Rinse cycle, then let the manual regeneration continue until the brine tank is refilled again with the correct amount of water.

5600 specifications

The HydroSurge 5600 is a state-of-the-art water purification system designed to meet the demands of modern living while prioritizing efficiency and sustainability. This advanced device utilizes a combination of cutting-edge technologies to deliver unparalleled performance in water purification, making it an essential addition to homes and businesses alike.

One of the standout features of the HydroSurge 5600 is its multi-stage filtration system. It employs a combination of activated carbon, reverse osmosis, and UV sterilization to ensure that water is not only clean but also safe for consumption. The activated carbon filter effectively removes chlorine, sediment, and various contaminants that can affect the taste and quality of water. The reverse osmosis membrane further enhances purification by filtering out up to 99% of dissolved solids, heavy metals, and microorganisms. The UV sterilization technology then provides an added layer of protection by deactivating any remaining bacteria and viruses, guaranteeing that the water is free from harmful pathogens.

In addition to its impressive filtration capabilities, the HydroSurge 5600 is designed with user convenience in mind. It features a digital control panel that allows users to monitor the system's performance, filter life, and maintenance alerts, ensuring that the purification process remains efficient at all times. This user-friendly interface simplifies the operation and ensures even those who are not technologically inclined can easily utilize the system.

Energy efficiency is another key characteristic of the HydroSurge 5600. It is engineered to minimize water wastage, using only a fraction of the water compared to traditional filtration systems. This eco-friendly approach not only conserves resources but also reduces monthly utility bills, making it a cost-effective choice.

Moreover, the HydroSurge 5600 boasts a sleek and modern design that can seamlessly fit into any kitchen space or commercial environment. Its compact size ensures that it does not occupy too much counter space while maintaining a stylish appearance.

In summary, the HydroSurge 5600 represents the pinnacle of water purification technology. With its multi-stage filtration system, user-friendly interface, energy efficiency, and stylish design, it stands out as a reliable choice for ensuring clean and safe drinking water. Whether for home or business use, the HydroSurge 5600 promises to deliver top-notch performance and the peace of mind that comes with knowing you are consuming the highest quality water available.