TROUBLE SHOOTING
OBSERVED | POSSIBLE |
|
| |
PROBLEM | CAUSE | SOLUTION | ||
|
|
|
| |
Igniter button is pressed, no 1. | Igniter electrode positioned | 1. | Replace igniter | |
spark at ODS/Pilot |
| incorrectly |
|
|
| 2. | Igniter electrode broken | 2. | Replace igniter |
| 3. | Igniter electrode not | 3. | Reconnect igniter cable |
|
| connected to igniter cable |
|
|
| 4. | Igniter cable pinched or wet | 4. | Free igniter cable if pinched |
|
|
|
| by any metal or tubing. Keep |
|
|
|
| igniter cable dry. |
| 5. | Piezo igniter nut is loose | 5. | Tighten nut holding piezo |
|
|
|
| igniter to heater cabinet. Nut |
|
|
|
| is located inside heater |
|
|
|
| cabinet at top. |
| 6. | Broken igniter cable | 6. | Replace igniter cable |
| 7. | Bad piezo igniter | 7. | Replace piezo igniter |
OBSERVED | POSSIBLE |
|
| |
PROBLEM | CAUSE | SOLUTION | ||
Igniter button is pressed | 1. | Gas supply turned off or | 1. | Turn on gas supply or open |
Spark at ODS/Pilot |
| manual shutoff valve is |
| manual shutoff valve |
No Ignition |
| closed |
|
|
| 2. | Control knob not in “PILOT” | 2. | Turn control knob to “PILOT” |
|
| position |
| position |
| 3. | Control knob not pressed in | 3. | Press in control knob while in |
|
| while in “PILOT” position |
| “PILOT” position. |
Page 33
