WIRING DIAGRAM
MOTOR JUMPERTHERMOSTAT
JUMPER
GREEN
JUMPER
WHITE
BLACK
RHEOSTAT
POWER CORD
BLACK 
Figure 15
NOTE: If any of the original wire as supplied with the gas appliance must be replaced, it must be replaced with type 16ga., 105o C. rating wire or its equivalent.
NOTE: The blower assembly is standard for this appliance, and is installed by the manufacture.Installation and repair should be done by a qualified service person. This heater should be inspected before use and at least annually by a qualified service technician. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments and circulating air passageways of the heater be kept clean.
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.
Verify proper operation after servicing.
Page 30
