HydroSurge 5600 operation manual Salt Settings are factory set and should not need adjustment

Page 7

Salt Settings are factory set and should not need adjustment

5600MI-20

................................8 lbs

WTC5620

7 lbs

5600MI-30

..............................10 lbs

WTC5630

10 lbs

5600MI-45

..............................15 lbs

5600MI-60

..............................10 lbs

5600MI-90

..............................15 lbs

Automatic Bypass

The regeneration cycle lasts approximately 2-1/2 hours, after which soft water service will be restored. During regeneration, hard water is automatically bypassed for use in the household. Hot water should be used as little as possible during this time to prevent hard water from filling the water heater. This is why automatic regeneration is set for sometime during the night and manual regenerations should be performed when little or no water will be used in the household.

Safety Float

The brine tank is equipped with a safety float which prevents your brine tank from overfilling as a result of a malfunction such as a power failure.

Water Pressure

Your softener is designed to operate under normal water pressures from 20 psi (1.4 atm) to 120 psi (8.2 atm).

New Sounds

You may notice new sounds as your water softener operates. The regeneration cycle lasts approximately 2-1/2 hours. During this time, you may hear water running intermittently to the drain.

Manual Bypass (Figure 6)

In the case of emergency, such as an overflowing brine tank, you can isolate your water softener from the water supply using the bypass valve located at the back of the control.

In normal operation the bypass is open with the on/off knobs in line with the inlet and outlet pipes. To isolate the softener, simply rotate the knobs clockwise (as indicated by the word BYPASS and arrow) until they lock.

You can use your water related fixtures and appliances as the water supply is bypassing the softener. However, the water you use will be hard.

To resume soft water service, open bypass valve by rotating the knobs counter- clockwise.

Figure 6

OUTLET

INLET

5

Image 7
Contents 5600 Meter Initiated Valve Page Installation Instructions Performance and SpecificationsHow Your 5600 MI-DF Water Conditioner Works Outlet Page Operating Instructions Setting the Time of Day FigureSalt Settings are factory set and should not need adjustment Maintenance Problem Cause Correction Trouble Shooting GuidePage Guarantee

5600 specifications

The HydroSurge 5600 is a state-of-the-art water purification system designed to meet the demands of modern living while prioritizing efficiency and sustainability. This advanced device utilizes a combination of cutting-edge technologies to deliver unparalleled performance in water purification, making it an essential addition to homes and businesses alike.

One of the standout features of the HydroSurge 5600 is its multi-stage filtration system. It employs a combination of activated carbon, reverse osmosis, and UV sterilization to ensure that water is not only clean but also safe for consumption. The activated carbon filter effectively removes chlorine, sediment, and various contaminants that can affect the taste and quality of water. The reverse osmosis membrane further enhances purification by filtering out up to 99% of dissolved solids, heavy metals, and microorganisms. The UV sterilization technology then provides an added layer of protection by deactivating any remaining bacteria and viruses, guaranteeing that the water is free from harmful pathogens.

In addition to its impressive filtration capabilities, the HydroSurge 5600 is designed with user convenience in mind. It features a digital control panel that allows users to monitor the system's performance, filter life, and maintenance alerts, ensuring that the purification process remains efficient at all times. This user-friendly interface simplifies the operation and ensures even those who are not technologically inclined can easily utilize the system.

Energy efficiency is another key characteristic of the HydroSurge 5600. It is engineered to minimize water wastage, using only a fraction of the water compared to traditional filtration systems. This eco-friendly approach not only conserves resources but also reduces monthly utility bills, making it a cost-effective choice.

Moreover, the HydroSurge 5600 boasts a sleek and modern design that can seamlessly fit into any kitchen space or commercial environment. Its compact size ensures that it does not occupy too much counter space while maintaining a stylish appearance.

In summary, the HydroSurge 5600 represents the pinnacle of water purification technology. With its multi-stage filtration system, user-friendly interface, energy efficiency, and stylish design, it stands out as a reliable choice for ensuring clean and safe drinking water. Whether for home or business use, the HydroSurge 5600 promises to deliver top-notch performance and the peace of mind that comes with knowing you are consuming the highest quality water available.