Unpacking And Inspection, System Assembly

NOTES:

•Please read this manual prior to installing and operating the system.

•Incoming water supplies that do not meet these requirements may need additional pre-treatment prior to the system. System performance may be affected if requirements are not met, including system output production and cartridge change-out frequency.

•Consult with your local building inspector for approval and required permits to install this system. Additional equipment, such as back-flow prevention devices, seismic restraint equipment, air gaps, etc., may be required. Completed installation must meet all local and national codes.

Do not connect the ENVI-RO™ system after any water filtration system, unless specifically provided or specified for use with the ENVI-RO™ system.

Unpacking And Inspection

The ENVI-RO™ includes all the necessary fittings for installation. Lengths of 3/8" tubing have been provided for connecting to the wastewater/drain connection. Supply lines and distribution piping/ tubing are not included.

The ENVI-RO™ system is packaged as a complete unit in one carton. At a minimum, you should have the following:

1.Plate mounted processor assembly including:

•Dual-head Pump

•Cartridge Heads

•Controller & Power Supply

•Storage Tank

2.Wall Mount Bracket

3.MR-600 RO cartridge

4.2SR-BW Cartridge

5.Parts Kit

Inspect the carton for damage. Report any damage to freight carrier immediately and retain all packaging materials. Carefully unpack and inspect each item.

System Assembly

Locate the system in an area that is convenient to the inlet water supply and drain facilities, with access for routing the product water tubing/piping to the equipment. Install in a dry location, away from all forms of corrosive and/or flammable materials. Consider ease

of access for servicing when selecting a location. Evaluate the mounting surface for its ability to properly support the weight of the processor when in operation (Approximately 90 pounds).

WARNING Do not use screws smaller than #12 for mounting the processor.

WARNING Mounting surface may require reinforcement to support processor safely. Hollow walls, drywall and other non-structural surfaces are not suitable unless reinforced.

Processor Assembly Mounting

1.The ENVI-RO system has been provided with a wall mount bracket to allow greater installation flexibility and ease of processor placement. If the wall mount bracket is not suitable for this specific application, the processor backplate has 4 mounting holes (2 keyhole slots, 2 standard) on 16" centers for securing it directly to a vertical surface.

2.Refer to Figure 7 (page 13) for dimensional information. Use this as your guide to determine the wall mount bracket and/or processor location. If NOT installing the wall mount bracket go to step 5.

continued on the next page . . .

Figure 1. Wall mount bracket.

Position top line of mounting holes 1-9/16” above the top edge of backplate

			20.0	508
			17.8	452
			16.6	422
			15.4	391
			14.2	361
		3.1	80	4.2	107	5.0	127
16X	.33	8.4	THRU

Figure 2. ENVI-RO Assembly.

	Inlet		Low TDS	Reduced TDS
(From Filter System)			Low TDS	Reduced TDS
(From Filter System)			Outlet	Outlet
			Outlet	Outlet
			(Steamer)	(Coee)
			ENVI-RO
			System
					RO Reject
2SR-BW			MR-600		(3/8" John
Conditioning			MR-600		Guest) route
Conditioning			RO Cartridge		Guest) route
Cartridge			RO Cartridge		to drain
Cartridge					to drain
		Floor Drain
		Maintain air-gap per local and national codes

ENVI-RO specifications

The Everpure ENVI-RO is a revolutionary reverse osmosis water filtration system designed to deliver high-quality drinking water while ensuring exceptional taste, safety, and convenience. Ideal for residential settings, this advanced system employs cutting-edge technology to remove impurities, contaminants, and unwanted minerals, providing users with clean and refreshing water.

One of the standout features of the ENVI-RO is its multi-stage filtration process, which includes a pre-filter, reverse osmosis membrane, and post-filter. The pre-filter effectively captures larger particles and sediments, prolonging the life of the subsequent filters. The heart of the system, the reverse osmosis membrane, boasts a high rejection rate for a wide range of contaminants, such as chlorine, lead, fluoride, and nitrates, resulting in water that is not only pure but also tastes fantastic.

The post-filter further enhances the quality of the water by removing any remaining odors and tastes, ensuring that each drop is crisp and clean. The ENVI-RO system also features an integrated water storage tank that provides ample supply, delivering filtered water on demand. The tank is designed to minimize space, making it an ideal choice for kitchens with limited under-sink areas.

Another notable characteristic of the Everpure ENVI-RO is its ease of installation and maintenance. Designed with user-friendliness in mind, the system can be installed without the need for professional assistance, allowing homeowners to enjoy high-quality water quickly and efficiently. The filters are easily replaceable, and the system includes a convenient indicator light that alerts users when it’s time for a filter change, ensuring optimal performance at all times.

Durability and reliability are also key components of the ENVI-RO design. The system features high-quality materials that ensure long-lasting performance, coupled with a design that minimizes wastewater during the filtration process, making it an environmentally friendly choice.

Whether for cooking, drinking, or preparing beverages, the Everpure ENVI-RO provides a superior solution for families seeking the best in water quality. With its innovative technologies and user-centric features, the ENVI-RO system stands as a testament to Everpure's commitment to delivering clean, delicious water that enhances everyday living.