Harman-Kardon AVR 155 owner manual Main Remote Control Functions

Page 12

Main Remote Control Functions

Memory Button: Press this button to enter a radio station into the AVR ’s preset memory. Two underline indicators will flash at the right side of the Main Information Display Ò, you then have five seconds to enter a preset memory location using the Numeric Keys H. (See page 41 for more information).

Delay/Prev Ch.: Press this button to begin the process for setting the delay times used by the AVR when processing surround sound. After pressing this button, the delay times are entered by pressing the OK button F and then using the ⁄/¤ buttons D to change the setting. Press the OK button again to complete the process. (See page 26 for more information).

›Button: Press this button to change a setting or selection when configuring many of the AVR’s settings.

Speaker Select: Press this button to begin the process of configuring the AVR’s Bass Management System for use with the type of speakers used in your system. Once the button has been pressed, use the ⁄/¤ buttons D to select the channel you wish to set up.

Press the OK Button F and then select the speaker type (Large, Small or None) appropriate with the speaker in use. (See page 24 for more information).

Mute: Press this button to momentarily silence the AVR or TV set being controlled, depending on which device has been selected. When the AVR remote is being programmed to operate another device, this button is pressed with the Input Selector button 4 to begin the programming process. (See page 43 for more information on programming the remote).

Volume Up/Down: Press these buttons to raise or lower the system volume.

TV/Video Button: This button does not have a direct function on the AVR, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video” function, pressing this button will switch between the output of the player or receiver and the external video input to that player. Consult the Owner’s Manual for your specific player or receiver for the details of how it implements this function.

NOTE: With the press of any remote button the Input Selector button 45 associated with the button pressed will briefly flash red to confirm the transmission of the command, as long as there is a function for that button with the device selected (see function list on pages 46-47).

Dim Button: Press this button to activate the Dimmer function, which reduces the brightness of the front-panel display, or turns it off entirely. The first press of the button shows the default state. Press the button again to change the display to reduce the brightness by 50%, and press it again within five seconds and the main display will go completely dark. Note that this setting is temporary; regardless of any changes, the display will always return to full brightness when the AVR is turned on. The white illumination inside the Volume Control Button is lit only when the front-panel display is on full brightness. If you press a button while the dis- play is dark, it will light up for some seconds to inform you that your signal has been received. Also the Volume Control light will light up, then go dark again some seconds later.

12MAIN REMOTE CONTROL FUNCTIONS

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AVR 155 Audio/VideoReceiver Table of Contents Declaration of ConformityDescription and Features IntroductionFront panel analog A/V inputs Safety Information Important Safety InformationUnpacking Headphone Jack $ Speaker/Channel Input Indicator Front Panel Controls‹ Stereo Modes ‹ Logic 7 Modes # Preset Stations Selector Press this See page 35 for more information on the Channel IndicatorsRear Panel Connections Main Power Switch Main Remote Control Functions See page 23-24 for more information Between these two options with the Up/Down button n Main Remote Control Functions Installation and Connections Audio Equipment ConnectionsVideo Equipment Connections Connect the analog output of a CD player to the CD inputsHdmi Connections Scart A/V ConnectionsImportant Note for Adapter Cables Important Notes for S-Video connectionsImportant Note for the Use SCART-Cinch AdaptersSpeaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnInput Setup Source Input Default Digital Audio Input› Navigation Button CoaxSurround Setup Setting to your tasteNight Mode Settings ‹/› Navigation Buttons EConfiguring the Surround Off Stereo Modes Automated Speaker Setup Using EzSet/EQStereo-Direct Bypass Mode Stereo-Digital ModeSystem Configuration So that the on-screen cursor is pointing to OK Button FManual Setup Speaker SetupWith any movie input source ‹/› Navigation Buttons E toSubwoofer ‹/› Navigation Buttons E to choose the appropriate setting Delay Settings ¤ Button D once to move to the next line‹ / › Navigation Button E to enter Output Level Adjustment Is then pressed to select OFF in the highlighted video Until the word OFF appears to stop the test toneVolume until you can hear the test noise clearly Surround Mode Chart OperationMaximum bass impact Dolby 3 Stereo ReferenceWide Main speakers and a subwooferControls and Use of Headphones Basic OperationSource Selection Channel Direct InputSurround Mode Selection Digital Audio PlaybackRepeatedly to scroll through the list of available modes Dolby DigitalSurround Mode Types Digital Bitstream IndicatorsPCM Audio Playback Selecting a Digital SourceSpeaker/Channel Indicators PCM Playback IndicationsSee Figure Incoming Bitstream Available Surround ModesNight Mode Incoming Signal Available Surround ModesDTS, DTS Stereo DSP Surround OffOutput Level Adjustment With Source Signals To the Channel Reset line and pressTape Recording To change the output levelMemory Backup Dim FunctionButton as needed until the displays are on System Setup Turn On Volume LevelSemi-OSD Settings Front-Panel-Display FadeFull-OSD Time Out Adjustment Default Surround ModeFull-OSD Background Color To exit the menu systemTuner Operation Basic Tuner OperationRDS Tuning RDS OperationRDS Display Options Program Search PTYProgramming the Remote Programming the Remote with CodesCode Readout Direct Code EntryVolume Punch-Through Macro ProgrammingProgrammed Device Functions Resetting the Remote Memory Channel Control Punch-ThroughFunction List VID 1 VCRAVR DVD Troubleshooting Guide Processor ResetPower Switch 2 is pushed Remote sensor Ú is obscuredTechnical Specifications Appendix Settings Worksheet Table A4 Source Input Settings Center Speaker SizeHarman Consumer Group, Inc
Related manuals
Manual 52 pages 9.23 Kb

AVR 155 specifications

The Harman-Kardon AVR 155 is a compact yet powerful AV receiver designed to enhance your home entertainment experience. Renowned for its exceptional audio quality and user-friendly interface, the AVR 155 caters to both casual listeners and audiophiles alike.

One of the key features of the AVR 155 is its ability to deliver robust multi-channel audio. It comes equipped with a 5.1 channel setup, allowing you to immerse yourself in surround sound while enjoying movies, music, or gaming. With a total power output of 375 watts, the AVR 155 can drive a variety of speakers efficiently, ensuring clear, dynamic sound reproduction across frequencies.

The AVR 155 also supports high-definition audio formats. It is compatible with Dolby TrueHD and DTS-HD Master Audio, allowing for a rich listening experience that takes full advantage of modern soundtracks. This support for high-resolution audio formats highlights Harman-Kardon's commitment to quality and performance.

In addition to its audio capabilities, the AVR 155 features multiple HDMI inputs, enabling you to easily connect various media devices such as Blu-ray players, gaming consoles, and streaming devices. It is equipped with HDMI 1.4, which supports 3D playback and allows for 4K pass-through, making it a future-proof choice for your home theater system.

Another standout feature is the built-in proprietary Harman GreenEdge technology, which focuses on energy efficiency while maintaining performance. This not only minimizes power consumption but also contributes to a more sustainable home environment.

The AVR 155 boasts an intuitive on-screen display through its user interface, making navigation of settings and options straightforward. With options to customize sound settings, including bass management and room correction, users have complete control over their listening environment.

With its sleek design, the Harman-Kardon AVR 155 seamlessly blends into any home theater setup. The combination of solid build quality and advanced technologies positions it as a great choice for anyone looking to elevate their audio experience without sacrificing space or style.

Overall, the Harman-Kardon AVR 155 stands out for its high-quality sound performance, multiple connectivity options, and energy efficiency, making it an excellent choice for modern home entertainment enthusiasts.
Top Page Image Contents