Harman-Kardon AVR 155 System Configuration, First Turn On, Using the On-Screen Display, Display Ò

Page 17

System Configuration

Once the speakers have been placed in the room and connected, the remaining steps are to program the system configuration memories.

Although it is necessary to assign input/output settings and surround mode choices manually, we recommend that you take advantage of the power and precision of EzSet/EQ to automatically select and enter the settings for all other audio parameters. This will not only save you time; it will ensure that your room is calibrated and equalized with an accuracy not possible when these settings are made manually. You are now ready to power up the AVR 155 to begin these final adjustments.

First Turn On

You are now ready to power up the AVR to begin these final adjustments.

1.Plug the Power Cable ￿ into an unswitched AC outlet.

2. Press the Main Power Switch on the rear of the receiver ON. Note that the Power Indicator 3 will turn amber, indicating that the unit is in the Standby mode.

3.Remove the protective plastic film from the main front-panel. If left in place, the film may affect the performance of your remote control.

4.Install the three supplied AAA batteries in the remote as shown. Be certain to follow the (+) and (–) polarity indicators that are on the top of the battery compartment.

5.Turn the AVR on either by pressing the System Power Control 2 or the Input Source Selector % on the front panel, or via the remote by pressing the Power On Button 3, AVR Selector 5 or any of the Input Selectors 46 on the remote. The Power Indicator 3 will turn white to confirm that the unit is on, and the Main Information Display Ò will also light up.

NOTE: After pressing one of the Input Selector buttons 4 to turn the unit on, press the AVR Selector 5 to have the remote control the AVR functions.

Using the On-Screen Display

When making the following adjustments, you may find them easier to make via the unit’s on- screen display system. These easy-to-read displays give you a clear picture of the current status of the unit and facilitate speaker, delay, input or digital selection you are making.

To view the on-screen displays, make certain you have made a connection from the Video Monitor Out jack ￿ on the rear panel to the composite or S-Video input of your TV or projector. In order to view the AVR’s displays, the correct video input must be selected on your video display. Note that the on-screen menus are not available when a component video display is in use.

NOTE: The AVR 155 will not convert other types of video to HDMI, and you will not be able to view the on-screen displays using the HDMI con- nection.

IMPORTANT NOTE: When viewing the on-screen menus using a CRT-based projector, plasma display or any direct-view CRT monitor or television, it is important that they not be left on the screen for an extended period of time. As with any video display, but particularly with projectors, constant display of a static image such as these menus or video game images may cause the image to be permanently “burned into” the CRT. This type of damage is not covered by the AVR warranty and may not be covered by the projector TV set’s warranty.

The AVR has two on-screen display modes, “Semi-OSD” and “Full-OSD.” When making configuration adjustments, it is recommended that the Full-OSD mode be used. This will place a complete status report or option listing on the screen, making it easier to view the available options and make the settings on the screen. The Semi-OSD mode uses one-line displays only.

Note that when the full OSD system is in use, the menu selections are not shown in the Infor- mation Display Ò. When the full OSD menu system is used, OSD ON will appear in the Main Information Display Ò to remind you that a video display must be used.

When the semi-OSD system is used in conjunc- tion with the discrete configuration buttons, the on screen display will show a single line of text with the current menu selection. That selection will also be shown in the Main Information

Display Ò.

The full OSD system can always be turned on or off by pressing the OSD button L. When this button is pressed the MASTER MENU (Figure 1) will appear, and adjustments are made from the individual menus. Note that the menus will remain on the screen for 20 seconds after the latest action was made on the screen menu, then they will “time-out” and disappear from the screen. The time-out may be increased to as

much as 50 seconds by going to the SYSTEM SETUP menu, and changing the item titled

FULL OSD TIME OUT.

The semi-OSD system is also available as a system default, although it may be turned off by using the SYSTEM SETUP menu. (See page 39). With the semi-OSD system, you may make adjustments directly, by pressing the buttons on the front panel or remote control for the specific parameter to be adjusted. For example, to change the digital input for any of the sources, press the Digital Select Button ÛG and then any of the Selector buttons ‹ / › 7 or ⁄/¤ D on the front panel or remote.

Figure 1

System Setup

The AVR 155 features an advanced memory system that enables you to establish different configurations for the speaker configuration, digital input, surround mode, delay times, crossover frequencies and speaker setting for each input source. To ease the speaker setting, the same speaker setting can also be made for all inputs. This flexibility enables you to custom tailor the way in which you listen to each source and have the AVR memorize them. This means, for example, that you may associate different surround modes and analog or digital inputs with different sources, or set different speaker configu- rations with the resultant changes to the bass management system or the use of the center speaker and/or the Subwoofer. Once these settings are made, they will automatically be recalled whenever you select that input.

However, we recommend that the first time you use the AVR, you take advantage of the simplicity of configuring the system using the EzSet/EQ process, which takes the guesswork out of speak- er size and delay settings, and balances the speaker output levels to tailor the AVR’s sound presentation to your specific system and room. Before beginning the EzSet/EQ procedure, there are a few adjustments that need to be made to ensure accurate results.

The factory default settings for the AVR 155 have all inputs configured for an analog audio input except for the DVD input, where the Coaxial Digital Input ￿ is the default and the Video 2 input, where the Optical Digital Audio Input

￿is the default. Once the DSP processing sys- tem is used for the first time for any input, the

ENGLISH

SYSTEM CONFIGURATION 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR 155 Audio/VideoReceiver Declaration of Conformity Table of ContentsFront panel analog A/V inputs Description and FeaturesIntroduction Unpacking Safety InformationImportant Safety Information ‹ Stereo Modes ‹ Logic 7 Modes Headphone Jack $ Speaker/Channel Input IndicatorFront Panel Controls See page 35 for more information on the Channel Indicators # Preset Stations Selector Press thisRear Panel Connections Main Power Switch Main Remote Control Functions See page 23-24 for more information Between these two options with the Up/Down button n Main Remote Control Functions Audio Equipment Connections Installation and ConnectionsVideo Equipment Connections Connect the analog output of a CD player to the CD inputsScart A/V Connections Hdmi ConnectionsImportant Notes for S-Video connections Important Note for Adapter CablesImportant Note for the Use SCART-Cinch AdaptersSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnSource Input Default Digital Audio Input Input Setup› Navigation Button CoaxSetting to your taste Surround SetupNight Mode Settings ‹/› Navigation Buttons EAutomated Speaker Setup Using EzSet/EQ Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeSystem Configuration OK Button F So that the on-screen cursor is pointing toSpeaker Setup Manual SetupWith any movie input source ‹/› Navigation Buttons E toSubwoofer ‹/› Navigation Buttons E to choose the appropriate setting ‹ / › Navigation Button E to enter Delay Settings¤ Button D once to move to the next line Output Level Adjustment Until the word OFF appears to stop the test tone Is then pressed to select OFF in the highlighted videoVolume until you can hear the test noise clearly Maximum bass impact Surround Mode ChartOperation Reference Dolby 3 StereoWide Main speakers and a subwooferBasic Operation Controls and Use of HeadphonesSource Selection Channel Direct InputDigital Audio Playback Surround Mode SelectionRepeatedly to scroll through the list of available modes Dolby DigitalDigital Bitstream Indicators Surround Mode TypesPCM Audio Playback Selecting a Digital SourcePCM Playback Indications Speaker/Channel IndicatorsSee Figure Incoming Bitstream Available Surround ModesIncoming Signal Available Surround Modes Night ModeDTS, DTS Stereo DSP Surround OffTo the Channel Reset line and press Output Level Adjustment With Source SignalsTape Recording To change the output levelButton as needed until the displays are on Memory BackupDim Function Turn On Volume Level System SetupSemi-OSD Settings Front-Panel-Display FadeDefault Surround Mode Full-OSD Time Out AdjustmentFull-OSD Background Color To exit the menu systemBasic Tuner Operation Tuner OperationRDS Operation RDS TuningRDS Display Options Program Search PTYProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryProgrammed Device Functions Volume Punch-ThroughMacro Programming Channel Control Punch-Through Resetting the Remote MemoryVID 1 VCR Function ListAVR DVD Processor Reset Troubleshooting GuidePower Switch 2 is pushed Remote sensor Ú is obscuredTechnical Specifications Appendix Settings Worksheet Center Speaker Size Table A4 Source Input SettingsHarman Consumer Group, Inc
Related manuals
Manual 52 pages 9.23 Kb

AVR 155 specifications

The Harman-Kardon AVR 155 is a compact yet powerful AV receiver designed to enhance your home entertainment experience. Renowned for its exceptional audio quality and user-friendly interface, the AVR 155 caters to both casual listeners and audiophiles alike.

One of the key features of the AVR 155 is its ability to deliver robust multi-channel audio. It comes equipped with a 5.1 channel setup, allowing you to immerse yourself in surround sound while enjoying movies, music, or gaming. With a total power output of 375 watts, the AVR 155 can drive a variety of speakers efficiently, ensuring clear, dynamic sound reproduction across frequencies.

The AVR 155 also supports high-definition audio formats. It is compatible with Dolby TrueHD and DTS-HD Master Audio, allowing for a rich listening experience that takes full advantage of modern soundtracks. This support for high-resolution audio formats highlights Harman-Kardon's commitment to quality and performance.

In addition to its audio capabilities, the AVR 155 features multiple HDMI inputs, enabling you to easily connect various media devices such as Blu-ray players, gaming consoles, and streaming devices. It is equipped with HDMI 1.4, which supports 3D playback and allows for 4K pass-through, making it a future-proof choice for your home theater system.

Another standout feature is the built-in proprietary Harman GreenEdge technology, which focuses on energy efficiency while maintaining performance. This not only minimizes power consumption but also contributes to a more sustainable home environment.

The AVR 155 boasts an intuitive on-screen display through its user interface, making navigation of settings and options straightforward. With options to customize sound settings, including bass management and room correction, users have complete control over their listening environment.

With its sleek design, the Harman-Kardon AVR 155 seamlessly blends into any home theater setup. The combination of solid build quality and advanced technologies positions it as a great choice for anyone looking to elevate their audio experience without sacrificing space or style.

Overall, the Harman-Kardon AVR 155 stands out for its high-quality sound performance, multiple connectivity options, and energy efficiency, making it an excellent choice for modern home entertainment enthusiasts.
Top Page Image Contents