Harman-Kardon AVR 147 System Configuration, First Turn On, Using the On-Screen Display, Display Ò

Page 17

System Configuration

Once the speakers have been placed in the room and connected, the remaining steps are to program the system configuration memories.

Although it is necessary to assign input/output settings and surround mode choices manually, we recommend that you take advantage of the power and precision of EzSet/EQ to automatically select and enter the settings for all other audio parameters. This will not only save you time; it will ensure that your room is calibrated and equalized with an accuracy not possible when these settings are made manually. You are now ready to power up the AVR 147 to begin these final adjustments.

First Turn On

You are now ready to power up the AVR to begin these final adjustments.

1.Plug the Power Cable ￿ into an unswitched AC outlet.

2.Press the Main Power Switch 1 in until it latches and the word “OFF” on the top of the switch disappears inside the front panel. Note that the Power Indicator 3 will turn orange, indicating that the unit is in the Standby mode.

3.Remove the protective plastic film from the main front-panel lens. If left in place, the film may affect the performance of your remote control.

4.Install the three supplied AAA batteries in the remote as shown. Be certain to follow the (+) and (–) polarity indicators that are on the top of the battery compartment.

5.Turn the AVR on either by pressing the System Power Control 2 or the Input Source Selector % on the front panel, or via the remote by pressing the Power On Button 3, AVR Selector 5 or any of the Input Selectors 46 on the remote. The Power Indicator 3 will turn blue to confirm that the unit is on, and the Main Information Display Ò will also light up.

NOTE: After pressing one of the Input Selector buttons 4 to turn the unit on, press the AVR Selector 5 to have the remote control the AVR functions.

Using the On-Screen Display

When making the following adjustments, you may find them easier to make via the unit’s on- screen display system. These easy-to-read displays give you a clear picture of the current status of the unit and facilitate speaker, delay, input or digital selection you are making.

To view the on-screen displays, make certain you have made a connection from the Video Monitor Out jack ￿ on the rear panel to the composite or S-Video input of your TV or projector. In order to view the AVR’s displays, the correct video input must be selected on your video display. Note that the on-screen menus are not available when a component video display is in use.

NOTE: The AVR 147 will not convert other types of video to HDMI, and you will not be able to view the on-screen displays using the HDMI con- nection.

IMPORTANT NOTE: When viewing the on-screen menus using a CRT-based projector, plasma display or any direct-view CRT monitor or television, it is important that they not be left on the screen for an extended period of time. As with any video display, but particularly with projectors, constant display of a static image such as these menus or video game images may cause the image to be permanently “burned into” the CRT. This type of damage is not covered by the AVR warranty and may not be covered by the projector TV set’s warranty.

The AVR has two on-screen display modes, “Semi-OSD” and “Full-OSD.” When making configuration adjustments, it is recommended that the Full-OSD mode be used. This will place a complete status report or option listing on the screen, making it easier to view the available options and make the settings on the screen. The Semi-OSD mode uses one-line displays only.

Note that when the full OSD system is in use, the menu selections are not shown in the Infor- mation Display Ò. When the full OSD menu system is used, OSD ON will appear in the Main Information Display Ò to remind you that a video display must be used.

When the semi-OSD system is used in conjunc- tion with the discrete configuration buttons, the on screen display will show a single line of text with the current menu selection. That selection will also be shown in the Main Information

Display Ò.

The full OSD system can always be turned on or off by pressing the OSD button L. When this button is pressed the MASTER MENU (Figure 1) will appear, and adjustments are made from the individual menus. Note that the menus will remain on the screen for 20 seconds after the latest action was made on the screen menu, then they will “time-out” and disappear from the screen. The time-out may be increased to as

much as 50 seconds by going to the SYSTEM SETUP menu, and changing the item titled

FULL OSD TIME OUT.

The semi-OSD system is also available as a system default, although it may be turned off by using the SYSTEM SETUP menu. (See page 39). With the semi-OSD system, you may make adjustments directly, by pressing the buttons on the front panel or remote control for the specific parameter to be adjusted. For example, to change the digital input for any of the sources, press the Digital Select Button ÛG and then any of the Selector buttons ‹ / › 7 or ⁄/¤ D on the front panel or remote.

Figure 1

System Setup

The AVR 147 features an advanced memory system that enables you to establish different configurations for the speaker configuration, digital input, surround mode, delay times, crossover frequencies and speaker setting for each input source. To ease the speaker setting, the same speaker setting can also be made for all inputs. This flexibility enables you to custom tailor the way in which you listen to each source and have the AVR memorize them. This means, for example, that you may associate different surround modes and analog or digital inputs with different sources, or set different speaker configu- rations with the resultant changes to the bass management system or the use of the center speaker and/or the Subwoofer. Once these settings are made, they will automatically be recalled whenever you select that input.

However, we recommend that the first time you use the AVR, you take advantage of the simplicity of configuring the system using the EzSet/EQ process, which takes the guesswork out of speak- er size and delay settings, and balances the speaker output levels to tailor the AVR’s sound presentation to your specific system and room. Before beginning the EzSet/EQ procedure, there are a few adjustments that need to be made to ensure accurate results.

The factory default settings for the AVR 147 have all inputs configured for an analog audio input except for the DVD input, where the Coaxial Digital Input ￿ is the default and the Video 2 input, where the Optical Digital Audio Input

￿is the default. Once the DSP processing sys- tem is used for the first time for any input, the

SYSTEM CONFIGURATION 17

ENGLISH

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR 147 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesFive channels of high-current amplification Front panel analog A/V inputsUnpacking Safety InformationImportant Safety Information Front Panel Controls Headphone Jack $ Speaker/Channel Input IndicatorDigital Input Selector When playing a # Preset Stations Selector Press thisSee page 35 for more information on the Channel Indicators Rear Panel Connections Rear Panel Connections Main Remote Control Functions See page 23-24 for more information Main Remote Control Functions Main Remote Control Functions Audio Equipment Connections Installation and ConnectionsVideo Equipment Connections Connect the analog output of a CD player to the CD inputsScart A/V Connections Hdmi ConnectionsAC Power Connections Power ConnectionsImportant Note for Adapter Cables Important Notes for S-Video connectionsSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnSource Input Default Digital Audio Input Input Setup› Navigation Button CoaxSurround Setup Night Mode Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode ‹/› Navigation Buttons ETo take advantage of this feature, press Automated Speaker Setup Using EzSet/EQStereo-Digital Mode System Configuration Set Button F Manual SetupSpeaker Setup System Configuration Subwoofer ¤ Button D once to move to the next line ‹/› Navigation Buttons E to choose the appropriate settingDelay Settings ‹ / › Navigation Button E to enter Output Level AdjustmentWhen all channels have the same output level Volume until you can hear the test noise clearlyIs then pressed to select OFF in the highlighted video Until the word OFF appears to stop the test toneSystem Configuration Maximum bass impact Surround Mode ChartOperation Reference Dolby 3 StereoWide Main speakers and a subwooferBasic Operation Controls and Use of HeadphonesSource Selection Channel Direct InputDigital Audio Playback Surround Mode SelectionRepeatedly to scroll through the list of available modes Until Surr OFF appears in the Main Information Display ÒDigital Bitstream Indicators Surround Mode TypesPCM Audio Playback Selecting a Digital SourcePCM Playback Indications Speaker/Channel IndicatorsSee Figure Incoming BitstreamIncoming Bitstream Available Surround Modes Night ModeIncoming Signal Available Surround Modes Tape Recording UsingMemory Backup Output Level Adjustment With Source SignalsTo change the output level Dim FunctionTurn On Volume Level System SetupSemi-OSD Settings Front-Panel-Display FadeDefault Surround Mode Full-OSD Time Out AdjustmentFull-OSD Background Color To exit the menu systemBasic Tuner Operation Tuner OperationRDS Operation RDS TuningRDS Display Options Program Search PTYProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryProgrammed Device Functions Volume Punch-ThroughMacro Programming Channel Control Punch-Through Resetting the Remote MemoryFollowed by the AVR Input Selector Button , followed by the same InputDVD Function ListAVR DVD Processor Reset Troubleshooting GuidePower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Center Speaker Size Comp VVideo Table A4 Source Input Settings Harman Consumer Group, Inc
Related manuals
Manual 68 pages 55.01 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents