Harman-Kardon AVR 147 owner manual Full-OSD Time Out Adjustment, Default Surround Mode

Page 40

System Setup

Full-OSD Time Out Adjustment

The FULL OSD menu system is used to simplify the setup and adjustment of the AVR using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inac- tivity before they disappear from the screen or Time Out. This Time Out is a safety measure to prevent the menu text from burning into the CRTs in your monitor or projector, which might happen if they were left on indefinitely. However, some viewers may prefer a slightly longer or shorter period before the Time Out display.

To change the Full-OSD Time Out, you will need to make an adjustment in the SYSTEM SETUP menu (Figure 13). To start the adjust- ment, press the OSD button L to bring the MASTER MENU to the screen. Press the

⁄button D, until the on-screen ➞ cursor is next to the SYSTEM SETUP line. Press the Set Button F to enter the SYSTEM SETUP menu (Figure 13).

At the SYSTEM SETUP menu make certain that the on-screen ➞ cursor is next to the FULL OSD TIME OUT line by pressing the ⁄/¤ Buttons D as needed. Next, press the

‹/ › buttons E until the desired time is displayed in seconds. Note that unlike most of the other options in this menu, this is a permanent setting change, and the time-out entry will remain in effect until it is changed, even when the unit is turned off.

If you wish to make other adjustments in the menu, press the ⁄/¤ Buttons D until the on-screen ➞ cursor is next to the desired setting or the BACK TO MASTER MENU line and press the Set button F. If you have no other adjustments to make, press the OSD Button L to exit the menu system.

Default Surround Mode

In normal operation, when the AVR senses a Dolby Digital or DTS digital audio data stream, it will automatically switch the appropriate default surround mode, with the AVR responding to the data flags that are encoded on the DVD disc or in the digital video broadcast. In most cases, this is the correct mode, but you may have a particular preference for the mode you wish to hear when Dolby Digital or DTS is present. The AVR allows you to set the unit so that it will either respond to the default or switch to your desired mode.

If you wish to leave the default so that the mode choice encoded in the disc is always used, no further action is needed. Simply leave the setting at the factory default of ON.

To set the unit so that it responds to the last sur- round mode used when a Dolby Digital or DTS source is playing, press the ⁄/¤ Buttons D so that the ➞ cursor is pointing to the DEFAULT SURR MODE line. Press the ‹ / › Buttons E so that OFF appears, and the setting will change. The unit will now use the last mode, not the disc’s default for the two digitally encoded data streams.

This setting does not apply to standard PCM digital inputs or to analog sources. In those cases, the unit will always apply the surround or processing mode that was last used for that input.

If you wish to make other adjustments, press the ⁄/¤ Buttons D until the on-screen➞ cursor is next to the desired setting or the RETURN TO MASTER MENU line and press the Set Button F. If you have no other adjustments to make, press the OSD Button L to exit the menu system.

Full-OSD Background Color

When the full-OSD menu system is in use, the default display appears with a solid blue back- ground with white characters. If you wish, you may select a solid black background as the default. This setting may be changed by pressing the OSD Button L to display the MASTER MENU. Use the ⁄/¤ Buttons D to scroll down to the SYSTEM SETUP line, and press the Set Button F to select the SYSTEM SETUP submenu. Press the ⁄/¤ Buttons D again to scroll to the OSD BACKGROUND line. When BLUE appears, the full-OSD menus will appear on screen with a solid blue background. Press the ‹/› Buttons

Euntil BLACK appears to display the full-OSD menus on a solid black background instead.

This setting will be retained even when the AVR 147 is turned off to the Standby mode.

If you wish to make other adjustments, press the ⁄/¤ Buttons D until the on-screen➝ cursor is next to the desired setting or the BACK TO MASTER MENU line and press the Set Button F. If you have no other adjustments to make, press the OSD Button

Lto exit the menu system.

40SYSTEM SETUP

Page 39 Page 41
Image 40
Page 39 Page 41
Contents AVR 147 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionFive channels of high-current amplification Front panel analog A/V inputsImportant Safety Information Safety InformationUnpacking Headphone Jack $ Speaker/Channel Input Indicator Front Panel ControlsSee page 35 for more information on the Channel Indicators # Preset Stations Selector Press thisDigital Input Selector When playing a Rear Panel Connections Rear Panel Connections Main Remote Control Functions See page 23-24 for more information Main Remote Control Functions Main Remote Control Functions Installation and Connections Audio Equipment ConnectionsVideo Equipment Connections Connect the analog output of a CD player to the CD inputsHdmi Connections Scart A/V ConnectionsPower Connections AC Power ConnectionsImportant Note for Adapter Cables Important Notes for S-Video connectionsSpeaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnInput Setup Source Input Default Digital Audio Input› Navigation Button CoaxSurround Setup Configuring the Surround Off Stereo Modes Night Mode SettingsStereo-Direct Bypass Mode ‹/› Navigation Buttons EStereo-Digital Mode Automated Speaker Setup Using EzSet/EQTo take advantage of this feature, press System Configuration Speaker Setup Manual SetupSet Button F System Configuration Subwoofer Delay Settings ‹/› Navigation Buttons E to choose the appropriate setting¤ Button D once to move to the next line Output Level Adjustment ‹ / › Navigation Button E to enterVolume until you can hear the test noise clearly When all channels have the same output levelIs then pressed to select OFF in the highlighted video Until the word OFF appears to stop the test toneSystem Configuration Operation Surround Mode ChartMaximum bass impact Dolby 3 Stereo ReferenceWide Main speakers and a subwooferControls and Use of Headphones Basic OperationSource Selection Channel Direct InputSurround Mode Selection Digital Audio PlaybackRepeatedly to scroll through the list of available modes Until Surr OFF appears in the Main Information Display ÒSurround Mode Types Digital Bitstream IndicatorsPCM Audio Playback Selecting a Digital SourceSpeaker/Channel Indicators PCM Playback IndicationsSee Figure Incoming BitstreamIncoming Signal Available Surround Modes Night ModeIncoming Bitstream Available Surround Modes Using Tape RecordingOutput Level Adjustment With Source Signals Memory BackupTo change the output level Dim FunctionSystem Setup Turn On Volume LevelSemi-OSD Settings Front-Panel-Display FadeFull-OSD Time Out Adjustment Default Surround ModeFull-OSD Background Color To exit the menu systemTuner Operation Basic Tuner OperationRDS Tuning RDS OperationRDS Display Options Program Search PTYProgramming the Remote Programming the Remote with CodesCode Readout Direct Code EntryMacro Programming Volume Punch-ThroughProgrammed Device Functions Resetting the Remote Memory Channel Control Punch-ThroughFollowed by the AVR Input Selector Button , followed by the same InputFunction List DVDAVR DVD Troubleshooting Guide Processor ResetPower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Video Comp VCenter Speaker Size Table A4 Source Input Settings Harman Consumer Group, Inc
Related manuals
Manual 68 pages 55.01 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents