Harman-Kardon AVR 147 owner manual Automated Speaker Setup Using EzSet/EQ, Stereo-Digital Mode

Page 21

System Configuration

3.Press the ⁄/¤ Buttons D on the remote or the ‹/› Buttons 7 on the front panel to select the desired option. SUB NONE turns off the feed to the subwoofer, while SUB <L+R> turns it on.

4.When the desired setting has been entered, press the Set Button F@ to return to normal operation.

Stereo-Digital Mode

When the Stereo-Direct (Bypass) mode is in use a full range signal is always sent to the front left/right speakers. By its nature, that option does not pass the signal through the AVR’s digital signal processing, creating the requirement for full-range speakers. If your front speakers are bandwidth limited, “satellite”speakers, we recommend that you do NOT use the Bypass mode, but rather use the DSP SURROUND OFF mode for stereo listening.

To listen to programs in the two-channel stereo mode while taking advantage of the bass management system, press the Stereo Mode

Selector until SURROUND OFF appears in the Main Information Display Ò and the DSP and SURR. OFF Surround Mode Indicators ( both light up. When only the SURR. OFF Surround Mode Indicators

(is lit you are in the Stereo-Direct (Bypass) mode.

When this mode is in use, the front left/right speakers and subwoofer may be configured to meet the requirements of your specific speakers using the steps shown in the Speaker Setup section below.

The last option line in this menu is the setting to turn the unit’s upsampling feature on or off. In normal use, this feature is turned off, which means that digital sources are processed at their native sample rate. For example, a 48kHz digital source will be processed at 48kHz. However, the AVR allows you to upsample the incoming 48kHz signals to 96kHz for added resolution.

To take advantage of this feature, press the

⁄/¤ Navigation Button n so that the ➞ cursor is next to the UPSAMPLING line and press the ‹/› Navigation Button E so that ON is highlighted in reverse video. Note that this feature is only available for the Dolby Pro Logic II-Music, Dolby Pro Logic II-Movie,

Dolby Pro Logic and Dolby 3 Stereo modes.

Automated Speaker Setup

Using EzSet/EQ

The AVR 147 is one of the first receivers in its class to offer automated speaker setup and sys- tem calibration. This process greatly simplifies the installation of your new receiver by using a series of test signals and the power of an advanced digital signal processing system to eliminate the need for manual adjustment of speaker “size”, crossover, delay and output level settings, while adding the power of a multi-band parametric equalizer to smooth out any peculiarities in frequency response that may result from the characteristics of the listening room. With EzSet/EQ your new receiver even alerts you to errors in speaker connections that prevent a speaker from functioning.

With EzSet/EQ you are able to calibrate your system in a fraction of the time it would take to enter the settings manually, and with results that rival those achieved with expensive test equip- ment and time-consuming procedures. The end result is a system calibration profile that enables your new receiver to deliver the best possible sound, no matter what type of speakers you have or what the dimensions of your listening room are.

We recommend that you take advantage of the precision of EzSet/EQ to calibrate your system, but if desired you may also make any of the configuration settings manually, or trim the settings provided by EzSet/EQ by following the instructions on pages 23 through 27.

If you wish to configure your AVR manually, or if for some reason your EzSet/EQ microphone is unavailable, you may still do so by following the instructions on pages 23 through 27.

Step 1: EzSet/EQ requires that your listening room have as little background noise as possible to avoid interfering with the measurement of tones produced by your AVR during the setup procedure. Turn off all loud fans, air conditioners and other equipment, and try to avoid making any noise during the process.

Step 2: The EzSet/EQ microphone should be placed in either your usual listening position or, if there is a large seating area, the center of the room, at the listeners’ ear level. You may find it convenient to use a camera tripod for stable placement of the EzSet/EQ microphone at the correct height. The microphone includes a thread- ed insert on the bottom for tripod mounting.

Step 3: Plug the EzSet/EQ microphone into the AVR 147’s Headphone Jack 4, making certain that the mini-plug to 1/4" phone plug adaptor supplied with the microphone is firmly connected. The microphone cable is approximately 7 meter long, which should accommodate most listening room situations. If required, you may use an

optional extension cable, available at most elec- tronics stores, for use in larger rooms. However, we recommend that you avoid using extension cords for the microphone cable, as they may adversely affect the test results.

Step 4: Once the microphone is properly posi- tioned and plugged in, proceed to the EzSet/EQ menus by first pressing the OSD Button L to bring the Master Menu to the screen. Next, press the ⁄/¤ Navigation Buttons D to move the on-screen cursor to the EZSET/EQ menu line. Press the Set Button F to move to the next screen (Figure 7a).

Step 5: The first screen of the EzSet/EQ system will now appear to remind you to plug in the microphone. If you have not already done so, plug the microphone into the Headphone Jack

4as described in steps 2 and 3. When you are ready to proceed, make certain that the cursor is pointing to YES and press the Set Button F. If you do not wish to continue with the EzSet+ process, press the ‹/› Navigation Buttons E and then press the Set Button F to return to the MASTER MENU. Note that if you attempt to move to the next menu without plugging in the microphone, a reminder message will flash at the bottom of the screen.

Figure 7a

Step 6: After entering YES to start the EzSet/EQ system, you will next see a brief warn- ing message, and the screen will then change to the main EzSet/EQ menu. The WARNING screen is a reminder that in order for the system to per- form accurate measurements, it is important that the listening room be as quiet as possible.

After 5 seconds, the screen will change again to display the main EzSet/EQ menu (Figure 7b).

Figure 7b

IMPORTANT NOTE: Anyone with hearing that is sensitive to loud noises should leave the room at this point, or use ear protection sufficient to

ENGLISH

SYSTEM CONFIGURATION 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents AVR 147 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesFive channels of high-current amplification Front panel analog A/V inputsSafety Information Important Safety InformationUnpacking Front Panel Controls Headphone Jack $ Speaker/Channel Input Indicator# Preset Stations Selector Press this See page 35 for more information on the Channel IndicatorsDigital Input Selector When playing a Rear Panel Connections Rear Panel Connections Main Remote Control Functions See page 23-24 for more information Main Remote Control Functions Main Remote Control Functions Audio Equipment Connections Installation and ConnectionsVideo Equipment Connections Connect the analog output of a CD player to the CD inputsScart A/V Connections Hdmi ConnectionsAC Power Connections Power ConnectionsImportant Note for Adapter Cables Important Notes for S-Video connectionsSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnSource Input Default Digital Audio Input Input Setup› Navigation Button CoaxSurround Setup Night Mode Settings Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode ‹/› Navigation Buttons EAutomated Speaker Setup Using EzSet/EQ Stereo-Digital ModeTo take advantage of this feature, press System Configuration Manual Setup Speaker SetupSet Button F System Configuration Subwoofer ‹/› Navigation Buttons E to choose the appropriate setting Delay Settings¤ Button D once to move to the next line ‹ / › Navigation Button E to enter Output Level AdjustmentWhen all channels have the same output level Volume until you can hear the test noise clearlyIs then pressed to select OFF in the highlighted video Until the word OFF appears to stop the test toneSystem Configuration Surround Mode Chart OperationMaximum bass impact Reference Dolby 3 StereoWide Main speakers and a subwooferBasic Operation Controls and Use of HeadphonesSource Selection Channel Direct InputDigital Audio Playback Surround Mode SelectionRepeatedly to scroll through the list of available modes Until Surr OFF appears in the Main Information Display ÒDigital Bitstream Indicators Surround Mode TypesPCM Audio Playback Selecting a Digital SourcePCM Playback Indications Speaker/Channel IndicatorsSee Figure Incoming BitstreamNight Mode Incoming Signal Available Surround ModesIncoming Bitstream Available Surround Modes Tape Recording UsingMemory Backup Output Level Adjustment With Source SignalsTo change the output level Dim FunctionTurn On Volume Level System SetupSemi-OSD Settings Front-Panel-Display FadeDefault Surround Mode Full-OSD Time Out AdjustmentFull-OSD Background Color To exit the menu systemBasic Tuner Operation Tuner OperationRDS Operation RDS TuningRDS Display Options Program Search PTYProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryVolume Punch-Through Macro ProgrammingProgrammed Device Functions Channel Control Punch-Through Resetting the Remote MemoryFollowed by the AVR Input Selector Button , followed by the same InputDVD Function ListAVR DVD Processor Reset Troubleshooting GuidePower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Comp V VideoCenter Speaker Size Table A4 Source Input Settings Harman Consumer Group, Inc
Related manuals
Manual 68 pages 55.01 Kb Manual 2 pages 42.45 Kb

AVR 147 specifications

The Harman-Kardon AVR 147 is an entry-level receiver designed for those who seek quality audio and video experiences without overcomplicating their setup. This model is part of Harman-Kardon's well-known line of audio-video receivers, designed to provide an immersive home theater experience.

At the heart of the AVR 147 is its 5.1 channel surround sound capability, allowing for the connection of up to five speakers plus a subwoofer. This configuration enables a rich sound field that envelops listeners, ideal for both movies and music. The receiver can deliver up to 40 watts per channel, providing sufficient power for a modest home theater setup. The incorporation of Dolby Digital and DTS decoding ensures that users can enjoy their favorite movies with cinematic sound quality.

One of the main features of the AVR 147 is its user-friendly interface. The simplified remote control and intuitive on-screen menu make it easy for users to navigate settings and optimize sound performance. The receiver also offers multiple inputs, including HDMI, component, composite, and optical connections, ensuring compatibility with a wide range of audio and video sources, such as Blu-ray players, gaming consoles, and streaming devices.

The AVR 147 is equipped with Harman Kardon’s proprietary technologies, including the Advanced DSP (Digital Signal Processing), which enhances audio quality and clarity. Moreover, it supports various surround sound formats, allowing users to enjoy an enhanced home theater experience tailored to their preferences.

Another noteworthy characteristic is its sleek, modern design, which blends seamlessly into any entertainment setup. With its front panel display, users can easily see their settings and selections. The robust build quality of the AVR 147 ensures durability and longevity, making it a wise investment for those passionate about audio-visual technology.

In terms of video accessories, the AVR 147 can upscale standard-resolution video sources to provide a better viewing experience. Although it lacks some of the advanced features found in higher-end models, the AVR 147 remains a commendable choice for anyone seeking an effective and powerful home theater solution without excessive complexity. Whether you're watching movies, playing video games, or enjoying your favorite music, the Harman-Kardon AVR 147 is a reliable companion in elevating home entertainment experiences.
Top Page Image Contents