GE GXSF39E, GXSF35E Programming the Control, SET Water Hardness Number Salt, Time

Page 9

GEAppliances.com

Programming the Control

CONTROL SETTINGS REQUIRED upon installation and after an extended power outage.

NOTES:

■WHEN THE TRANSFORMER IS PLUGGED INTO THE ELECTRICAL OUTLET, 12:00 PM (flashing), and an arrow is displayed next to PRESENT TIME on the faceplate decal. The blue indicator light will also flash. Program the control as instructed below.

■If - - - is flashing, use the UP button to set the correct F or H code as follows: F35 for GXSF35E or F39 for GXSF39E. If you pass by the correct code

number, use the DOWN button. Then press the MODE button to accept the correct model.

■A “beep” sounds while pressing buttons for control programming. One beep signals a change in the control display. Repeated beeps mean the control will not accept a change from the button you have pressed, and you should select another button.

■To program the control, you will use the UP , DOWN and MODE buttons.

■Use the MODE button to scroll arrow to desired control function.

SET PRESENT TIME OF DAY

LEVEL

 

SALT

PM

1.Press the MODE button until arrow points to PRESENT

TIME.

2.Press UP or DOWN button to set. The UP button advances the time; the DOWN button moves the time in reverse.

2.If the present time is between noon and midnight, be sure PM shows in the display. If the present time is between midnight and noon, be sure AM shows in the display.

NOTE: Each press of an UP or DOWN button changes the time by one minute. Holding the button changes the time at a rapid rate.

3.When the present time is correct, press MODE to accept.

SET WATER HARDNESS NUMBER SALT

LEVEL

1. Press the MODE button until arrow points to HARDNESS.

2.Press UP or DOWN button

to set your water hardness number in the display. DOWN decreases the hardness value. UP increases the hardness value.

NOTE: Each press of a button changes the display by 1, between 1 and 25. Above 25, the display changes 5 at a time (25, 30, 35, etc.). Holding a button in changes the numbers at a rapid rate.

3.When the display shows your water hardness (in grains per gallon), press MODE to accept.

NOTE: If there is clear water iron in your water supply, you will need to increase the hardness setting by 5 for each 1 ppm of clear water iron in your water supply.

You can get the grains per gallon (gpg) hardness of your water supply from a water analysis laboratory. If you are on a municipal supply, call your local water department. Or call Legend Technical Services, an independent laboratory, to request a water hardness test kit at 1.800.826.8553, extension 47. If your report shows hardness in parts per million (ppm) or milligrams per liter (mg/l), simply divide by 17.1 to get the equivalent number of grains per gallon.

SET RECHARGE (STARTING) TIME

SALT

AM

 

 

 

LEVEL

 

1.Press the MODE button until

arrow points to RECHARGE

TIME.

NOTE: A flashing 2:00 AM (factory default) should show in the display. This is a good time for recharge to start (takes about 2 hours) in most households because water is not in use. HARD WATER is bypassed to house faucets during recharge.

If no change is needed, go to step 3. To change the recharge starting time, follow step 2.

2.Press UP or DOWN button to set the desired recharge start time. Be sure to observe the AM or PM as you did when setting the time of day.

NOTE: Each press of a button changes the time by 1 hour. Holding the buttons in changes the time at a rapid rate.

3.Press the MODE button to accept.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # 7247174 215C1173P010 49-5015102-05 JRSafety Precautions Installation instructions Important Installation RecommendationsUnpacking and Inspection Plan How You Will Install the Softener Where to Install the SoftenerTools and Materials Required for Installation Typical Installation Illustration Optional 3-Valve Bypass Installation IllustrationGEAppliances.com Step-by-step installation instructions Install Bypass ValvePlumb in and OUT Pipes to and from Softener Install the Brine Tank Overflow Fittings and Hose 4A. Connecting a Rigid Valve Drain TubeConnect and RUN the Valve Drain Hose With local codesInstall Grounding Clamp Connect to Electrical PowerADD Water and Salt to the Brine Tank SET Water Hardness Number Salt Programming the ControlTime SET Recharge Starting TimeDays to Empty SET Salt LevelPress UP or Down Days to EMPTY. RechargeLost Time Signal Optional Control SettingsLOW Salt Signal Error SignalsSpecifications/Dimensions Sanitizing ProceduresAbout the water softener system Do not overtighten the cap Breaking a Salt BridgeFeature Memory Feature Optional Recharge ControlsFeature/Service Automatic Electronic Diagnostics Normal Operation, Control DisplaysService Timer/Softener, Service Checkout Procedure Service Electronic Demand Time Features and ServiceError Code Displayed Visual ChecksPosition Switch Operation Service Set Model F or H CodeIf the water softening system does not draw brine, check Cleaning Iron Out of the Water Softening System Care and cleaning of the water softening systemChecking the Salt Storage Level and Refilling However, you must keep the tank supplied with saltNo soft water Before you call for service…Not using any salt After installationWater feels slippery Water softening systemWhen power applied Brown/yellow colored Water after installationSalty tasting or Brown/yellowGEAppliances.com Parts list GEAppliances.com General Electric Parts Catalog Parts catalogSupport Screen What Is Not Covered For The Period Of We Will ReplaceWarrantor General Electric Company. Louisville, KY For The Period We Will Replace GE Water Softening System Warranty. For Customers in CanadaPage Información de seguridad Instrucciones para la Advertencia No use con agua que AdvertenciaAdvertencia No use con Instrucciones de instalaciónDesempacado e inspección Recomendaciones importantes para la instalaciónPlanifique la instalación del Descalcificador Dónde instalar el DescalcificadorHerramientas y materiales necesarios para la instalación Principal Ilustración de instalación normalInstale LA Válvula DE Bypass Instrucciones de instalación paso por paso4A. Cómo Conectar UN Tubo DE Drenaje DE Válvula Rígida RegresivoInstale LAS Abrazaderas DE Tierra Agregue Agua Y SAL AL Tanque DE SalmueraConectar a LA Fuente Eléctrica Ajuste LA Hora DEL DÍA Programación del controlDEL Agua Ajuste LA Hora DE InicioDías Para Desocupar Ajuste EL Nivel DE SALAjustes opcionales de control Señales DE ErrorSeñal DE Hora Perdida Señal DE Bajo Nivel DE SALEspecificaciones/Dimensiones Advertencia Si usted drenaProcedimientos de desinfección Sobre el sistema de descalcificación de agua Cómo romper un puente de sal Junta Tapón de flujo Cómo limpiar la ensambladura de la boquilla y el VenturiFunción Memoria Operación normal, Pantalla de controlCaracterística/Servicio Diagnosis electrónica automática Recargue Esta NocheInspecciones Visuales VisualizadoServicio Diagnóstico electrónico iniciado manualmente Alarm alarma de bajo nivel de salOperación DE Diagnóstico Operación del interruptor de posiciónEl botón Mode modo Servicio Configurar el código del modelo F o HServicio Inspección manual del avance de la recarga Presione el botón Recharge recargoPrecaución Cuidado y limpieza del sistema de descalcificación de aguaNo hay agua Antes de llamar para solicitar servicio…Descalcificada La válvula de bypass manual está en la posición de bypassEstá dura Veces el aguaEl agua se siente Resbalosa después de laEstá regenerando Descalcificación noAgua turbia en la Cristalería en losDays to Empty Notas Lista de partes GEAppliances.com Catálogo DE Partes DE General Electric Catálogo de partesCubierta DE LA Válvula Notas GEAppliances.com Por el período de Reemplazamos Garantía GE para el Sistema de Descalcificación de AguaLo que no está cubierto Garante General Electric Company. Louisville, KYSolicite una reparación Soporte al Consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesoriosParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio

GXSF39E, GXSF35E specifications

The GE GXSF35E and GXSF39E are sophisticated water filtration systems designed to meet the diverse needs of residential consumers. Offering reliable water purification solutions, these models efficiently remove impurities, ensuring clean and safe water for household use.

Both the GXSF35E and GXSF39E units feature advanced filtration technology, specifically designed to target a broad spectrum of contaminants, including chlorine, sediment, lead, and other harmful substances. The filtration process effectively enhances the taste and smell of drinking water, allowing families to enjoy fresh and clean water directly from their taps.

One of the standout features of these models is their high-capacity filtration capabilities. The GXSF35E boasts a 35,000-gallon capacity, making it suitable for medium to large households. Conversely, the GXSF39E, designed for larger families, offers an impressive 39,000-gallon capacity. This extended capacity ensures that users have access to purified water for an extended period, reducing the frequency of cartridge replacements and associated maintenance.

In terms of technical specifications, both models utilize a unique dual-stage filtration system. The first stage consists of a high-performance sediment filter that captures large particles and sediments, while the second stage employs an activated carbon filter that removes chemical contaminants and enhances taste. This two-tiered approach ensures comprehensive purification and longevity of the filter media.

Another major characteristic of the GXSF35E and GXSF39E is their user-friendly design. With features such as easy installation processes, intuitive control panels, and filter change indicators, these systems cater to users with varying levels of technical expertise. The compact design of the units allows for versatile installation options, whether in basements, under sinks, or in utility rooms.

Both models are also equipped with smart technology, enabling users to monitor filter life through mobile applications or digital displays. This connectivity feature ensures that homeowners are well-informed when it’s time to replace filters, enhancing the system's overall efficiency and effectiveness.

In conclusion, the GE GXSF35E and GXSF39E water filtration systems stand out in the market due to their efficient filtration technologies, high capacity, user-friendly features, and smart monitoring capabilities. They provide an excellent solution for families seeking safe and clean drinking water without the hassles associated with traditional filtration methods.
Top Page Image Contents