GE 215c1002p004-4 owner manual Specification guidelines, About the reverse osmosis system

Page 4

Instructions

Specification guidelines.

Product – height 16width 17depth 6

The system makes a good supply of drinking water each day. How much it will make depends primarily on these things…

Safety

Instructions

1 Feed water pressure—pounds per square inch (psi) 40–125

2 Feed water temperature limits—minimum/maximum degrees F. 40–100

3 Water quality

Maximum Total Dissolved Solids (TDS)—parts per million (ppm) 2000

Maximum water hardness @ 6.9 pH—grains per gallon (gpg) 10

For water with hardness greater than 10 grains (at 6.9 pH) the use of a softener is recommended. Failure to install a water softener will reduce the life of the Reverse Osmosis membrane. See chart for additional information on the possible need for a water softener.

Maximum iron, manganese, hydrogen sulfide (ppm) <0.1

Incoming phWater

8

7.5

7

6.5

6

Water Softener Chart

WATER SOFTENER RECOMMENDED

Water Softener

not required

10

20

30

40

50

60

Operating

Troubleshooting Tips

Customer Service

Chlorine in water supply

INCOMING WATER HARDNESS (GPG)

Allowable*

 

Feed water pH limits (pH)

 

4–10

 

Percent rejection of TDS, minimum (new membrane)**

 

92

 

*Chlorine removed (maximum of 2.0 ppm) by the Reverse Osmosis prefilter…regular changing of the prefilter is required. Chlorine will destroy the Reverse Osmosis membrane.

**Feed water at 50 psig and 77°F. with 750 ppm sodium chloride. Quality water production, amount of waste water and percent rejection all vary with changes in pressure, temperature and Total Dissolved Solids.

On average you should expect your Reverse Osmosis system to be able to deliver 12 gallons of product per day, as tested by Water Quality Association Standard S-300. Output according to ANSI/NSF Standard 58 is 10 gallons per day. Process water used per gallon of water produced is four gallons.

About the reverse osmosis system.

What the Reverse Osmosis System Does

Reverse Osmosis removes Total Dissolved Solids (TDS) and organic matter from water by diffusing it through a special membrane. The membrane separates minerals and impurities from the water and they are flushed to the drain. High quality product water goes directly to the drinking water faucet or to the storage tank. The system makes a good supply of drinking water each day (see Specification guidelines). How much it makes depends on the feed water supply pressure, temperature, and quality.

The system includes an electronic faucet assembly with an integrated water testing feature. When water is taken from the faucet, a green indicator light means TDS removal is within the specified limits, and that water quality is good.

The prefilter and postfilter are replaceable cartridges. The carbon prefilter removes chlorine while also filtering sediments. The postfilter removes any other undesirable tastes and odors before you use the water.

4

Image 4
Contents Reverse Osmosis Part No C1002P004-4 Pub. No -5802-45 -98 CGSafety Information Operating Instructions Staple sales slip or cancelled check hereCongratulations You are Now Part of the GE Family Write the model and serial numbers hereSafety Precautions Specification guidelines About the reverse osmosis systemWhat the Reverse Osmosis System Does Maximum iron, manganese, hydrogen sulfide ppmOperating Instructions Faucet and Indicator Lights Care and cleaning of the reverse osmosis system To obtain replacement filters, call GE Appliance Parts atPrefilter and Postfilter Cartridge Replacement Activated CarbonReverse Osmosis Cartridge Replacement Sanitizing the Reverse Osmosis System Flow Control and Screen Purging the Reverse Osmosis SystemBefore you call for service… Problem Possible Causes What To DoChlorine taste and/or Odor in the ReverseOsmosis product water Other taste and/or odorWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Reverse Osmosis System Warranty GE Will Replace, At No Charge To YouWhat GE Will Not Cover Warrantor General Electric Company. Louisville, KYService Telephone Numbers GE Answer Center

215c1002p004-4 specifications

The GE 215C1002P004-4 is a high-performance electronic device that has gained prominence in various industrial and commercial applications. This component is part of General Electric's line of advanced technologies, reflecting the company's ongoing commitment to innovation and reliability.

One of the key features of the GE 215C1002P004-4 is its robust design, which allows it to operate efficiently in demanding environments. The device is engineered to withstand extreme temperatures and harsh conditions, ensuring longevity and dependable performance. This ruggedness makes it suitable for use in sectors such as manufacturing, aerospace, and energy.

In terms of technology, the GE 215C1002P004-4 boasts cutting-edge features that enhance its functionality. It incorporates advanced circuitry that enables precise control and monitoring capabilities. This is crucial for applications where accuracy is paramount, such as in industrial automation systems. The device also supports various communication protocols, making it versatile and compatible with a wide range of existing systems.

Another significant characteristic of the GE 215C1002P004-4 is its energy efficiency. As industries worldwide strive to reduce their carbon footprint and operational costs, the energy-efficient design of this device makes it an attractive option. It optimizes power consumption while maintaining high performance levels, aligning with modern sustainability goals.

The user interface of the GE 215C1002P004-4 is designed to be intuitive, facilitating easy operation and monitoring. This ease of use is crucial for technicians and operators who need to access real-time data and diagnostics to ensure optimal performance and quick troubleshooting.

Furthermore, the GE 215C1002P004-4 is compliant with various industry standards, ensuring that it meets rigorous safety and quality requirements. This compliance reinforces its reliability and bolsters customer confidence in its performance.

In conclusion, the GE 215C1002P004-4 is a versatile and efficient electronic device that stands out due to its rugged design, advanced technology, energy efficiency, and user-friendly interface. As industries continue to evolve, components like the GE 215C1002P004-4 play a vital role in driving innovation and improving operational efficiency across various sectors. Whether used in automation, control systems, or other applications, it exemplifies the quality and reliability that General Electric is known for.