GE 215c1002p004-4 owner manual Care and cleaning of the reverse osmosis system, Activated Carbon

Page 7

Care and cleaning of the reverse osmosis system.

To obtain replacement filters, call GE Appliance Parts at 800-626-2002.

Prefilter/Postfilter Cartridge Replacement FX12P

Activated Carbon

 

 

Reverse Osmosis Cartridge Replacement FX12M

Thin Film Polyamide

 

 

If the Reverse Osmosis filtration system is connected to your icemaker, YOU MUST turn off the icemaker by raising the feeler arm before servicing or changing the filters, or when purging the Reverse Osmosis system. Four hours after servicing, lower the feeler arm to resume icemaking.

When replacing cartridges you may lift the Reverse Osmosis assembly from the mounting washers and lay it on the floor. You can also remove the Reverse Osmosis housing by pulling it out of the mounting clamps.

CAUTION: Before servicing the Reverse Osmosis system, close the shutoff valve on the storage tank, close the water supply/saddle valve and open the RO water faucet. Allow the system to drain.

Prefilter and Postfilter Cartridge Replacement

When the amber “FILTER” light flashes the prefilter and postfilter cartridges must be replaced. The batteries in the control box must also be replaced.

 

Follow the steps in the Sanitizing the Reverse Osmosis System section except discard the old

1

 

filters and replace with new filters.

 

Replace the “AA” alkaline batteries in the control box. Good batteries are needed to ensure

2

 

proper indicator light operation. NOTE: Lights may not operate properly until system has been

allowed to refill the storage tank. Weak batteries may give a false indication. Changing the batteries resets the six month or 900 gallon period.

7

Safety Instructions

Operating Instructions

Troubleshooting Tips

Customer Service

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Part No C1002P004-4 Pub. No -5802-45 -98 CG Reverse OsmosisWrite the model and serial numbers here Safety Information Operating InstructionsStaple sales slip or cancelled check here Congratulations You are Now Part of the GE FamilySafety Precautions Maximum iron, manganese, hydrogen sulfide ppm Specification guidelinesAbout the reverse osmosis system What the Reverse Osmosis System DoesOperating Instructions Faucet and Indicator Lights Activated Carbon Care and cleaning of the reverse osmosis systemTo obtain replacement filters, call GE Appliance Parts at Prefilter and Postfilter Cartridge ReplacementReverse Osmosis Cartridge Replacement Sanitizing the Reverse Osmosis System Purging the Reverse Osmosis System Flow Control and ScreenProblem Possible Causes What To Do Before you call for service…Other taste and/or odor Chlorine taste and/orOdor in the Reverse Osmosis product waterWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Reverse Osmosis System WarrantyGE Will Replace, At No Charge To You What GE Will Not CoverGE Answer Center Service Telephone Numbers

215c1002p004-4 specifications

The GE 215C1002P004-4 is a high-performance electronic device that has gained prominence in various industrial and commercial applications. This component is part of General Electric's line of advanced technologies, reflecting the company's ongoing commitment to innovation and reliability.

One of the key features of the GE 215C1002P004-4 is its robust design, which allows it to operate efficiently in demanding environments. The device is engineered to withstand extreme temperatures and harsh conditions, ensuring longevity and dependable performance. This ruggedness makes it suitable for use in sectors such as manufacturing, aerospace, and energy.

In terms of technology, the GE 215C1002P004-4 boasts cutting-edge features that enhance its functionality. It incorporates advanced circuitry that enables precise control and monitoring capabilities. This is crucial for applications where accuracy is paramount, such as in industrial automation systems. The device also supports various communication protocols, making it versatile and compatible with a wide range of existing systems.

Another significant characteristic of the GE 215C1002P004-4 is its energy efficiency. As industries worldwide strive to reduce their carbon footprint and operational costs, the energy-efficient design of this device makes it an attractive option. It optimizes power consumption while maintaining high performance levels, aligning with modern sustainability goals.

The user interface of the GE 215C1002P004-4 is designed to be intuitive, facilitating easy operation and monitoring. This ease of use is crucial for technicians and operators who need to access real-time data and diagnostics to ensure optimal performance and quick troubleshooting.

Furthermore, the GE 215C1002P004-4 is compliant with various industry standards, ensuring that it meets rigorous safety and quality requirements. This compliance reinforces its reliability and bolsters customer confidence in its performance.

In conclusion, the GE 215C1002P004-4 is a versatile and efficient electronic device that stands out due to its rugged design, advanced technology, energy efficiency, and user-friendly interface. As industries continue to evolve, components like the GE 215C1002P004-4 play a vital role in driving innovation and improving operational efficiency across various sectors. Whether used in automation, control systems, or other applications, it exemplifies the quality and reliability that General Electric is known for.
Top Page Image Contents