Harman-Kardon HS 150 owner manual Troubleshooting

Page 28

Troubleshooting

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help you remedy the problem.

Should any problem persist, consult your authorized Harman Kardon dealer.

No power.

•Is the power cord firmly plugged into the power outlet?

•One of the safety mechanisms may be operating. In this event, unplug the player from the power outlet briefly and then plug it in again.

No picture.

•Check that the system is connected correctly and securely.

•The video cable may be damaged. Replace it with a new one.

•Make sure the system is connected to a video input on the TV (see page 14).

•Make sure the TV is turned on.

•Make sure the correct video input on the TV is selected for viewing with this system.

Noise (interference) appears in the picture.

•Clean the disc.

•If video from this system has to go through your VCR to get to your TV, the copy-protection applied to some DVD programs could affect picture quality. If you still experience problems after checking your connections, please try connecting your DVD system directly to your TV’s S-Video input, if your TV is equipped with this input (see page 14).

The aspect ratio of the screen is wrong (picture vertically expanded) when you play a wide picture even though you set “TV DISPLAY” in the SETUP menu to "16:9".

•If you connect the system with the SCART cable, connect directly to the TV. Otherwise the autoswitch function of the aspect ratio for the TV may not work.

•If the TV is not connected with a SCART cable to the HS, or if the autoswitch function does not work you should turn the TV to "16:9" (if possible with your TV).

•Depending on the TV, you may not be able to change the aspect ratio. In that case (TV not adjustable to 16:9) do not select "16:9" in the TV Display. Then, no change of the aspect ratio is needed.

There is no sound or volume is very low.

•Check that the speakers and components are connected correctly and securely.

•Make sure that you have selected the correct source on the system.

•Press MUTE on the remote control, if the words MUTE ON are blinking on the front panel display.

•The protective circuitry has been activated because of a short circuit. Turn off the system, eliminate the short circuit problem and turn on the power again.

•The audio interconnect is damaged. Replace it with a new one.

•The system is in pause mode or in slow-motion play mode, or fast forward or fast reverse. Press N to return to normal play mode.

•Check the speaker settings (see page 19).

The left and right channels are unbalanced or reversed.

•Check that the speakers and components are connected correctly and securely.

Severe hum or noise is heard.

•Check that the speakers and components are connected securely.

•Check that the connecting cords are away from a transformer or motor and at least 3 meters away from fluorescent light.

•Move your TV away from the audio components.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

•Clean the disc.

The volume goes down automatically and can not be increased.

•The internal temperature is too high. Wait approximately one minute for the amplifier to reach normal working temperature.

Radio stations cannot be tuned in.

•Check that the antenna is connected correctly. Adjust the antenna and connect an external antenna if necessary.

•The signal strength of the stations is too weak for automatic tuning. Use manual tuning.

•No stations have been preset.

•The tuner mode is not selected, select the Radio mode.

The remote does not function.

•Remove any obstacles between the remote control and the system.

•Move the remote control closer to the system.

•Point the remote control at the remote sensor on the front panel.

•Replace all the batteries in the remote control with new ones if they are weak.

•Check that the batteries are loaded correctly.

The disc does not play.

•There is no disc inside. (“NO DISC” appears on the front panel display and the TV screen.) Insert a disc.

•Insert the disc correctly with the playback side facing down on the disc tray.

•Clean the disc.

•The system cannot play CD-ROM's, etc. (see page 3).

•DVD with wrong region code (see page 13).

The system starts playing the DVD automatically.

• The DVD features the auto playback function.

Playback stops automatically.

•Some discs include an auto pause signal. When playing such a disc, the system stops playback at the signal.

28TROUBLESHOOTING

Page 27 Page 29
Image 28
Page 27 Page 29
Contents HS 150 Home Cinema System Table of Contents Declaration of ConformityIntroduction Description and FeaturesSimultaneous Playback of MP3 and Jpeg files Introduction / Safety Information Important Safety InformationTerminology TerminologyThis information is compressed DivXFeatures Power On/Off Standby Headphone Jack Eject Volume Control Front Panel Controls Main Information Display USB On-The-Go Input Eject Press this button to release a disc from the loaderDisc Type Indicators FVideo Format IndicatorsLights when a disc is playing in the normal mode Lights when the disc is pausedRear Panel Connections FM Antenna Connect to the supplied FM antennaRear Panel Connections Power On/Source Selection Button Remote ControlPower Off Button Subtitle Button Title Button Angle Button Mute Button Mutes the sound B Button Press to select section A-B and to play repeatedlyAbout This Manual Basic InformationRegional Coding Installation and Connections Connecting the TV and optional componentsAudio Equipment Connections Video Equipment ConnectionsSpeaker Placement Optional Audio ConnectionsConnecting the AC Power Disc Playback FeaturesFirst Turn On Basic PlaySurround Mode Slow Motion Playback with DVD onlyAbout DivX Movie Files Playing a DivX Movie DiscSystem Setup System DefaultsSet Up Menu System SettingsAudio Settings Audio AdjustmentFeel free to experiment with the settings at any time Output level adjustmentVideo Settings Video AdjustmentPress the Video Output Button on the remote control DivX Video On DemandTest Screen TV Picture Adjustment with Test ScreenTest Screen Using the Status Bar Menu Player/Radio MenuPlayer Menu Information DisplaysAuto Preset function Selecting presetsRemoving presets Radio MenuSurround Mode for Tuner RDS Station IDDolby Digital signals will be down-mixed to Surround Mode ChartUSB Menu Learning Codes from a Remote Learning Codes from a RemoteErasing Learned Codes Macro ProgrammingErasing Macro Commands DVD Language CodesMacro has been erased Language CodeTroubleshooting Important Safety Instructions Glossary HS 150 Controller Specifications Harman Consumer Group, Inc

HS 150 specifications

The Harman-Kardon HS 150 is a modern home audio system designed to deliver exceptional sound quality while seamlessly integrating into your living space. Known for its sleek and contemporary design, the HS 150 not only serves as a powerful audio solution but also enhances the aesthetic of any room it occupies.

One of the standout features of the HS 150 is its 2.1-channel sound system, which combines two high-performance satellite speakers with a dedicated subwoofer. This configuration ensures that users experience rich, full-bodied sound with deep bass, making it suitable for a variety of audio experiences from music listening to movie watching. The premium drivers and advanced audio engineering contribute to a clear and dynamic soundstage, showcasing the detailed nuances of every audio track.

Connectivity is another key highlight of the Harman-Kardon HS 150. It supports multiple input options, including Bluetooth, allowing for wireless audio streaming from smartphones, tablets, and other compatible devices. This wireless capability is complemented by a range of wired connectivity options such as USB and auxiliary inputs, ensuring flexibility in how users choose to connect their audio sources.

The HS 150 incorporates cutting-edge audio technologies, including Harman’s proprietary sound equalization, which automatically adjusts the audio output to fit the acoustics of the room. This feature provides an optimized listening experience, whether in a small apartment or a larger living space. Additionally, the system supports high-definition audio formats, ensuring that users can enjoy their favorite tracks in the quality intended by the artists.

Moreover, the HS 150 is designed for ease of use, featuring an intuitive interface and remote control for seamless navigation of functions. The minimalistic yet sophisticated design means the system can function as a stylish piece of decor, blending in harmoniously with various interior styles.

In summary, the Harman-Kardon HS 150 is a versatile audio system that excels in sound performance while prioritizing aesthetics and connectivity options. With its powerful 2.1-channel setup, advanced audio technologies, and user-friendly features, it stands as an excellent choice for audiophiles and casual listeners alike, enhancing both music and home entertainment experiences.
Top Page Image Contents