Brother CS-770 operation manual Accessories, Optional accessories

Page 10

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

ACCESSORIES

The following accessories are stored in the flat bed attachment. We have designed these accessories to help you be able to carry out most sewing tasks.

Note

(For U.S.A. only)

●Foot controller: Model T

This foot controller can be used on the following machine models: CS-100, CS-6000, CS-6000i, CS-4000, ES-2400, ES-2000, EX-660, CE-4000, BC-1000, HS-1000, XR-7700, CE-5000PRW, SM-6500PRW, CS-770

●The screw of the presser foot holder is available through your authorized dealer. (Part code: 132730-122)

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

75/11 1 needle 90/14 1 needle 100/16 1 needle

	No.	Part Name	Part Code		No.	Part Name	Part Code
			U.S.A. / Canada	Others			U.S.A. / Canada	Others
	1	Buttonhole foot “A”	XC2691-031		9	Bobbin (4)	SA156	XA5539-151
	2	Overcasting foot “G”	XC3098-031		10	Needle set	XC8834	-021
	3	Monogramming foot “N”	X53840-331		11	Twin needle	131096-121
	4	Zipper foot “I”	X59370-021		12	Cleaning brush	X59476-021
	5	Zigzag foot “J” (on machine)	XC3021-031		13	Screwdriver	X55467-021
	6	Blind stitch foot “R”	XC4051-031		14	Extra spool pin	130920-021
	7	Button fitting foot “M”	X59375-121		15	Foot controller	XD0501-021 (EU area)
	8	Seam ripper	X54243-001				XC8816-021 (Other areas)

Optional accessories

1.

2.

3.

4.

5.

	No.	Part Name	Part Code		No.	Part Name	Part Code
			U.S.A. / Canada	Others			U.S.A. / Canada	Others

	1	Walking Foot	SA140	F033N:	4	Quilting guide	SA132	F016N:
				XC2214-002				XC2215-002

	2	Quilting Foot	SA129	F005N:	5	Eyelet punch	135793-001
				XC1948-002

	3	1/4-Inch Quilting	SA125	F001N:
		Foot		XC1944-002

8

Image 10

Contents Computerized Sewing Machine Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only For a longer service life For safe operationContents Utility Stitches Names of Machine Parts and Their Functions Main partsOperation buttons Needle and presser foot sectionButtons provided on some models Flat bed attachment Operation panelASlideopen theit. flat bed attachment to the left to Accessories Optional accessoriesBSet the main power switch to Using Your Sewing MachinePower supply precautions CTo turn off the machine, set the main power switch toFoot controller Changing the needle stop positionPass the thread around the pre-tension disk Threading the MachineWinding the bobbin ETurn on the sewing machineGTrim the excess thread above the bobbin For models equipped with the fast bobbin winding system CSlide the bobbin winder shaft to the rightLower threading Actual size 11.5mm 7/16 inch This modelRight side see arrow b until the cover clicks into place For models equipped with the quick-set bobbinUpper threading Thread take-up lever DFully lower the needle threader lever Catch the thread on the hook as shown belowFor models equipped with the quick-set bobbin Drawing up the lower threadLightly hold the end of the upper thread Needle types and their uses Needle precautionsReplacing the Needle FabricsCorrect needle Checking the needleReplacing the needle Incorrect needleInstalling the needle clamp Sewing with a twin needle Twin needle threadingReplacing the presser foot Replacing the Presser FootMark on the wheel points up. With models Attaching the presser foot holder Removing the presser foot holderRemoving the presser foot holder Remove the presser footGeneral sewing procedure SewingTurn on the sewing machine DIfwidth.necessary, adjust the stitch lengthSelecting stitching CAttach the presser footOn the wheel points up. With models equipped Starting to sewBRaise the presser foot lever Correct tension Thread tensionSewing reinforcement stitches Upper tension is too tightChanging the sewing direction Useful Sewing TipsTrial sewing Sewing curvesSewing stretch fabrics Using a free-arm styleSewing thin fabrics Slide the flat bed attachment to the left to release itOvercasting Stitches Attach overcasting foot G or zigzag foot J Select a stitchBasic stitching When sewing is finished, cut the threadBasic Stitching Changing the needle positionBAttach blind hem foot R CSelect a stitch Blind HEM StitchingIf the needle does not catch the hem fold Buttonhole Sewing Buttonholes can be sewn and buttons can be sewn onSize of the buttonhole is set If the button does not fit in the button guide plateFPullpossible.down the buttonhole lever as far as Sewing buttonholes on stretch fabrics Button sewingCAttach presser foot M ESelect a stitch With stitch Select stitchZipper Insertion Rev. ReverseStretch stitching Sewing Stretch Fabrics and Elastic TapeElastic attaching APPLIQUÉ, Patchwork and Quilt Stitching AppliquésPatchwork crazy quilt stitching PiecingBaste the fabric to be quilted Using the optional quilting guideQuilting DSelect stitch , orFree-motion quilting GAfter sewing is finished, slide the feed dogBar tack stitching Reinforcement StitchingTriple stretch stitching Attach zigzag foot J Select stitch Start sewingOnce sewing is completed, Pullpossible.down the buttonhole lever as far asDecorative Stitching Scallop stitching FagotingDTrim along the stitches Sew parallel stitching at intervals of 1 cm 3/8 inch SmockingShell tuck stitching DPull the bobbin threads to create gathersHeirloom stitching JoiningUnfold the fabric, and then iron the tucks down to one side Stitch Settings Utility stitchesRfc. Reinforcement Pattern No Rfc Binding Appendix Cleaning the machine surface MaintenanceCleaning the bobbin case Remove the bobbin case Troubleshooting Thread ten LowerOr breaks Fabric isThere is a high Stitches areSkipped Pitched noise While sewingError Messages Operation beep for models equipped with the operation beepIndex Numerics30, 32 Page English 885-S33/S34/S36/S37 XC8835-7219